2013 Audi allroad Cooling and Climate Controls
Find Your Specific 2013 Audi allroad Cooling and Climate Controls
Below you will find various in-demand Audi Cooling and Climate Controls, components and accessories for your 2013 allroad. Advance Auto Parts has popular allroad parts like Expansion Tanks, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other allroad model years including
2014,
2015,
2016 and more. Select a category of 2013 Audi allroad Cooling and Climate Controls below and start saving instantly.
Popular 2013 Audi allroad Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2013 Audi allroads
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1888)
from
$613.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Rein – Expansion Tank (Part No.EPT0153)
from
$34.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Carquest Premium – Heater Core (Part No.910685)
from
$74.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Rein – A/C O-Ring (Part No.R1150324905RIN)
from
$1.84
A/C O-Ring
Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-839)
from
$259.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
- Complete package – assembly is designed with the same materials and components as the original part.
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5866)
from
$58.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)
from
$20.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Nissens – Nissens Radiator (Part No.G1000657067NSS)
from
$407.16
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style mounting brackets and hose connections.
- Integrated transmission oil cooler when applicable.
- Compact and lightweight.
KAI – Rad/Condenser Fan Assembly (Part No.AU3115113)
from
$222.99
New Platinum Pro Radiator And Condenser Fan Assembly, 2.0/3.2 Liter V6 Models, Module Not Included
Product Features:
See More
Product Features:
- 2.0/3.2 Liter V6 Models, Module Not Included, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
CRP – Cooling Hose Flange Plug (Part No.G202837841)
from
$0.86
Cooling Hose Flange Plug
Rein – Radiator Mount (Part No.AVM0702)
from
$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Part has a high corrosion resistance for maximum life.
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Made by the OE manufacturer.
Carquest Premium – A/C Evaporator Temperature Sensor (Part No.WTA2021)
from
$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
KAI – A/C Desiccant Element (Part No.ARD010152)
from
$10.99
New Standard Replacement A/C Receiver Drier/Desiccant Element
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
NTK – Engine Coolant Temperature Sensor (Part No.EF0153)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Standard – Reman Nippondenso 6SEU16C Compressor w/ Clutch (Part No.DW97321)
from
$423.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Carquest Premium – A/C Block Expansion Valve (Part No.T39509)
from
$23.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1252)
from
$216.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)
from
$1.81
Heater Pipe O-Ring
Carquest Premium – Engine Electric Water Pump: New, Plastic Housing (Part No.T1645)
from
$142.99
Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Felpro – Engine Coolant Thermostat Gasket (Part No.36131)
from
$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Blower Motor: With Wheel (Part No.75030)
from
$96.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Behr – Blower Motor (Part No.R2031452037BEH)
from
$177.34
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.
Product Features:
See More
Product Features:
- OEM Quality.
- Direct Fit Replacement.
- Highly efficient
- Quiet-running
- Meets or exceeds OE design and performance.
Upgrade your 2013 Audi allroad with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2013 Audi allroad, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your allroad functioning at its best. At Advance Auto Parts, we offer a wide selection of 71 Cooling and Climate Controls for the 2013 Audi allroad, designed to meet your needs without breaking the bank.
From
Expansion Tank
replacements to
Air Conditioning Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2013 Audi allroad at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $0.86 to $615.99, with
an average price of $99.33.
Our 71 Cooling and Climate Controls in stock come from 24 trusted brands, so you’re sure to find the right part for your 2013 Audi allroad without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Audi allroad, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like Permatex, Carquest, Carquest Premium, and more.
Permatex Cooling and Climate Controls
start at just $6.99 and boast an impressive 5 stars average rating from customers.
Carquest and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4 stars rating.
With 912 customer reviews and counting, our 2013 Audi allroad Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Audi allroad is always ready to roll. We’re committed to providing you with everything you need to keep your allroad in top shape, all in one place.
Start shopping confidently below for your 2013 Audi allroad!
Best-Selling Expansion Tanks for 2013 Audi allroads
Enhance the driving experience in your Audi with 1 quality Expansion Tank components, starting at $10.79.
Worldpac – EXPANSION TANK HOSE (Part No.G2030807887AFT)
from
$10.79
EXPANSION TANK HOSE
Most Popular 2013 Audi allroad Air Conditioning Parts
Customize your Audi with 14 Air Conditioning Parts products
like AC Compressor Without Clutch,
Expansion Valve and Orifice Tubes, and
AC Condensers, all
priced under $615.99.
KAI – A/C Desiccant Element (Part No.ARD010152)
from
$10.99
New Standard Replacement A/C Receiver Drier/Desiccant Element
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2268)
from
$113.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.710010)
from
$179.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Carquest Premium – A/C New, with Clutch, with 6SEU14C Compressor (Part No.T98350)
from
$615.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Standard – Reman Nippondenso 6SEU16C Compressor w/ Clutch (Part No.DW97321)
from
$423.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Nissens – A/C Condenser (Part No.R1030856433NSS)
from
$369.15
A/C Condenser
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2267)
from
$112.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Autopart International Inc – A/C Receiver Drier (Part No.R10403311394API)
from
$74.98
A/C Receiver Drier
Santech – A/C Expansion Valve (Part No.R1045660914SII)
from
$61.33
A/C Expansion Valve
Carquest Premium – A/C Evaporator Temperature Sensor (Part No.WTA2021)
from
$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)
from
$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83189)
from
$33.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Santech – A/C Service Valve Co (Part No.R1254946899SII)
from
$9.79
A/C Service Valve Co
Rein – A/C O-Ring (Part No.R1150324905RIN)
from
$1.84
A/C O-Ring
Top Picks for 2013 Audi allroad Engine Cooling Parts
Upgrade Audi allroads with top-quality Engine Cooling Parts parts, including 50 OEM and aftermarket selections for your 2013 model.
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)
from
$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-839)
from
$259.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
- Complete package – assembly is designed with the same materials and components as the original part.
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)
from
$20.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
- The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
- In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
- Robust design and high grade materials meet the stringent demands of today’s service professional
Motorad – Standard Thermostat: With Seal, 203 Degrees (Part No.708-203)
from
$79.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
NTK – Engine Coolant Temperature Sensor (Part No.EF0153)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees (Part No.707-203)
from
$83.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)
from
$20.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Felpro – Engine Water Pump Gasket (Part No.35872)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Rein – Expansion Tank (Part No.EPT0153)
from
$34.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1252)
from
$216.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813188)
from
$246.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Felpro – Engine Coolant Thermostat Housing Seal (Part No.35924)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5866)
from
$58.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Rein – Thermostat Insert 95C (Part No.CTI0010)
from
$29.99
Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Matches original equipment design specifications
- All gaskets or seals necessary for installation are supplied with thermostats
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Thermostat set to 95 degrees Celsius to maintain optimal running temperature
Elth – Water Temp. Sensor (Part No.C6020239910ELT)
from
$24.17
Water Temp. Sensor
KAI – Radiator (Part No.RAD13188)
from
$186.99
New Platinum Pro Radiator, 2.0 Liter Engine With Built-In Transmission Oil Cooler
Product Features:
See More
Product Features:
- 2.0 Liter Engine With Built-In Transmission Oil Cooler, Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)
from
$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Engine Coolant Outlet Gasket (Part No.36130)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Rein – Thermostat Insert 95C (Part No.CTN0046)
from
$46.99
Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- All gaskets or seals necessary for installation are supplied with thermostats.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Thermostat set to 95 degrees Celsius to maintain optimal running temperature.
Felpro – Engine Coolant Thermostat Gasket (Part No.36131)
from
$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)
from
$274.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.
Product Features:
See More
Product Features:
- Engineered for both domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and tough, wear-resistant belt
Nissens – Nissens Radiator (Part No.G1000657067NSS)
from
$407.16
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style mounting brackets and hose connections.
- Integrated transmission oil cooler when applicable.
- Compact and lightweight.
Dorman – Engine Water Pump Assembly (Part No.902-670)
from
$300.99
The gasket on certain Audi and VW OEM engine water pump housings swells when it comes in contact with oil, causing the plastic housing to crack. This Dorman OE FIX housing has been upgraded to aluminum to prevent cracking. In addition, the gasket material has been upgraded to reduce swelling when it comes in contact with oil for a longer service life. This housing is designed to match the fit and function of the original housing on specified applications, and is engineered for reliable performance and durability..
Product Features:
See More
Product Features:
- Improved design – this engine water pump housing has upgraded gasket material to reduce swelling when it comes in contact with oil for a longer service life.
- Direct replacement – this engine water pump housing is designed to match the fit and function of the original housing on specific Audi and VW vehicles
- Restores functionality – maintains the proper engine temperature, protecting the engine from damage caused by overheating
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – Water Pump with Housing (Part No.WPC0016)
from
$289.99
Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.
Product Features:
See More
Product Features:
- Pump is produced with silicon carbide seals providing improved durability and service life
- Pump uses OE designed bearings by ensuring to extend pumps service life
- Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty
- Includes complete assembly for easy installation
Worldpac – WATER PUMP (Part No.G30002973633API)
from
$243.08
WATER PUMP
KAI – Rad/Condenser Fan Assembly (Part No.AU3115113)
from
$222.99
New Platinum Pro Radiator And Condenser Fan Assembly, 2.0/3.2 Liter V6 Models, Module Not Included
Product Features:
See More
Product Features:
- 2.0/3.2 Liter V6 Models, Module Not Included, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Worldpac – AUXILIARY FAN ASSEMB (Part No.G5000948070ACM)
from
$161.08
AUXILIARY FAN ASSEMB
Carquest Premium – Engine Electric Water Pump: New, Plastic Housing (Part No.T1645)
from
$142.99
Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)
from
$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Mahle – MAHLE Thermostat (Part No.G4000461881MAH)
from
$57.99
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.
Product Features:
See More
Product Features:
- OE quality and design
- Maintenance-free, durable elements
- Provides meticulous regulation of coolant circuits Behr’s product expertise transitions to the MAHLE Original brand MAHLE’s recent acquisition of the Behr Thermo-tronik thermal management line will now join the MAHLE Original brand family. The superior quality and coverage known from Behr will continue on, and now will be backed by the MAHLE name. Continuing brand unity is important with any acquisition, and the MAHLE Original brand holds many of the traditional retail market parts, including thermal management. BEHR IS NOW MAHLE ORIGINAL
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Rein – Coolant Pipe (Part No.CHP0774)
from
$34.99
Rein Automotive OE quality coolant pipes fit European vehicles the way the original manufacturer intended. Designed to be a direct replacements for the OE coolant, Rein coolant pipes are identical to the OEM.
Product Features:
See More
Product Features:
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Made to strict engineering quality standards.
- Part is produced using only the highest quality materials.
- Resistant to heat, salt, road debris, oil and other contaminants.
Worldpac – TURBO COOLANT LINE B (Part No.B40741770294RIN)
from
$32.80
TURBO COOLANT LINE B
Autopart International Inc – Thermostat (Part No.G40001992281API)
from
$27.17
Thermostat
Beck/Arnley – Water Pump Gasket (Part No.039-4172)
from
$16.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Metal where applicable
- Quality construction for durability
- Packaged in clear plastic for easy visibility and identification of all components
- Application specific for this vehicle
Rein – Radiator Mount (Part No.AVM0702)
from
$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Part has a high corrosion resistance for maximum life.
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Made by the OE manufacturer.
Reutter – Expansion Tank Cap (Part No.G1040180209REU)
from
$11.24
Expansion Tank Cap
Febi – Radiator Insulator (Part No.G1024818596FEB)
from
$9.65
Radiator Insulator
Victor Reinz – Engine Water Pump Gasket (Part No.71-38928-00)
from
$7.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Autopart International Inc – Expansion Tank Cap (Part No.G10402046473API)
from
$7.19
Expansion Tank Cap
Victor Reinz – Engine Coolant Thermostat Housing Seal (Part No.41-76137-00)
from
$6.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Ajusa – Thermostat O-Ring (Part No.G4030328057AJU)
from
$6.35
Thermostat O-Ring
Victor Reinz – Engine Coolant Pipe O-Ring (Part No.41-10479-00)
from
$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Rein – Radiator Mount (Part No.AVM0716)
from
$4.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Part has a high corrosion resistance for maximum life
- Produced with high quality materials to ensure maximum life and a smooth ride
- Made by the OE manufacturer
Febi – C Clip Retainer (Part No.G2050309483FEB)
from
$3.88
C Clip Retainer
Febi – Radiator Insulator (Part No.G1024818598FEB)
from
$2.89
Radiator Insulator
In-Demand Blower Motor and Related Products for 2013 Audi allroads
Select from 4 premium Blower Motor and Related Products parts for your 2013 Audi allroad, with prices ranging from $96.99 to $613.99.
Carquest Premium – Blower Motor: With Wheel (Part No.75030)
from
$96.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Behr – Blower Motor (Part No.R2031452037BEH)
from
$177.34
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.
Product Features:
See More
Product Features:
- OEM Quality.
- Direct Fit Replacement.
- Highly efficient
- Quiet-running
- Meets or exceeds OE design and performance.
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1888)
from
$613.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Worldpac – Blower Motor Regulat (Part No.R20413554640BEH)
from
$116.62
Blower Motor Regulat
Most Sold 2013 Audi allroad Heating Parts
Explore our best-selling Audi parts for the 2013 allroad among 2 OEM and aftermarket options starting from $1.81.
Carquest Premium – Heater Core (Part No.910685)
from
$74.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)
from
$1.81
Heater Pipe O-Ring
Top-Rated Cooling and Climate Controls Brands For Your 2013 Audi allroad
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2013 Audi allroads. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2013 allroad start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 2013 Audi allroad Cooling and Climate Controls
When it comes to maintaining or upgrading your 2013 Audi allroad, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2013 Audi allroad. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$26.99
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
“it worked great,thank you marv and your crew.”
Popular Carquest 2013 Audi allroad Cooling and Climate Controls
Carquest auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2013 Audi allroad owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 2013 allroad, Advance Auto Parts carries a full inventory of 2 Carquest Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Cooling and Climate Controls range from $20.99 to $423.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
from
$20.99
$20.99
(3)
Engine Coolant Temperature Sensor
“advance auto is my place for auto parts, has been for years, it’s the first and usually the only place I use; when, purchasing parts. I’m a scrutinizi”
FAQs for 2013 Audi allroad Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2013 Audi allroads?
Out of 71 Cooling and Climate Controls that fit 2013 Audi allroads, the following parts are the top sellers:
- Engine Coolant Temperature Sensor (10017275) – $20.99
- Engine Coolant Reservoir Cap (5020080) – $11.99
- Engine Coolant Temperature Sensor (12223037) – $29.99
What’s the price range for 2013 Audi allroad Cooling and Climate Controls?
Cooling and Climate Control prices for the 2013 Audi allroad start at $0.86 and go up to $615.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2013 Audi allroad?
The average price for Cooling and Climate Controls for the 2013 Audi allroad is $99.33. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Audi allroad model years?
What are the cheapest Cooling and Climate Controls for my 2013 Audi allroad?
The cheapest 2013 Audi allroad Cooling and Climate Controls we carry in stock are:
- Cooling Hose Flange Plug (10792211) – $0.86
- Heater Pipe O-Ring (11025643) – $1.81
- A/C O-Ring (10813249) – $1.84
- RADIATOR HOSE O-RING (50238424) – $1.89
- Engine Coolant Thermostat Housing Seal (10081713) – $2.79
What are the top-rated Cooling and Climate Controls that fit the 2013 Audi allroad?
Out of 912 reviews by customers, our 2013 Audi allroad Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2013 Audi allroad and their top-rated products:
- Blower Motor and Related Products
- Blower Motor: With Wheel (11524759) – $96.99
- Engine Cooling Parts
- Blower Motor: With Wheel (11524759) – $96.99
What types of Cooling and Climate Controls do you sell for my 2013 Audi allroad?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2013 Audi allroad:
Can I get help with 2013 Audi allroad Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.
What is your return policy for Audi allroad Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Audi allroad Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
