2016 Toyota Tacoma Drive Shafts and Axles

Essential 2016 Toyota Tacoma Drive Shafts and Axles

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)

CV Axle Shaft Assembly

from

$203.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Dorman – Differential Vent Breather (Part No.924-284)

Differential Vent Breather

from

$6.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)

7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip

from

$10.99
Product Features:
  • Rear axle bearing snap ring for Toyota 7.5″, 8″ and V6
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Axle Bearing Puller Tool (Part No.56065)

Axle Bearing Puller Tool

from

$529.99
Axle bearing puller tool (plate style) for Toyotas. The Yukon axle bearing Puller safely removes pressed on axle bearings for a variety of applications. Cutting a bearing off an axle can damage the axle and is potentially dangerous. The Yukon axle bearing Puller can be used with a press or with the Yukon carrier bearing Puller and an air-gun to safely and quickly remove bearings. No return.

Product Features:
  • Axle bearing puller
  • Works with an impact gun or hydraulic press to safely and easliy remove axle bearings
  • Works on Toyota rear applications
See More

Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)

Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear

from

$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
  • Includes axle bearing, inner and outer axle seals and snap ring
  • This kit will not work with ABS applications
  • Services one side
See More

Yukon Gear – T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra (Part No.10059)

T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra

from

$298.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. T100 rear differential W/ ABS fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for 2001-2002 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra rear
  • Includes axle bearing, inner and outer axle seals and snap ring
  • This kit will work with ABS applications
  • Services one side
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-751)

Rear Drive Shaft: OE Fix

from

$502.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly
  • Rear Drive Shaft: OE Fix
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Dorman – Rear Drive Shaft (Part No.986-194)

Rear Drive Shaft

from

$931.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – Multi Purpose Seal (Part No.223253)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6073)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$118.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 93-21;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1993-2021
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.50 INCH / 13 MM
  • MOUNT WIDTH: 6.00 INCH / 152 MM
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6138)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$106.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 15-21;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2015-2021
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.2570 INCH / 32 MM
  • CENTERLINE: 0.14 INCH / 4 MM
  • MOUNT WIDTH: 6.76 INCH / 172 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
  • NO STUDS
See More

Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)

Toyota Bearing Retainer For '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

from

$22.99
Product Features:
  • Bearing retainer
  • Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

Yukon Gear – Yoke For ’04 And Older Toyota Tacoma And T100 With 30 Spline (Part No.41103)

Yoke For '04 And Older Toyota Tacoma And T100 With 30 Spline

from

$125.99
Yukon yoke for ’04 and older Toyota Tacoma and T100 with 30 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 2004 and down Toyota Tacoma and T100
  • 30 spline
  • 60mm x 60mm bolt pattern
See More

Yukon Gear – Pinion Flange Dust Shield For Toyota 8" Clamshell Front (Part No.33548)

Pinion Flange Dust Shield For Toyota 8" Clamshell Front

from

$25.99
Product Features:
  • Pinion flange dust shield
  • Fits Toyota 8″ clamshell front
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Rear Wheel Seal For ’00-’04 Tacoma, ’00-’06 Tundra & ’01-’02 4 Runner (Part No.30354)

Rear Wheel Seal For '00-'04 Tacoma, '00-'06 Tundra & '01-'02 4 Runner

from

$38.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 6.50 ratio
See More

Yukon Gear – 7.5" Reverse Tacoma & Tundra Left Hand Stub Axle Side Seal (Part No.30338)

7.5" Reverse Tacoma & Tundra Left Hand Stub Axle Side Seal

from

$42.99
7.5″ Reverse Tacoma & Tundra left hand stub axle side seal.Yukon Mighty seal.

Product Features:
  • Stub axle seal
  • Fits reverse rotation Toyota 7.5″ front
  • Left hand side
See More

Yukon Gear – Rear Inner Axle Seal ’03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser (Part No.30335)

Rear Inner Axle Seal '03+ 4Runner,'05+Tacoma, 07-13 FJ Cruiser

from

$57.99
Toyota rear inner axle seal, 03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser,Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits 2003 and up Toyota T100 and Tacoma
See More

Yukon Gear – Outer Axle Seal For Toyota 7.5", 8" & V6 Rear (Part No.30012)

Outer Axle Seal For Toyota 7.5", 8" & V6 Rear

from

$42.99
Outside axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.

Product Features:
  • Rear outer axle seal
  • Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6
See More

Yukon Gear – 1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface (Part No.30220)

1177, 7.5", 8", V6 Toyota Redi Sleeve, Saver For Seal Surface

from

$65.99
1177, 7.5″, 8″, V6 Toyota REDI sleeve, saver for seal surface.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Toyota 7.5″, 8″ and V6
See More

2016 Toyota Tacoma Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2016 Toyota Tacoma. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 34 different Drive Shafts and Axles in our inventory ranging from $6.99 to $1,126.99. That means you can find the exact parts or products you need to keep that 2016 Toyota Tacoma running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Toyota Tacoma. Carquest Premium, Spicer, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2016 Toyota Tacoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2016 Toyota Tacoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2016 Toyota Tacoma Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Toyota Tacoma demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Tacoma the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular NSK Drive Shafts and Axles

We carry NSK parts in our stock across Axle Shaft Bearing Assemblies categories, plus more. For a 2016 Toyota Tacoma, our most popular NSK Drive Shafts and Axles include:
Wheel Bearing Assembly
from $140.51
(1)
Wheel Bearing Assembly
Axle Shaft Bearing Assemblies

Top 2016 Toyota Tacoma Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2016 Toyota Tacoma. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $147.99
(38)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 2016 Toyota Tacoma Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2016 Toyota Tacoma?

Out of 34 Drive Shafts and Axles for the 2016 Toyota Tacoma, the most popular in our inventory are:
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Multi Purpose Seal
from $10.79
(5)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $20.49
(3)
Multi Purpose Seal
Axle Shaft Seals