2013 BMW 640i Cooling and Climate Controls

Below you will find various in-demand BMW Cooling and Climate Controls, components and accessories for your 2013 640i. Advance Auto Parts has popular 640i parts like Air Conditioning Parts, HVAC Electrical Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 640i model years including 2012, 2014, 2015, 2016, 2017, 2018 and more. Select a category of 2013 BMW 640i Cooling and Climate Controls below and start saving instantly.

Popular 2013 BMW 640i Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Coolant Reservoirs

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

Accumulator and Receiver Driers

ABS Speed Sensors

Radiator Mounts

Water Pump Gaskets

HVAC Heater Assemblies

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

HVAC Blower Motor Regulators

AC Drive Belt Tensioner Pulleys

Coolant Level Sensors

Heater Core Temperature Sensors

Heater Core Seals

HVAC Blower Motor Covers

Engine Coolant Thermostat Housing Bolts

Essential Cooling and Climate Controls for 2013 BMW 640is

from

$205.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$638.73

A/C Compressor

from

$276.35

Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$668.09

The Pierburg water pump is a 100% new replacement that contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Resistant to corrosion.
Unitized bearing assembly.

from

$186.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”.
Engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

from

$5.81

Water Pump Bolt Set

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$169.90

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$87.99

Engine Coolant Temperature Sensor

from

$21.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$27.06

Coolant Level Sensor

from

$15.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$265.77

Heater Valve

from

$497.47

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

OE-Equivalent
Direct fit for easy installation.
High quality corrosion resistant materials.
OE Style mounting brackets and hose connections.
Mechanically bonded aluminum core.
Integrated transmission oil cooler when applicable.

from

$43.45

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$141.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$159.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$144.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$76.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$676.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$14.49

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$57.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$129.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$94.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$123.45

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

Upgrade your 2013 BMW 640i with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 BMW 640i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 640i functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Cooling and Climate Controls for the 2013 BMW 640i, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to HVAC Electrical Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2013 BMW 640i at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.08 to $854.99, with an average price of $187.44. Our 58 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 2013 BMW 640i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 BMW 640i, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Imperial, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $14.49, and at an average 4 stars rating. With 415 customer reviews and counting, our 2013 BMW 640i Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 BMW 640i is always ready to roll. We’re committed to providing you with everything you need to keep your 640i in top shape, all in one place. Start shopping confidently below for your 2013 BMW 640i!

Best-Selling Air Conditioning Parts for 2013 BMW 640is

Enhance the driving experience in your BMW with 17 quality Air Conditioning Part components, starting at $14.49.

show more show less

from

$213.03

A/C Condenser

from

$144.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$86.99

New Platinum Pro A/C Condenser, 3.0 Liter Engines

Product Features:

3.0 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$676.99

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$648.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance

from

$638.73

A/C Compressor

from

$636.78

A/C Evaporator

from

$231.51

A/C Evaporator

from

$212.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$148.22

A/C Condenser

from

$141.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$126.17

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$85.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$76.99

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$40.96

A/C Pressure Switch

from

$14.49

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

Most Popular 2013 BMW 640i HVAC Electrical Parts

Customize your BMW with 1 HVAC Electrical Parts products like Heater Core Temperature Sensors, all priced under $57.99.

show more show less

from

$57.99

Top Picks for 2013 BMW 640i Heating Parts

Upgrade BMW 640is with top-quality Heating Parts parts, including 4 OEM and aftermarket selections for your 2013 model.

show more show less

from

$2.08

Heater Core O-Ring

from

$276.35

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$265.77

Heater Valve

from

$186.99

Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”.
Engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

In-Demand Engine Cooling Parts for 2013 BMW 640is

Select from 32 premium Engine Cooling Parts parts for your 2013 BMW 640i, with prices ranging from $2.99 to $854.99.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$481.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included

from

$94.99

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$29.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$63.15

Oil Temperature Send

from

$43.45

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$854.99

Rein Automotive OE water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or O-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.

Product Features:

OE high performance motor
Pump uses OE designed bearings by ensuring to extend pumps service life
Includes replacement seals, if applicable
Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty

from

$519.99

VDO now offers an Electric Water Pump with an integrated Control Unit. VDOs Electric Water Pump is the exact OEM part and manufactured to the highest quality and original equipment specifications. It is identical in fit, form, and function and provides the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Our water pump is built in OE ISO TS certified facilities and manufactured to the highest quality standards. VDO also supplies separately the mounting screws associated with installation of our water pump. The Electric Water Pump is mounted with 3 screws. Please refer to OE application and guidelines for screw selection as three variants exist. With VDO you can count on dependable performance and robust design by being original equipment while still maintaining a competitive price.

Product Features:

Precise engine temperature control through variation of coolant volume flow
Use of energy meeting the demands
Operation independent from main cooling circuit and combustion engine operation
Vehicle Specific fit and function
Made in ISO certified facilities OEM Product

from

$497.47

OE-Equivalent
Direct fit for easy installation.
High quality corrosion resistant materials.
OE Style mounting brackets and hose connections.
Mechanically bonded aluminum core.
Integrated transmission oil cooler when applicable.

from

$123.45

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$578.86

OE-Equivalent
Direct fit for easy installation.
High quality corrosion resistant materials.
OE Style mounting brackets and hose connections.
Mechanically bonded aluminum core.
Integrated transmission oil cooler when applicable.

from

$539.99

This engine water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Upgraded replacement – this water pump features a more robust aluminum housing, improving on the crack-prone plastic design that comes stock on certain BMW vehicles
Enhanced electronics – features an updated printed circuit board (PCB), with purposefully designed circuits, that seamlessly integrates with the factory engine control module
Rigorously tested – laboratory and on-vehicle road testing includes validation of dimensions, connector fitment, flow rates and thermal shock durability
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$497.47

Radiator

from

$169.90

OE quality and design
Maintenance-free, durable elements

from

$129.99

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$117.35

Thermostat Assembly

from

$94.99

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$35.97

The Vaico Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$30.49

Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.06

Coolant Level Sensor

from

$22.99

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$18.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Part has a high corrosion resistance for maximum life
Produced with high quality materials to ensure maximum life and a smooth ride
Made by the OE manufacturer

from

$14.99

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Part has a high corrosion resistance for maximum life
Produced with high quality materials to ensure maximum life and a smooth ride
Made by the OE manufacturer

from

$5.81

Water Pump Bolt Set

from

$2.99

Plated for corrosion resistance
Made in ISO certified facilities
OEM Product
26 mm

Most Sold 2013 BMW 640i Blower Motor and Related Products

Explore our best-selling BMW parts for the 2013 640i among 4 OEM and aftermarket options starting from $64.12.

show more show less

from

$205.99

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$164.85

Blower Motor Regulat

from

$159.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$64.12

Blower Motor Cover

Top-Rated Cooling and Climate Controls Brands For Your 2013 BMW 640i

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2013 BMW 640is. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Imperial, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2013 640i start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2013 BMW 640i Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 BMW 640i, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2013 BMW 640i. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Imperial 2013 BMW 640i Cooling and Climate Controls

Imperial auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2013 BMW 640i owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2013 640i, Advance Auto Parts carries a full inventory of 5 Imperial Cooling and Climate Controls. Plus you will be keeping your BMW in peak condition while saving money because prices on these Imperial Cooling and Climate Controls range from $22.99 to $94.99, plus, with more than 116 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$94.99

(38)

Electric Fan – 12" Diameter

“good”

from
$55.99

(33)

Adjustable Thermostatic Fan Control

“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”

from
$22.99

(35)

Adjustable Thermostatic Fan Control

“Advance kicks butt”

FAQs for 2013 BMW 640i Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2013 BMW 640is?

Out of 58 Cooling and Climate Controls that fit 2013 BMW 640is, the following parts are the top sellers:

Adjustable Thermostatic Fan Control (6016936) – $22.99
Electric Fan – 12" Diameter (6016901) – $94.99
Adjustable Thermostatic Fan Control (3670006) – $55.99

What’s the price range for 2013 BMW 640i Cooling and Climate Controls?

Cooling and Climate Control prices for the 2013 BMW 640i start at $2.08 and go up to $854.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2013 BMW 640i?

The average price for Cooling and Climate Controls for the 2013 BMW 640i is $187.44. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other BMW 640i model years?

Yes, we currently carry Cooling and Climate Controls for 6 model years of BMW 640is between 2012 and 2018. Cooling and Climate Controls are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, and 2012.

What are the cheapest Cooling and Climate Controls for my 2013 BMW 640i?

The cheapest 2013 BMW 640i Cooling and Climate Controls we carry in stock are:

Heater Core O-Ring (12550331) – $2.08
Water Pump Metal Screw Kit x3 M8x26 (11646434) – $2.99
Water Pump Bolt Set (11583817) – $5.81
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
A/C Desiccant Bag Kit (11265644) – $14.49

What are the top-rated Cooling and Climate Controls that fit the 2013 BMW 640i?

Out of 415 reviews by customers, our 2013 BMW 640i Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2013 BMW 640i and their top-rated products:

Engine Cooling Parts
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 2013 BMW 640i?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2013 BMW 640i:

Can I get help with 2013 BMW 640i Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.

What is your return policy for BMW 640i Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new BMW 640i Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 BMW 640i Cooling and Climate Controls

Dorman – Blower Motor Resistor (Part No.973-108)

Autopart International Inc – A/C Compressor (Part No.R10003199890API)

Behr – Behr Blower Motor (Part No.R2031402097BEH)

Pierburg – OE Replacement Water Pump (Part No.G3000655257APG)

Carquest Premium – HVAC Heater Core (Part No.910711)

VDO – Water Pump Bolt Set (Part No.G3076687092VDO)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Mahle – Thermostat Assembly (Part No.G4002741096MAH)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2276)

Rein – Cap-Expansion Tank (Part No.CPE0034)

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39445)

Gates – Heater Valve (Part No.R3020656064GAT)

Behr – Behr Radiator (Part No.G1000388236BEH)

Rein – Rein Cooling Hose (Part No.G2021385087RIN)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2666)

Carquest Premium – Blower Motor: With Wheel (Part No.75027)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44032)

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

DENSO – New Compressor With Clutch (Part No.471-1543)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83147)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2118)

Dorman – Pressurized Coolant Reservoir (Part No.603-830)

Rein – Expansion Tank (Part No.EPT0151)

Behr – Expansion Tank (Part No.G1030447746BEH)

Behr – A/C Condenser (Part No.R10302695671BEH)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44032)

KAI – A/C Condenser (Part No.CND4069)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39445)

DENSO – New Compressor With Clutch (Part No.471-1543)

Carquest Premium – New Compressor with Clutch, Nippondenso 7SBU17C (Part No.T198361)

Autopart International Inc – A/C Compressor (Part No.R10003199890API)

Behr – A/C Evaporator (Part No.R1130835485BEH)

Behr – A/C Evaporator (Part No.R1130660886BEH)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714069)

Koyo Cooling – A/C Condenser (Part No.R10302695671KCS)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2666)

INA – Accessory Belt Tensioner Assembly (Part No.G6001468621INA)

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83147)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2118)

ACM – Heater Core O-Ring (Part No.R30011351696ACM)

Behr – Behr Blower Motor (Part No.R2031402097BEH)

Gates – Heater Valve (Part No.R3020656064GAT)

Carquest Premium – HVAC Heater Core (Part No.910711)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Engine Electric Water Pump: New, Aluminum Housing (Part No.T2322)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Motorad – Radiator Cap: 30 PSI (Part No.T-65)

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Rein – Rein Cooling Hose (Part No.G2021385087RIN)

Rein – Electric Water Pump (Part No.WPR0049)

VDO Continental – Electric Water Pump With An Integrated Control Unit (Part No.A2C59514607)

Behr – Behr Radiator (Part No.G1000388236BEH)

Behr – Expansion Tank (Part No.G1030447746BEH)

Behr – Radiator (Part No.G1000655223BEH)

Dorman – Electric Engine Water Pump (Part No.599-962)

Behr – Radiator (Part No.G1000388233BEH)

Mahle – Thermostat Assembly (Part No.G4002741096MAH)

Dorman – Pressurized Coolant Reservoir (Part No.603-830)

Autopart International Inc – Thermostat Assembly (Part No.G40021939284API)

Rein – Expansion Tank (Part No.EPT0151)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Vaico – Expansion Tank Cap (Part No.G1040453566VCO)

Carquest Premium – Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T65)

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Rein – Cap-Expansion Tank (Part No.CPE0035)

Rein – Radiator Mount (Part No.AVM0721)

Rein – Radiator Mount (Part No.AVM0722)