2013 BMW 750Li Wheels and Tires
More 2013 BMW 750Li Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2013 BMW 750Li, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2013 BMW 750Li Wheels and Tires
Febi – Wheel Hub (Part No.K7000570436FEB)
from
$171.12
FEBI manufactures OE quality wheel hub assemblies that provide superior performance and durability.
Product Features:
See More
Product Features:
- OE Quality
- High quality steel and surface finishes
- Proper implementation of heat treatment
- Precise engineered hub surface provide maximum load capacity and durability
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 433MHz (Part No.UVS4041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 433 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.5 Thread Size) (Part No.67205)
from
$279.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27305)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27205)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Beck/Arnley – Wheel Bearing (Part No.051-4182)
from
$173.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Includes necessary hardware for a complete installation
- Hardware matches original design requirements
- Made with high quality materials for durability
- Application specific for this vehicle
Carquest Premium – Hub Assembly with Wheel Bearing 91-326399 (Part No.91-326399)
from
$101.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
VDO – Valve Stem Cap (Part No.O82241576281VDO)
from
$7.98
Valve Stem Cap
McGard – Black Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.
McGard – Black Cone Seat Style Lug Bolt (M14 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69705BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40.
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Aluminum Valve 56mm (Part No.RDV025)
from
$10.49
Product Features:
See More
- Silver
- Adjustable 0-36 degrees
- High quality coating to prevent corrosion
- Only one tool needed (35 in-lbs)
Huf North America – Aluminum Valve 51mm (Part No.RDV024)
from
$9.49
Product Features:
See More
- Silver
- Adjustable 0-36 degrees
- High quality coating to prevent corrosion
- Only one tool needed (35 in-lbs)
Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
Continental – TPMS Service Kit (Part No.SE54830)
from
$11.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
See More
Xtra Seal – Parts Kit For Imports (Part No.15-20211)
from
$1.99
Parts Kit For Imports
Xtra Seal – Parts Kit For Imports (Part No.17-20211AK)
from
$27.49
Parts Kit For Imports
Huf North America – TPMS Valve Assembly (Part No.O8208321414HUF)
from
$11.02
TPMS Valve Assembly
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 48Mm Ball-Seat Valve; Green Marking, 1 Piece (Part No.1093)
from
$15.99
Clamp-In TPMS Service Kit: Metal, 48Mm Ball-Seat Valve; Green Marking, 1 Piece
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring, 25 Piece (Part No.1096)
from
$12.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Ball-seat valve stem assembly with internal shear ring
- 43mm/0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513173)
from
$129.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT513173)
from
$47.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Driveworks – Wheel Bearing and Hub Assembly (Part No.NT590392)
from
$86.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Popular 2013 BMW 750Li Wheels and Tires Categories
2013 BMW 750Li Wheels and Tires
You count on your 2013 BMW 750Li to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 50 Wheels and Tires ranging in price from $1.99 to $7,321.99, you’re sure to find everything you need for your 2013 BMW 750Li.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 15 different brands like Autel, Schrader, and Dorman. 2013 BMW 750Li Wheels and Tires start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 78 extensive product reviews on 2013 BMW 750Li Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty with 5.0 stars and Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2013 BMW 750Li below to get started!
Top-Rated Wheels and Tires Brands For Your 2013 BMW 750Li
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 BMW 750Li running right for years to come. In our inventory you’ll find brands like Autel, Schrader, Dorman, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensors. All are waiting to get your 2013 BMW 750Li back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$12.99
(2)
Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring, 25 Piece
Tire Pressure Sensor Valves
Top-Rated Schrader Wheels and Tires
If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2013 BMW 750Li, and some of our most reviewed Schrader parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 2013 BMW 750Li Wheels and Tires
What are the most purchased Wheels and Tires for the 2013 BMW 750Li?
Out of 50 Wheels and Tires for the 2013 BMW 750Li, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Tire Pressure Sensors
What are the top-rated 2013 BMW 750Li Wheels and Tires?
Top-rated Wheels and Tires for your 2013 BMW 750Li based on customer reviews/ratings are:
from
$92.99
(1)
Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty
“Interacts with BMW air pressure system great.”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
