2013 BMW 335i xDrive Steering and Chassis Parts

Essential 2013 BMW 335i xDrive Steering and Chassis Parts

Cardone – Power Steering Pump (Part No.21-108)

Power Steering Pump

from

$242.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Rack and Pinion Assembly (Part No.26-2807)

Rack and Pinion Assembly

from

$596.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Whiteline – Subframe Mount Bushing (Part No.KDT917)

Subframe Mount Bushing

from

$231.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Rein – Power Steering Suction Hose (Part No.PSH0194)

Power Steering Suction Hose

from

$31.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:
  • Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Complete with hardware and seals when necessary for installation to save installation time and additional costs.
  • Restores your vehicle to safe and optimal performance levels.
  • Replacing both pressure and return hoses together ensures optimal performance and safety levels.
See More

aFe POWER – Rear Sway Bar (Part No.440-503003RN)

Rear Sway Bar

from

$407.99
aFe Control is proud to introduce the Rear Sway Bar for the 2007-2013 BMW 335i (E90/92). Designed specifically for the E90/E92 the lightweight tubular sway bar will transform your 335i’s handling and inspire driving confidence. Cornering will be flatter and neutral in any corner. Perfectly balanced, the 29mm rear bar is constructed from lightweight tubular steel and features precision CNC machined, TIG welded bar ends for a perfect fit. The kit includes CNC machined 6061-T6 sway bushing brackets that are a direct fit for the included polyurethane bushings. For years of durability and great looks, the rear sway bar is powder-coated a special 2 stage tangerine orange and are a direct fit on the 2007-2013 BMW 335i (E90/92). aFe Control rear sway bars will have your 335I handling just as good at the track as it will around town. Also available is a matching front sway bar (P/N: 440-503003FN) or a complete set (P/N: 440-503003-N).

Product Features:
  • CNC Machined Parts
  • Adjustable
See More

Dorman – Suspension Control Arm (Part No.521-242)

Suspension Control Arm

from

$297.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone New – Power Steering Reservoir (Part No.3R-503)

Power Steering Reservoir

from

$33.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance
  • Designed to match O.E. fit, function and performance
  • Manufactured from O.E. grade material for strength and durability
  • Resistant to cracking caused by the high temperatures in the engine compartment
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

Engine Coolant Level Sensor

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MOOG – Ball Joint (Part No.K80678)

Ball Joint

from

$59.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Dorman – Lower Steering Shaft (Part No.425-751)

Lower Steering Shaft

from

$514.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Whiteline – Sway Bar Link (Part No.KLC154)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Lemfoerder – Tie Rod Assembly (Part No.M3000466469LEM)

Tie Rod Assembly

from

$155.20
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

MOOG – Tie Rod End (Part No.ES800799)

Tie Rod End

from

$104.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – Pressure Hose Assembly (Part No.40266)

Pressure Hose Assembly

from

$271.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Lemfoerder – Steering Rack Boot Kit (Part No.M1030281016LEM)

Steering Rack Boot Kit

from

$20.03
Steering Rack Boot Kit

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020408186FEB)

Drive Shaft Flex Joint (Guibo)

from

$157.40
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

CRP – Washer (Part No.Y3001860063CRP)

Washer

from

$1.46
Washer

Febi – Sway Bar Bushing (Part No.L1050271922FEB)

Sway Bar Bushing

from

$9.90
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rein – Power Steering Return Line Assembly (Part No.M2016322626RIN)

Power Steering Return Line Assembly

from

$83.58
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Lemfoerder – OE Replacement Guide Rod (Part No.L2015749911LEM)

OE Replacement Guide Rod

from

$85.35
The Lemfoerder Guide Rod is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Bushings resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020241536LEM)

OE Replacement Ball Joint

from

$68.93
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rein – Bushing (Part No.AVB0571)

Bushing

from

$15.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
See More

Lemfoerder – Sway Bar Link (Part No.L1030240365LEM)

Sway Bar Link

from

$43.87
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Stabilizer Bar Link (Part No.K750656)

Stabilizer Bar Link

from

$38.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Lemfoerder – Control Arm (Part No.L2000438275LEM)

Control Arm

from

$67.14
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • Manufactured using high quality OE materials.
  • Includes factory specified hardware.
See More

Lemfoerder – Track Rod (Part No.L2010239080LEM)

Track Rod

from

$78.64
Track Rod

2013 BMW 335i xDrive Steering and Chassis Parts

You count on your 2013 BMW 335i xDrive to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 81 Steering and Chassis Parts ranging in price from $1.46 to $596.99, you’re sure to find everything you need for your 2013 BMW 335i xDrive.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Cardone, Moog, and Carquest Premium. 2013 BMW 335i xDrive Steering and Chassis Parts start as low as $1.46!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 86 extensive product reviews on 2013 BMW 335i xDrive Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Sway Bar Link with 3.7 stars and Ball Joint with 4.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2013 BMW 335i xDrive below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2013 BMW 335i xDrive

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 BMW 335i xDrive running right for years to come. In our inventory you’ll find brands like Cardone, Moog, Carquest Premium, and even more.

Popular Rein Steering and Chassis Parts

You’ll find popular Rein brand products across Power Steering Parts. All are waiting to get your 2013 BMW 335i xDrive back on the road. Some of the top-rated Rein products in these categories are:
Power Steering Reservoir
from $29.99
(1)
Power Steering Reservoir
Power Steering Reservoirs

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2013 BMW 335i xDrive, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters

FAQs for 2013 BMW 335i xDrive Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2013 BMW 335i xDrive?

Out of 81 Steering and Chassis Parts for the 2013 BMW 335i xDrive, the most popular in our inventory are:
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters
Stabilizer Bar Link
from $35.49
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits
Stabilizer Bar Link
from $35.49
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated 2013 BMW 335i xDrive Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2013 BMW 335i xDrive based on customer reviews/ratings are:
Sway Bar Link
from $37.80
(21)
Sway Bar Link
“n/a”
Ball Joint
from $59.99
(2)
Ball Joint
“I used it for my car and it feels great!”