from

$353.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Toyota 8″ clamshell front
Reverse rotation only
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$61.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), pinion shim kit, marking compound and brush. No side shims.

Product Features:

Fits Toyota 7.5″ front with 4 cylinder engine
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$508.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 29 spline pinion.

Product Features:

Fits Toyota V6 rear
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, oil baffles and slingers, thread locker, marking compound and brush.

from

$19.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$782.99

Differential

from

$12.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o

from

$76.52

Differential Bearing

from

$115.99

Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:

Bearing race driver
Fits 30306 race
All steel construction

from

$73.99

Product Features:

Cross pin shaft
Fits Toyota Tacoma and T100

from

$42.99

Product Features:

MINI-INSTL KT-TOYOTA 7.5″

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$7.99

Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:

Oil baffle
Fits Toyota Landcruiser reverse rotation front

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$466.99

Product Features:

30 spline
6 lug
29.25″ long
Fits 1995-2000 Tacoma and 1996-2000 4Runner
Non ABS applications only

from

$794.99

V6 standard Open case, bare.

Product Features:

Standard open carrier case
Does not include spider gears
Fits Toyota V6

from

$15.99

Toyota T100 & Tacoma pinion nut.

Product Features:

Pinion nut
Fits Toyota Tacoma and T100 without factory locking differential

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$224.99

Product Features:

Full spool
Fits Toyota V6 rear

from

$13.20

Pinion Seal

from

$18.99

Product Features:

Side gear thrust washer
Fits Toyota Tacoma and T100

from

$72.99

8″ Toyota solid crush sleeve replacement spacer kit, preload.

Product Features:

Crush sleeve eliminator kit for Toyota 8″ with 4 cylinder engine

from

$8.99

Product Features:

Roll pin
Fits Toyota Tacoma and T100

from

$498.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. This is a thick gear for a 3.73 & down carrier. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 8″ Toyota clamshell front
8.00″ ring gear diameter
29 spline pinion
10 ring gear bolts
4.88 ratio
Thick gear for 3.73 and down carrier

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$10.99

V6 standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits Toyota V6

from

$135.99

Product Features:

Conversion kit
Fits Toyota V6 rear with 29 spline pinion
Includes yoke , pinion seal, and pinion nut

from

$245.99

Yukon yoke for Toyota 8″ IFS clamshell design, ’07 & up FJ, 05 & up Tacoma, T100 Tundra. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Toyota 8″ clamshell front
29 spline
66mm x 66mm bolt pattern

2012 Toyota Tacoma Differentials

More 2012 Toyota Tacoma Differentials

Essential 2012 Toyota Tacoma Differentials

Yukon Gear – Pinion Install Kit For Toyota Clamshell Design Front Reverse Rotation Differential (Part No.13102)

Yukon Gear – Minor Install Kit For Toyota 7.5" IFS Differential, 4 Cylinder (Part No.12070)

Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No.30040093-75000C)

USA Standard Gear – Master Overhaul Kit For The Toyota V6, ’03 & Up (Part No.37075)

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Yukon Gear – Differential (Part No.26051)

Motive Gear – Differential Pinion Seal (Part No.1177)

SKF – Differential Bearing (Part No.J7060163890SKF)

Yukon Gear – Bearing Race Driver (Part No.56005)

Yukon Gear – T100 & Tacoma Standard Cross Pin Shaft (Part No.33417)

Motive Gear – Differential Gear Install Kit (Part No.TOYIKIFS)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Oil Baffle (Part No.33007)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – Rear Axle For ’95-’00 Tacoma & ’96-’00 4Runner, Non-ABS (Part No.21739)

Yukon Gear – Standard Open Carrier Case, Toyota V6 (Part No.20110)

Yukon Gear – Toyota T100 & Tacoma Pinion Nut (Part No.33160)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

USA Standard Gear – Spool For Toyota V6 (Part No.59012)

NOK – Pinion Seal (Part No.J7010163810NOK)

Yukon Gear – T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm (Part No.33399)

Yukon Gear – Crush Sleeve Eliminator Kit For Toyota 8" (Part No.55052)

Yukon Gear – T100 & Tacoma Roll Pin (Part No.33420)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota FJ Cruiser Front, 4.88 Ratio, Thick (Part No.24565)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut (Part No.41212)

Yukon Gear – Yoke For Toyota 8" IFS Clamshell Design, ’07 & Up FJ, 05 & Up Tacoma, T100 Tundra (Part No.41176)

Popular 2012 Toyota Tacoma Differentials Categories

2012 Toyota Tacoma Differentials

Differentials Brands To Make Your 2012 Toyota Tacoma Last

Popular Idemitsu Differentials

FAQs for 2012 Toyota Tacoma Differentials

What are the most purchased Differentials for the 2012 Toyota Tacoma?

What are the top-rated 2012 Toyota Tacoma Differentials?

More Popular Parts for All Makes