2013 Audi A3 Quattro Cooling and Climate Controls

Name: Engine Coolant Temperature Sensor
Brand: Carquest
SKU: WT7257
Price: 20.99 USD
Rating: 4.5 (3 reviews)

Below you will find various in-demand Audi Cooling and Climate Controls, components and accessories for your 2013 A3 Quattro. Advance Auto Parts has popular A3 Quattro parts like Blower Motor and Related Products, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other A3 Quattro model years including 2012, 2015, 2016, 2017, 2018, 2019, 2020, 2022, 2023 and more. Select a category of 2013 Audi A3 Quattro Cooling and Climate Controls below and start saving instantly.

Popular 2013 Audi A3 Quattro Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

AC Compressor Without Clutch

Thermostats

Climate Control Modules

Radiator Fan Motors

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

Heater Cores

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

AC Receiver Drier Desiccant Elements

Thermostat Seals

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Coolant Outlet Flanges

HVAC Blower Motor Regulators

AC Refrigerant Pressure Sensors

AC Temperature Control Switches

Radiator Mount Brackets

Radiator Cap Tester Adapters

Heater Core Seals

Engine Coolant Pipe Seals

Engine Coolant Thermostat Housing Cover Seals

Engine Water Pump Drive Kit

Engine Coolant Pipe C-Clip

HVAC Heater Pipe O-Rings

Essential Cooling and Climate Controls for 2013 Audi A3 Quattros

from

$20.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today’s service professional

from

$274.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$60.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$117.76

Blower Motor Regulat

from

$39.99

New Standard Replacement A/C Expansion Valve, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$122.73

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$15.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$171.90

Blower Motor Regulat

from

$44.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$18.65

ACM is a supplier of Original Equipment quality climate control products. Feed & Return Lines

from

$2.29

Thermostat O-Ring

from

$12.60

Radiator Mount

from

$107.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$83.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$23.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$7.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$75.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$341.07

Auxiliary Water Pump

from

$499.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$248.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$3.88

C Clip Retainer

from

$24.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life..

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Rentable y confiable: ofrece la calidad original del fabricante a un costo menor que el reemplazo en el distribuidor

from

$64.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Manufactured with high quality materials
Designed for underhood conditions
Quality constructed for durability
Application specific for this vehicle

from

$271.26

Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$125.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$62.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$86.20

The Sebro OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

from

$62.99

For more than a century, Delphi has been making the parts cars are born with – often developing new technologies in the process. Delphi is proud of its OE heritage, and over the years they’ve used that experience to expand into a global aftermarket supplier.

Product Features:

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Upgrade your 2013 Audi A3 Quattro with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 Audi A3 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your A3 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Cooling and Climate Controls for the 2013 Audi A3 Quattro, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2013 Audi A3 Quattro at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.86 to $681.90, with an average price of $126.70. Our 89 Cooling and Climate Controls in stock come from 29 trusted brands, so you’re sure to find the right part for your 2013 Audi A3 Quattro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Audi A3 Quattro, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Dorman, Carquest Premium, Carquest, and more. Dorman Cooling and Climate Controls start at just $20.99 and boast an impressive 4 stars average rating from customers. Carquest Premium and Carquest also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4 stars rating. With 18 customer reviews and counting, our 2013 Audi A3 Quattro Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Audi A3 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A3 Quattro in top shape, all in one place. Start shopping confidently below for your 2013 Audi A3 Quattro!

Best-Selling Blower Motor and Related Products for 2013 Audi A3 Quattros

Enhance the driving experience in your Audi with 4 quality Blower Motor and Related Product components, starting at $117.76.

show more show less

from

$125.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$271.26

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$492.11

BLOWER MOTOR

from

$117.76

Blower Motor Regulat

Most Popular 2013 Audi A3 Quattro Air Conditioning Parts

Customize your Audi with 21 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $681.90.

show more show less

from

$288.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$34.49

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$62.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$23.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$93.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$39.99

New Standard Replacement A/C Expansion Valve, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$107.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$681.90

Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
Equipped with a new clutch assembly
OEM supplier to many European vehicle manufacturers

from

$672.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$568.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$370.07

A/C Compressor

from

$211.03

Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:

OEM Quality Direct fit Application
Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.

from

$183.15

A/C Hose

from

$153.46

Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.

Product Features:

Japanese Engineered, OE Equivalent Quality
Meet or exceed OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Compatible with R12 and R134a refrigerant.
Applicable gaskets and O-rings supplied with each part.

from

$80.62

Drier Desiccant Elem

from

$63.68

The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$62.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

from

$59.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$57.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$34.81

A/C Receiver Drier

from

$31.36

A/C Temp. Switch

Top Picks for 2013 Audi A3 Quattro Engine Cooling Parts

Upgrade Audi A3 Quattros with top-quality Engine Cooling Parts parts, including 57 OEM and aftermarket selections for your 2013 model.

show more show less

from

$11.99

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$416.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$52.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$20.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today’s service professional

from

$79.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$29.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$185.99

Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$83.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$20.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$201.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$216.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$248.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.53

Radiator Mount

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$58.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$29.99

Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.

Product Features:

Matches original equipment design specifications
All gaskets or seals necessary for installation are supplied with thermostats
Manufactured to strict engineering standards/specifications in materials and tolerances
Thermostat set to 95 degrees Celsius to maintain optimal running temperature

from

$24.17

Water Temp. Sensor

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$12.60

Radiator Mount

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$46.99

Matches original equipment design specifications.
All gaskets or seals necessary for installation are supplied with thermostats.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Thermostat set to 95 degrees Celsius to maintain optimal running temperature.

from

$5.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$274.99

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$434.38

AUXILIARY FAN ASSEMB

from

$337.65

AUXILIARY FAN ASSEMB

from

$316.47

The demands on engine cooling systems are constantly increasing. Today more than ever, new solutions aim to have a positive impact on fuel consumption, emissions, driving comfort and driving safety via heat transfer. Quality products from Behr Hella Service are distinguished by their suitability, reliability and long service life.

Product Features:

OE quality
Quiet operation and dependable performance
Dual Bearing design technology
Vibration free operation
Precision assembled and balanced with all new components
Tested to OEM specifications

from

$300.99

The gasket on certain Audi and VW OEM engine water pump housings swells when it comes in contact with oil, causing the plastic housing to crack. This Dorman OE FIX housing has been upgraded to aluminum to prevent cracking. In addition, the gasket material has been upgraded to reduce swelling when it comes in contact with oil for a longer service life. This housing is designed to match the fit and function of the original housing on specified applications, and is engineered for reliable performance and durability..

Product Features:

Improved design – this engine water pump housing has upgraded gasket material to reduce swelling when it comes in contact with oil for a longer service life.
Direct replacement – this engine water pump housing is designed to match the fit and function of the original housing on specific Audi and VW vehicles
Restores functionality – maintains the proper engine temperature, protecting the engine from damage caused by overheating
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$289.99

Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.

Product Features:

Pump is produced with silicon carbide seals providing improved durability and service life
Pump uses OE designed bearings by ensuring to extend pumps service life
Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty
Includes complete assembly for easy installation

from

$285.23

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Reduction in noise
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
Water circulation pump can deliver as much as 800 liters per hour
Coolant pump can deliver more than 9,000 liters per hour

from

$278.08

Auxiliary Fan Assemb

from

$243.08

WATER PUMP

from

$232.15

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$210.14

Plastic Tank / Aluminum Core Radiator CSF prides itself on using the most advanced technologies, machines, and experienced personnel to design, develop, and manufacture the world’s best cooling systems. With three privately owned, ISO certified manufacturing facilities that supply to local OE brands, CSF houses the industry’s best manufacturing equipment. CSF’s world class facilities manufacture the highest quality cooling system products available. Thanks to our cutting edge capabilities, we are able to produce the strongest and most complicated components with ease. CSF leads the industry in multi-fit models, which provides customers with additional application coverage, while reducing inventory. All CSF radiators undergo a rigorous testing process in our state-of-the-art testing lab. Our procedures and requirements set the bar for cooling system reliability and performance:

Product Features:

Individually leak tested
Vibration cycle tested
Thermal cycle tested
Wind tunnel tested for optimal radiator core cooling efficiency
Burst pressure and impulse cycle tested for strength
Salt spray tested for corrosion protection
10 foot box “drop test” to ensure packaging protection
30 point fitment inspection on critical dimensions to ensure OE fitment with no modifications necessary

from

$200.49

A/C Condenser Fan As

from

$189.99

Rein Automotive OE quality auxiliary water pumps are fabricated from original casting specifications to ensure proper fit for easy installation, proper water flow and maximum cooling. Auxiliary water pump use high-quality plastic or metal construction to ensure durability and long service life. Our auxiliary water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

High-quality plastic or metal construction
Flow-rates matched to OE flow-rates
Includes the vibration isolators, mounting brackets and hardware where applicable for easy installation

from

$75.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$69.99

COOLANT PIPE

from

$64.99

Matches OE form, fit and function
Manufactured with high quality materials
Designed for underhood conditions
Quality constructed for durability
Application specific for this vehicle

from

$57.99

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements
Provides meticulous regulation of coolant circuits Behr’s product expertise transitions to the MAHLE Original brand MAHLE’s recent acquisition of the Behr Thermo-tronik thermal management line will now join the MAHLE Original brand family. The superior quality and coverage known from Behr will continue on, and now will be backed by the MAHLE name. Continuing brand unity is important with any acquisition, and the MAHLE Original brand holds many of the traditional retail market parts, including thermal management. BEHR IS NOW MAHLE ORIGINAL

from

$54.25

COOLANT OUTLET FLANG

from

$51.99

Rein Automotive OE quality coolant pipes fit European vehicles the way the original manufacturer intended. Designed to be a direct replacements for the OE coolant, Rein coolant pipes are identical to the OEM.

Product Features:

Designed as direct-fit replacements to ensure trouble-free proper installation.
Made to strict engineering quality standards.
Part is produced using only the highest quality materials.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$29.99

Designed as direct-fit replacements to ensure trouble-free proper installation.
Made to strict engineering quality standards.
Part is produced using only the highest quality materials.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$27.17

Thermostat

from

$24.99

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Rentable y confiable: ofrece la calidad original del fabricante a un costo menor que el reemplazo en el distribuidor

from

$16.49

Matches OE form, fit and function
Metal where applicable
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$11.24

Expansion Tank Cap

from

$7.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

In-Demand Heating Parts for 2013 Audi A3 Quattros

Select from 3 premium Heating Parts parts for your 2013 Audi A3 Quattro, with prices ranging from $1.81 to $144.99.

show more show less

from

$144.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$18.65

ACM is a supplier of Original Equipment quality climate control products. Feed & Return Lines

from

$1.81

Heater Pipe O-Ring

Most Sold 2013 Audi A3 Quattro Blend Doors

Explore our best-selling Audi parts for the 2013 A3 Quattro among 1 OEM and aftermarket options starting from $33.71.

show more show less

from

$33.71

A/C Servo

Top-Rated Cooling and Climate Controls Brands For Your 2013 Audi A3 Quattro

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2013 Audi A3 Quattros. Below you’ll find some of our best rated Cooling and Climate Controls from Dorman, Carquest Premium, and Carquest, and more. Cooling and Climate Controls from these brands that fit a 2013 A3 Quattro start at just $11.99 and are rated as high as 4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2013 Audi A3 Quattro Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 Audi A3 Quattro, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Cooling and Climate Controls, specifically designed for the 2013 Audi A3 Quattro. With over 9 Dorman brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.99, with an average price of just $135.40. Plus, with over 8 customer reviews and an average rating of 4 stars, you can trust that our Dorman Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$20.99

This product is not rated

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

“”

from
$58.99

This product is not rated

Coolant Housing/Water Outlet: With Housing

“”

from
$248.99

This product is not rated

Auxiliary Coolant Pump

“”

Popular Carquest Premium 2013 Audi A3 Quattro Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2013 Audi A3 Quattro owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2013 A3 Quattro, Advance Auto Parts carries a full inventory of 17 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $11.99 to $672.99, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$185.99

This product is not rated

Engine Electric Water Pump: New, Plastic Housing

“”

from
$23.99

This product is not rated

A/C Filter Drier with Pad Mount

“”

from
$62.99

This product is not rated

ABS sensor

“”

FAQs for 2013 Audi A3 Quattro Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2013 Audi A3 Quattros?

Out of 89 Cooling and Climate Controls that fit 2013 Audi A3 Quattros, the following parts are the top sellers:

Engine Coolant Temperature Sensor (10017275) – $20.99
Engine Coolant Reservoir Cap (5020080) – $11.99
A/C Block Type O-Ring Expansion Valve (20898539) – $34.49

What’s the price range for 2013 Audi A3 Quattro Cooling and Climate Controls?

Cooling and Climate Control prices for the 2013 Audi A3 Quattro start at $0.86 and go up to $681.90 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2013 Audi A3 Quattro?

The average price for Cooling and Climate Controls for the 2013 Audi A3 Quattro is $126.70. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Audi A3 Quattro model years?

Yes, we currently carry Cooling and Climate Controls for 16 model years of Audi A3 Quattros between 2006 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 2012.

What are the cheapest Cooling and Climate Controls for my 2013 Audi A3 Quattro?

The cheapest 2013 Audi A3 Quattro Cooling and Climate Controls we carry in stock are:

Cooling Hose Flange Plug (10792211) – $0.86
Splash Shield Hardwa (12487152) – $1.67
Heater Pipe O-Ring (11025643) – $1.81
RADIATOR HOSE O-RING (50238424) – $1.89
Engine Coolant Thermostat Housing Seal (10081713) – $2.79

What are the top-rated Cooling and Climate Controls that fit the 2013 Audi A3 Quattro?

Out of 18 reviews by customers, our 2013 Audi A3 Quattro Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2013 Audi A3 Quattro and their top-rated products:

Engine Cooling Parts
- Engine Coolant Reservoir Cap (5020080) – $11.99
- Radiator Fan Assembly: Dual, Cost Effective & Reliable (10414946) – $416.99
- Engine Coolant Temperature Sensor (10017275) – $20.99

What types of Cooling and Climate Controls do you sell for my 2013 Audi A3 Quattro?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2013 Audi A3 Quattro:

Can I get help with 2013 Audi A3 Quattro Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.

What is your return policy for Audi A3 Quattro Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Audi A3 Quattro Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Audi A3 Quattro Cooling and Climate Controls

Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)

Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)

Dorman – HVAC Air Door Actuator (Part No.604-339)

Vemo – Blower Motor Regulat (Part No.R2041811434VMO)

KAI – A/C Expansion Valve, L4 Engine (Part No.ACX011345)

Geba – Water Pump (Part No.G3000125101GEB)

Rein – Cap-Expansion Tank (Part No.CPE0039)

ACM – Blower Motor Regulat (Part No.R2041811434ACM)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83378)

ACM – Heater Core O-Ring Kit (Part No.R3002384000ACM)

CRP – Thermostat O-Ring (Part No.G403032487)

Rein – Radiator Mount (Part No.G1020411383RIN)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44001)

Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees (Part No.707-203)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83252)

Victor Reinz – Engine Water Pump Gasket (Part No.71-38928-00)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Geba – Auxiliary Water Pump (Part No.G3050665844GEB)

Carquest Premium – A/C New, with Clutch, with DCS17E Compressor (Part No.T68646)

Carquest Standard – Air Conditioning Remanufactured Compressor and Clutch (Part No.DW67646)

Febi – C Clip Retainer (Part No.G2050309483FEB)

Dorman – Engine Coolant Water Outlet (Part No.902-034)

Beck/Arnley – Water Flange (Part No.147-0039)

Behr – Blower Motor (Part No.R20311229589BEH)

Carquest Premium – Blower Motor: With Wheel (Part No.75034)

Carquest Premium – ABS sensor (Part No.ARC1188)

Sebro – ABS Speed Sensor (Part No.N6030461796SEB)

Delphi – ABS Wheel Speed Sensor (Part No.SS20035)

Carquest Premium – Blower Motor: With Wheel (Part No.75034)

Behr – Blower Motor (Part No.R20311229589BEH)

Worldpac – BLOWER MOTOR (Part No.R20314192496ACM)

Vemo – Blower Motor Regulat (Part No.R2041811434VMO)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6054)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39260)

Carquest Premium – ABS sensor (Part No.ARC1188)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83252)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1217)

KAI – A/C Expansion Valve, L4 Engine (Part No.ACX011345)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44001)

Behr – A/C Compressor w/ Clutch, New (Part No.R1000339446BEH)

Carquest Premium – A/C New, with Clutch, with 6SEU14C Compressor (Part No.T158322)

Carquest Premium – A/C New, with Clutch, with PXE16 Compressor (Part No.T168646)

Autopart International Inc – A/C Compressor (Part No.R10003200157API)

Nissens – Nissens A/C Condenser (Part No.R1030327861NSS)

Vaico – A/C Hose (Part No.R1020515117VCO)

Koyo Cooling – Koyo Cooling A/C Condenser (Part No.R1030327861KCS)

Nissens – Drier Desiccant Elem (Part No.R1043399215NSS)

ACM – ACM A/C Expansion Valve (Part No.R1045180300ACM)

Delphi – ABS Wheel Speed Sensor (Part No.SS20035)

Dorman – Air Conditioning Pressure Sensor (Part No.904-613)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2001)

Autopart International Inc – A/C Receiver Drier (Part No.R10403311418API)

Vemo – A/C Temp. Switch (Part No.R1055436052VMO)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-805)

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-253)

Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)

Motorad – Standard Thermostat: With Seal, 203 Degrees (Part No.708-203)

NTK – Engine Coolant Temperature Sensor (Part No.EF0153)

Carquest Premium – Engine Electric Water Pump: New, Plastic Housing (Part No.T1215)

Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees (Part No.707-203)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)

Carquest Premium – Radiator (Part No.813237)

Felpro – Engine Water Pump Gasket (Part No.35872)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1252)

Dorman – Auxiliary Coolant Pump (Part No.902-069)

Burgaflex – Radiator Mount (Part No.G1020285444BUR)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35924)

Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5866)

Rein – Thermostat Insert 95C (Part No.CTI0010)

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Rein – Radiator Mount (Part No.G1020411383RIN)

Felpro – Engine Coolant Outlet Gasket (Part No.36130)

Rein – Thermostat Insert 95C (Part No.CTN0046)

Felpro – Engine Coolant Thermostat Gasket (Part No.36131)

Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)

Worldpac – AUXILIARY FAN ASSEMB (Part No.G5000478210MAH)

Worldpac – AUXILIARY FAN ASSEMB (Part No.G5000341857MAH)