2012 Toyota Tacoma Drive Shafts and Axles
More 2012 Toyota Tacoma Drive Shafts and Axles
Find your specific 2012 Toyota Tacoma original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2012 Toyota Tacoma Drive Shafts and Axles
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69133)
from
$111.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170)
from
$147.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)
from
$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″
- 23 spline
Yukon Gear – Yoke For ’04 And Older Toyota Tacoma And T100 With 30 Spline (Part No.41103)
from
$125.99
Yukon yoke for ’04 and older Toyota Tacoma and T100 with 30 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 2004 and down Toyota Tacoma and T100
- 30 spline
- 60mm x 60mm bolt pattern
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
NSK – Wheel Bearing Assembly (Part No.K8005410854NSK)
from
$140.51
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer. Double-row angular or taper contact ball bearing with integral high performance seal. Easy and reliable preload settings and include a simple mounting process with no spacer required. Hub bearings utilize an integral high-performance seal and feature a compact design with no grease packing required. NSK Hub unit bearings are designed to meet increasingly strict requirements that demand lighter weight, greater promotion of fuel efficiency, and enhanced module production systems.
Product Features:
See More
Product Features:
- Easy and reliable preload setting
- Easy mounting process
- No spacer required
- No grease packing required
- Compact
- Integral high performance seal.
Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)
from
$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
- Includes axle bearing, inner and outer axle seals and snap ring
- This kit will not work with ABS applications
- Services one side
National – Multi Purpose Seal (Part No.223253)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)
from
$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Differential Vent Breather (Part No.924-284)
from
$6.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6138)
from
$106.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 15-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2015-2021
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.2570 INCH / 32 MM
- CENTERLINE: 0.14 INCH / 4 MM
- MOUNT WIDTH: 6.76 INCH / 172 MM
- STYLE: ROUND FRAME
- WITH WINGS
- NO STUDS
Spicer – Center Support Bearing (Part No.211750-1X)
from
$129.99
Center Support Bearing
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6074)
from
$106.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 93-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1993-2021
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 6.00 INCH / 152 MM
- BOTTOM: SINGLE WEEP HOLE
- FRONT
- CUT-OUT NOTCH
Dorman – Rear Drive Shaft (Part No.986-194)
from
$931.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Rear Drive Shaft: Greasable, Direct Replacement (Part No.65-5027)
from
$1227.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-164)
from
$821.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Axle Bearing Puller Tool (Part No.56065)
from
$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.
Product Features:
See More
Product Features:
- Axle bearing puller
- Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
- Works on Toyota rear applications
Yukon Gear – 7.5" Reverse Tacoma & Tundra Right Hand Stub Axle Side Seal (Part No.30337)
from
$65.99
7.5″ Reverse Tacoma & Tundra Right hand stub axle side seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Stub axle seal
- Fits reverse rotation Toyota 7.5″ front
- Right hand side
Yukon Gear – Outer Axle Seal For Toyota 7.5", 8" & V6 Rear (Part No.30012)
from
$42.99
Outside axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear outer axle seal
- Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
Yukon Gear – 7.5" Reverse Tacoma & Tundra Left Hand Stub Axle Side Seal (Part No.30338)
from
$42.99
7.5″ Reverse Tacoma & Tundra left hand stub axle side seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Stub axle seal
- Fits reverse rotation Toyota 7.5″ front
- Left hand side
Yukon Gear – Rear Inner Axle Seal ’03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser (Part No.30335)
from
$57.99
Toyota rear inner axle seal, 03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser,Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits 2003 and up Toyota T100 and Tacoma
Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)
from
$22.99
Product Features:
See More
- Bearing retainer
- Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
Popular 2012 Toyota Tacoma Drive Shafts and Axles Categories
2012 Toyota Tacoma Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2012 Toyota Tacoma. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 45 different Drive Shafts and Axles in our inventory ranging from $6.99 to $1,266.99. That means you can find the exact parts or products you need to keep that 2012 Toyota Tacoma running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Toyota Tacoma. Carquest Premium, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2012 Toyota Tacoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 246 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 4.5 stars and Shaft Repair Sleeve with 4.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2012 Toyota Tacoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2012 Toyota Tacoma Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Toyota Tacoma demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Tacoma the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman Drive Shafts and Axles
We carry Dorman parts in our stock across Center Support Bearings categories, plus more. For a 2012 Toyota Tacoma, our most popular Dorman Drive Shafts and Axles include:
Top 2012 Toyota Tacoma Drive Shafts and Axles from Carquest Premium
Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2012 Toyota Tacoma. Popular Carquest Premium parts include:
FAQs for 2012 Toyota Tacoma Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2012 Toyota Tacoma?
Out of 45 Drive Shafts and Axles for the 2012 Toyota Tacoma, the most popular in our inventory are:
What are the top-rated 2012 Toyota Tacoma Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 2012 Toyota Tacoma based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
from
$140.51
(1)
Wheel Bearing Assembly
“They went on with no problem and are a perfect fit for my dodge.”
