2013 Acura ZDX Suspension Parts

Essential Suspension Parts for 2013 Acura ZDXes

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Extended Protection Automatic Transmission Fluid, 1 Quart

from

$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:
  • The ultimate protection for your automatic transmission
  • 45% stronger against breakdown
  • Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
  • Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
See More

KYB – Excel-G Strut Assembly (Part No.L3000303718KYB)

Excel-G Strut Assembly

from

$197.79
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:
  • Restores OE performance
  • One way anti-foaming valve reduces foaming and performance fade
  • Three stage dual valving
  • Teflon coated piston valve
  • Seamless inner cylinder and eye ring, no leaks
  • Bonded bushings and sleeves
  • Hard chromed piston rod
See More

KYB – Excel-G Strut Assembly (Part No.L3000303717KYB)

Excel-G Strut Assembly

from

$189.07
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:
  • Restores OE performance
  • One way anti-foaming valve reduces foaming and performance fade
  • Three stage dual valving
  • Teflon coated piston valve
  • Seamless inner cylinder and eye ring, no leaks
  • Bonded bushings and sleeves
  • Hard chromed piston rod
See More

Carquest Premium – Suspension Yaw Sensor (Part No.YWC1062)

Suspension Yaw Sensor

from

$561.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Suspension Lateral Link (Part No.526-967)

Suspension Lateral Link

from

$45.99
Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-701)

Suspension Control Arm Bushing

from

$94.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.523-063)

Suspension Control Arm Bushing

from

$181.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Autopart International Inc – Control Arm (Part No.L20003191953API)

Control Arm

from

$242.43
Control Arm

Dorman – Suspension Control Arm (Part No.527-043)

Suspension Control Arm

from

$116.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.907983)

Strut-Mate Strut Mounting Kit

from

$64.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37309)

OESpectrum Light Truck Shock Absorber

from

$135.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Suncore – Shock Absorber (Part No.12S259110)

Shock Absorber

from

$34.99
Shock Absorber

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818891)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$209.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818892)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$209.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Suncore – COMPL STRUT ASSEM (Part No.55S11713)

COMPL STRUT ASSEM

from

$159.99
COMPL STRUT ASSEM

Monroe – Strut-Mate Strut Boot Kit (Part No.63630)

Strut-Mate Strut Boot Kit

from

$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

KYB – Jounce Bumper and Bellows (Part No.SB102)

Jounce Bumper and Bellows

from

$32.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Autopart International Inc – Trailing Arm (Part No.L20052793092API)

Trailing Arm

from

$87.47
Trailing Arm

Dorman – Suspension Trailing Arm (Part No.526-055)

Suspension Trailing Arm

from

$88.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:
  • Direct replacement – this suspension trailing arm fits and functions like the original equipment part
  • Quality construction – manufactured from same materials as original equipment for safety and reliability
  • Durable – protective finish for long-lasting corrosion resistance
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Dorman – Suspension Trailing Arm (Part No.526-056)

Suspension Trailing Arm

from

$87.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:
  • Direct replacement – this suspension trailing arm fits and functions like the original equipment part
  • Quality construction – manufactured from same materials as original equipment for safety and reliability
  • Durable – protective finish for long-lasting corrosion resistance
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Suncore – Shock Kit (Part No.2-12S259110-001)

Shock Kit

from

$69.99
Shock Kit

International Suspension Group – Strut Mount (Part No.L3030387010ISG)

Strut Mount

from

$67.02
Strut Mount

First Equipment Quality – Strut Mount (Part No.L3030387010FEQ)

Strut Mount

from

$37.03
The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rare Parts – STRUT MOUNT (Part No.RP53618)

STRUT MOUNT

from

$111.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore vehicle ride.
  • Reduces tire wear
See More

Upgrade your 2013 Acura ZDX with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2013 Acura ZDX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Suspension Parts are key to keeping your ZDX functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Suspension Parts for the 2013 Acura ZDX, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2013 Acura ZDX at great prices. Our Suspension Parts inventory for this model ranges from just $6.29 to $561.99, with an average price of $135.43. Our 38 Suspension Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 2013 Acura ZDX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Acura ZDX, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline Monroe, and more. Valvoline Suspension Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. With 452 customer reviews and counting, our 2013 Acura ZDX Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Acura ZDX is always ready to roll. We’re committed to providing you with everything you need to keep your ZDX in top shape, all in one place. Start shopping confidently below for your 2013 Acura ZDX!

Best-Selling Coil and Leaf Springs for 2013 Acura ZDXes

Enhance the driving experience in your Acura with 7 quality Coil and Leaf Spring components, starting at $159.99.

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172434)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$348.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818891)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$209.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818892)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$209.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Suncore – COMPL STRUT ASSEM (Part No.55S11713)

COMPL STRUT ASSEM

from

$159.99
COMPL STRUT ASSEM

Suncore – COMPL STRUT ASSEM (Part No.55S11714)

COMPL STRUT ASSEM

from

$159.99
COMPL STRUT ASSEM

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818892)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$204.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818891)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$204.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Most Popular 2013 Acura ZDX Air Suspension and Kits

Customize your Acura with 6 Air Suspension and Kits products like Suspension Self-Leveling Unit Fluids, Suspension Strut Mounting Kits, and Shock Absorber Kits, all priced under $561.99.

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.907983)

Strut-Mate Strut Mounting Kit

from

$64.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Carquest Premium – Suspension Yaw Sensor (Part No.YWC1062)

Suspension Yaw Sensor

from

$561.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Suncore – Shock Kit (Part No.2-12S259110-001)

Shock Kit

from

$69.99
Shock Kit

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Extended Protection Automatic Transmission Fluid, 1 Quart

from

$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:
  • The ultimate protection for your automatic transmission
  • 45% stronger against breakdown
  • Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
  • Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
See More

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Max Performance Synthetic Power Steering Fluid

from

$6.29
Max Performance Synthetic Power Steering Fluid

Top Picks for 2013 Acura ZDX Trailing Arms

Upgrade Acura ZDXes with top-quality Trailing Arms parts, including 3 OEM and aftermarket selections for your 2013 model.

Dorman – Suspension Trailing Arm (Part No.526-055)

Suspension Trailing Arm

from

$88.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:
  • Direct replacement – this suspension trailing arm fits and functions like the original equipment part
  • Quality construction – manufactured from same materials as original equipment for safety and reliability
  • Durable – protective finish for long-lasting corrosion resistance
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Dorman – Suspension Trailing Arm (Part No.526-056)

Suspension Trailing Arm

from

$87.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:
  • Direct replacement – this suspension trailing arm fits and functions like the original equipment part
  • Quality construction – manufactured from same materials as original equipment for safety and reliability
  • Durable – protective finish for long-lasting corrosion resistance
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Autopart International Inc – Trailing Arm (Part No.L20052793092API)

Trailing Arm

from

$87.47
Trailing Arm

In-Demand Shocks and Struts for 2013 Acura ZDXes

Select from 15 premium Shocks and Struts parts for your 2013 Acura ZDX, with prices ranging from $32.49 to $319.99.

Monroe – Strut-Mate Strut Boot Kit (Part No.63630)

Strut-Mate Strut Boot Kit

from

$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37309)

OESpectrum Light Truck Shock Absorber

from

$135.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

KYB – Jounce Bumper and Bellows (Part No.SB102)

Jounce Bumper and Bellows

from

$32.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

KYB – Gas Shock (Part No.349025)

Gas Shock

from

$123.99
Product Features:
  • #1 recommended Original Equipment replacement choice for Asian SUVs and Crossovers
  • Specifically calibrated to help restore the original handling and control characteristics of the Acura MDX
  • Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
  • Triple chrome plated piston rod and multi-lip oil seals that reduce wear
  • Solid seamless mounting eye rings and bolt bushings to eliminate rattles
  • Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
See More

Monroe – OESpectrum Strut (Part No.72434)

OESpectrum Strut

from

$124.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Monroe – OESpectrum Strut (Part No.72433)

OESpectrum Strut

from

$124.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Suncore – Quick Strut Kit (Part No.2-55S11713-001)

Quick Strut Kit

from

$319.99
Quick Strut Kit

Suncore – Shock Absorber (Part No.12S259110)

Shock Absorber

from

$34.99
Shock Absorber

KYB – Excel-G Strut Assembly (Part No.L3000303718KYB)

Excel-G Strut Assembly

from

$197.79
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:
  • Restores OE performance
  • One way anti-foaming valve reduces foaming and performance fade
  • Three stage dual valving
  • Teflon coated piston valve
  • Seamless inner cylinder and eye ring, no leaks
  • Bonded bushings and sleeves
  • Hard chromed piston rod
See More

KYB – Excel-G Strut Assembly (Part No.L3000303717KYB)

Excel-G Strut Assembly

from

$189.07
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:
  • Restores OE performance
  • One way anti-foaming valve reduces foaming and performance fade
  • Three stage dual valving
  • Teflon coated piston valve
  • Seamless inner cylinder and eye ring, no leaks
  • Bonded bushings and sleeves
  • Hard chromed piston rod
See More

Rare Parts – STRUT MOUNT (Part No.RP53618)

STRUT MOUNT

from

$111.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore vehicle ride.
  • Reduces tire wear
See More

Autopart International Inc – Strut Mount (Part No.L30303157683API)

Strut Mount

from

$67.14
Strut Mount

International Suspension Group – Strut Mount (Part No.L3030387010ISG)

Strut Mount

from

$67.02
Strut Mount

DEA – Strut Mount (Part No.L3030387010DEA)

Strut Mount

from

$60.65
Strut Mount

First Equipment Quality – Strut Mount (Part No.L3030387010FEQ)

Strut Mount

from

$37.03
The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Most Sold 2013 Acura ZDX Control Arms

Explore our best-selling Acura parts for the 2013 ZDX among 7 OEM and aftermarket options starting from $45.99.

Dorman – Suspension Control Arm Bushing (Part No.523-063)

Suspension Control Arm Bushing

from

$181.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Autopart International Inc – Control Arm (Part No.L20003191953API)

Control Arm

from

$242.43
Control Arm

Autopart International Inc – Control Arm (Part No.L20003191969API)

Control Arm

from

$233.80
Control Arm

Dorman – Suspension Control Arm (Part No.527-043)

Suspension Control Arm

from

$116.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-701)

Suspension Control Arm Bushing

from

$94.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Control Arm (Part No.RK642895)

Control Arm

from

$46.49
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Dorman – Suspension Lateral Link (Part No.526-967)

Suspension Lateral Link

from

$45.99
Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Top-Rated Suspension Parts Brands For Your 2013 Acura ZDX

Shop for the best-rated brands offering Suspension Parts and other products for your 2013 Acura ZDXes. Below you’ll find some of our best rated Suspension Parts from Valvoline and Monroe, and more. Suspension Parts from these brands that fit a 2013 ZDX start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2013 Acura ZDX Suspension Parts

When it comes to maintaining or upgrading your 2013 Acura ZDX, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2013 Acura ZDX. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $25.74. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Extended Protection Automatic Transmission Fluid, 1 Quart
from
$14.99
This product is not rated

Extended Protection Automatic Transmission Fluid, 1 Quart

“”

Popular Monroe 2013 Acura ZDX Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2013 Acura ZDX owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2013 ZDX, Advance Auto Parts carries a full inventory of 6 Monroe Suspension Parts. Plus you will be keeping your Acura in peak condition while saving money because prices on these Monroe Suspension Parts range from $37.49 to $348.99, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

Strut-Mate Strut Mounting Kit
from
$64.99
This product is not rated

Strut-Mate Strut Mounting Kit

“”

OESpectrum Strut
from
$124.99
This product is not rated

OESpectrum Strut

“”

OESpectrum Light Truck Shock Absorber
from
$135.99
This product is not rated

OESpectrum Light Truck Shock Absorber

“”

FAQs for 2013 Acura ZDX Suspension Parts

Which Suspension Parts are best-sellers for 2013 Acura ZDXes?

Out of 38 Suspension Parts that fit 2013 Acura ZDXes, the following parts are the top sellers:

What’s the price range for 2013 Acura ZDX Suspension Parts?

Suspension Part prices for the 2013 Acura ZDX start at $6.29 and go up to $561.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2013 Acura ZDX?

The average price for Suspension Parts for the 2013 Acura ZDX is $135.43. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Acura ZDX model years?

Yes, we currently carry Suspension Parts for 3 model years of Acura ZDXes between 2010 and 2012. Suspension Parts are bought most frequently for the following model years: 2012, 2011, and 2010.

What are the cheapest Suspension Parts for my 2013 Acura ZDX?

The cheapest 2013 Acura ZDX Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 2013 Acura ZDX?

Out of 452 reviews by customers, our 2013 Acura ZDX Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2013 Acura ZDX and their top-rated products:

What types of Suspension Parts do you sell for my 2013 Acura ZDX?

Can I get help with 2013 Acura ZDX Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Suspension Parts and more.

What is your return policy for Acura ZDX Suspension Parts?

Advance Auto Parts keeps returns simple. For new Acura ZDX Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.