2012 Volkswagen GTI Suspension Parts

Essential 2012 Volkswagen GTI Suspension Parts

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA316)

Control Arm Lower Inner Rear Bushing

from

$320.99
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Coil Springs Lowered (Part No.WSK-VWN003)

Coil Springs Lowered

from

$336.99
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 4.1kg/mm (229lb/in) front rated springs that provide a 25mm drop while the 3.5kg/mm (134lb/in) rated rears deliver a desirable 20mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.

Product Features:
  • Cold rolled in Europe from the highest quality material.
  • These progressive rate springs are designed to provide improved performance without compromising ride quality characteristics.
  • Engineered for superior fit/performance with OEM shocks while produced to the finest tolerances ensuring exact fitment.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

MOOG – Strut Bellows (Part No.K90460)

Strut Bellows

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Monroe – OESpectrum Strut (Part No.72312)

OESpectrum Strut

from

$141.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Corteco – Control Arm Bushing (Part No.L2030415920CFW)

Control Arm Bushing

from

$13.32
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Rein – Suspension Protection Boot (Part No.SCB0362)

Suspension Protection Boot

from

$24.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

Product Features:
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Part has a high corrosion resistance for maximum life.
  • Matches original equipment design specifications.
See More

Whiteline – Essential Vehicle Kit (Part No.WEK004)

Essential Vehicle Kit

from

$488.99
By matching key bushing, alignment and geometry products into one solution, Whiteline Essential Kits provide bang for your buck handling upgrades that simply Activate More Grip. Essentials include the famous front anti lift/ caster kit, steering precision rack and control arm bushings that deliver go kart like steering and next level grip to your vehicle.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Febi – Sway Bar Link Nut (Part No.L1038413440FEB)

Sway Bar Link Nut

from

$1.83
Sway Bar Link Nut

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Monroe – Strut-Mate Shock Mounting Kit (Part No.907947)

Strut-Mate Shock Mounting Kit

from

$66.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5611)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Shock Bellows Bump Stop Kit (Part No.L4030108063KYB)

Shock Bellows Bump Stop Kit

from

$30.41
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:
  • Made from premium quality cellular polyurethane
  • The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
  • KYB Bump Stop Kits suit a variety of vehicle applications
  • KYB Bump Stop Kits perfectly compliment KYB Struts
See More

KYB – Strut Mount and Bearing (Part No.SM5567)

Strut Mount and Bearing

from

$85.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

APA/URO Parts – Strut Bump Stop (Part No.L3036232901APA)

Strut Bump Stop

from

$6.39
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style struts
  • Are built with design and quality that matches or exceeds OE quality
See More

Whiteline – Grip Series Kit (Part No.GS1-VWN002)

Grip Series Kit

from

$1120.99
The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) sway bars, drop links and performance lowering springs.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Lemfoerder – OE Replacement Control Arm (Part No.L2000664537LEM)

OE Replacement Control Arm

from

$57.81
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • Manufactured using high quality OE materials.
  • Includes factory specified hardware.
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815219)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$167.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

MOOG – Suspension Strut Mount (Part No.K160132)

Suspension Strut Mount

from

$75.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Superior rubber to steel bonding for durability
  • Engineered to meet or exceed OE requirements
  • Provides like-new steering ease of installation and longer life
  • Incorporates proven design and engineering features
See More

Whiteline – Control Arm Lower Arm (Part No.KTA262)

Control Arm Lower Arm

from

$602.99
These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with -0.3deg camber and +2.5deg caster improvements into these arms to optimise wheel alignments settings for track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. Whiteline’s rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced ‘toe-change’ during hard cornering, creating impressive (more…)

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Rein – Suspension Bump Stop Set (Part No.AVX0296P)

Suspension Bump Stop Set

from

$29.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Whiteline – Trailing Arm Front Bushing (Part No.W0504)

Trailing Arm Front Bushing

from

$80.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Rein – Bushing (Part No.AVB0358R)

Bushing

from

$12.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
See More

Firestone Ride-Rite – Air Spring, Mounts Inside Coil Spring, 500 To 1000 Pound Leveling Capacity (Part No.4176)

Air Spring, Mounts Inside Coil Spring, 500 To 1000 Pound Leveling Capacity

from

$139.99
Discover the difference Coil-Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil-Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RV and SUV. The adjustable Coil-Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil-Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil-Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:
  • Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
  • Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
  • Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
  • Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
  • No Drill Installation
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

MOOG – Shock Mount (Part No.K160272)

Shock Mount

from

$49.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Shock Mount (Part No.RP53644)

Shock Mount

from

$82.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore steering and handling
See More

APA/URO Parts – Spring Seat (Part No.L5005946812APA)

Spring Seat

from

$22.71
The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

APA/URO Parts – Spring Seat (Part No.L5005946811APA)

Spring Seat

from

$22.14
The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

2012 Volkswagen GTI Suspension Parts

You count on your 2012 Volkswagen GTI to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 74 Suspension Parts ranging in price from $1.83 to $1,120.99, you’re sure to find everything you need for your 2012 Volkswagen GTI.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 15 different brands like Monroe, Moog, and KYB. 2012 Volkswagen GTI Suspension Parts start as low as $1.83!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 152 extensive product reviews on 2012 Volkswagen GTI Suspension Parts. Some of the top-rated Suspension Parts products we carry are Control Arm with 5.0 stars and Strut Mount and Bearing with 4.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2012 Volkswagen GTI below to get started!

Top-Rated Suspension Parts Brands For Your 2012 Volkswagen GTI

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Volkswagen GTI running right for years to come. In our inventory you’ll find brands like Monroe, Moog, KYB, and even more.

Popular Monroe Suspension Parts

You’ll find popular Monroe brand products across Shocks and Struts. All are waiting to get your 2012 Volkswagen GTI back on the road. Some of the top-rated Monroe products in these categories are:
Shock-Mate Shock Absorber Boot Kit
from $13.29
(13)
Shock-Mate Shock Absorber Boot Kit
Shock Boots, Levelers, and Accessories
Shock-Mate Shock Absorber Boot Kit
from $13.99
(35)
Shock-Mate Shock Absorber Boot Kit
Strut Bellows
OESpectrum Passenger Car Shock Absorber
from $85.99
(9)
OESpectrum Passenger Car Shock Absorber
Rear Shock and Struts

FAQs for 2012 Volkswagen GTI Suspension Parts

What are the most purchased Suspension Parts for the 2012 Volkswagen GTI?

Out of 74 Suspension Parts for the 2012 Volkswagen GTI, the most popular in our inventory are:
Strut Bellows
from $35.99
(10)
Strut Bellows
Strut Bellows
Strut-Mate Strut Mounting Kit
from $72.99
This product is not rated
Strut-Mate Strut Mounting Kit
Suspension Strut Mounting Kits
Jounce Bumper and Bellows
from $18.99
(6)
Jounce Bumper and Bellows
Strut Bellows

What are the top-rated 2012 Volkswagen GTI Suspension Parts?

Top-rated Suspension Parts for your 2012 Volkswagen GTI based on customer reviews/ratings are:
Control Arm
from $82.99
(1)
Control Arm
“Works like a champion”
Strut Mount and Bearing
from $85.99
(1)
Strut Mount and Bearing
“Welded flanges were a little bigger than stock cat.It was hard to get socket on lower header bolt welded flange sticks out over bolts.Everything else ”
Suspension Strut Mount
from $75.99
(1)
Suspension Strut Mount
“Good quality, no noise”