from

$58.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$79.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$44.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$47.05

Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
External core made from oriented silicon steel ensures durability and longevity
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion
High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
Silicone rubber boot withstands extreme heat to ensure superior insulation

from

$37.52

Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:

Improved dwell accuracy decreases module and coil temperatures for greater reliability
Noise abatement material between laminations reduces audible coil noise
Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
Lower primary inductance provides high-speed performance
Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
Direct connection to spark plugs (via small boot) eliminates spark plug wires
Composite iron coils provide programmable energy
Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
Radio frequency interference (RFI)suppressor optional

from

$164.62

The VDO OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:

OEM quality direct fit application
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Mounting hole is the same size as OE
Maintains OE specifications for frequency response

from

$242.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$6.29

IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:

Unique friction technology provides efficient and noise-free operation
Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life

from

$7.53

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$21.74

NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.

Product Features:

Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
Corrugated Ribs Prevent Flashover
Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
Copper Core Aids in Heat Removal
Triple Seals Prevent Leakage

from

$28.99

NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:

ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs

2013 BMW 640i Gran Coupe Ignition and Tune-Up Products

More 2013 BMW 640i Gran Coupe Ignition and Tune-Up Products Categories

Essential 2013 BMW 640i Gran Coupe Ignition and Tune-Up Products

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48705)

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48888)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1006)

Carquest – Ignition Coil (Part No.E1092)

Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005451026DEL)

VDO – Knock Sensor (Part No.F6020304256VDO)

Carquest Premium – Knock Sensor (Part No.SBC3939)

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Elring – Spark Plug Seal (Part No.A8027521294ELR)

NGK – Laser Iridium Spark Plug (Part No.F10001191231NGK)

NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKBR8D8S (Part No.97506)

Popular 2013 BMW 640i Gran Coupe Ignition and Tune-Up Products Categories

2013 BMW 640i Gran Coupe Ignition and Tune-Up Products

Top-Rated Ignition and Tune-Up Products Brands For Your 2013 BMW 640i Gran Coupe

Popular Delphi Ignition and Tune-Up Products

FAQs for 2013 BMW 640i Gran Coupe Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2013 BMW 640i Gran Coupe?