2012 Nissan Xterra Ignition Coils and Boots
More 2012 Nissan Xterra Ignition Coils and Boots
Find your specific 2012 Nissan Xterra original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2012 Nissan Xterra Ignition Coils and Boots
NGK – Spark Plug Wire Set (Part No.8113)
from
$164.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Ignition Wire Set (Part No.F1020425128NGK)
from
$104.97
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7049)
from
$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6095)
from
$84.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48845)
from
$116.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1019-6)
from
$329.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Driveworks – Coil on Plug Coil (Part No.26378)
from
$88.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-4023)
from
$116.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1408)
from
$89.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1019)
from
$74.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49023)
from
$98.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005292600HIT)
from
$87.78
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
DENSO – Coil On Plug Boots-6 (Part No.671-6275)
from
$114.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6197)
from
$88.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest – Manifold Absolute Pressure Sensor Connector (Part No.PT2315)
from
$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Popular 2012 Nissan Xterra Ignition Coils and Boots Categories
2012 Nissan Xterra Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 2012 Nissan Xterra. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 12 different Ignition Coils and Boots in our inventory ranging from $5.49 to $381.99. That means you can find the exact parts or products you need to keep that 2012 Nissan Xterra running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Nissan Xterra. Carquest Premium, Carquest, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 2012 Nissan Xterra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 120 reviews in this category, some of the top rated parts include Ignition Coil Actual OE Part – New with 4.0 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2012 Nissan Xterra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 2012 Nissan Xterra Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Nissan Xterra demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Xterra the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Premium Ignition Coils and Boots
We carry Carquest Premium parts in our stock across Ignition Coil Boots categories, plus more. For a 2012 Nissan Xterra, our most popular Carquest Premium Ignition Coils and Boots include:
from
$6.99
(11)
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
Ignition Coil Boots
Top 2012 Nissan Xterra Ignition Coils and Boots from Driveworks
Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 2012 Nissan Xterra. Popular Driveworks parts include:
FAQs for 2012 Nissan Xterra Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 2012 Nissan Xterra?
Out of 12 Ignition Coils and Boots for the 2012 Nissan Xterra, the most popular in our inventory are:
from
$81.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
from
$89.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
What are the top-rated 2012 Nissan Xterra Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 2012 Nissan Xterra based on customer reviews/ratings are:
from
$117.99
(5)
Ignition Coil Actual OE Part – New
“Time will tell how reliable it is long term. I replaced the original after 9yrs/160k miles. Fit and finish appeared identical to OEM, which I believe ”
