2012 Mercedes-Benz GL550 Steering and Chassis Parts

Below you will find various in-demand Mercedes-Benz Steering and Chassis Parts, components and accessories for your 2012 GL550. Advance Auto Parts has popular GL550 parts like Power Steering Parts, Sway Bars, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other GL550 model years including 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016 and more. Select a category of 2012 Mercedes-Benz GL550 Steering and Chassis Parts below and start saving instantly.

Popular 2012 Mercedes-Benz GL550 Steering and Chassis Parts Categories

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Drive Shaft CV Joints

Power Steering Reservoirs

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Power Steering O-Rings

Power Steering Reservoir Gaskets

Essential Steering and Chassis Parts for 2012 Mercedes-Benz GL550s

from

$5.70

P/S Reservoir Gasket

from

$2.55

A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Power steering reservoir to pump.

from

$130.64

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$59.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$1262.99

PWR New Rack & Pinions are engineered and manufactured for superior performance and reliability. All racks have precision manufacturing controlled internal components. PWR Rack & Pinions enhance installation efficiency, address premature product-based failures, and increase lasting customer satisfaction.

Product Features:

All PWR units are 100% NEW
Factory Installed Rack Integrated Mounting Bushings
Best-In-Class Industrial Grade Packaging
PWR Engineering Approved Tie Rod, Boot, and Boot Seal Designs
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$1046.82

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

OE quality and direct fit replacement
Manufactured based on highest quality OE standards

from

$64.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$91.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$199.78

Driveshaft Flex Join

from

$22.76

The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$66.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$68.26

P/S Reservoir

from

$246.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$246.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$18.76

Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:

Manufactured as a direct OE replacement
Pressure tested to maintain a consistent flow
Backed by the manufactures warranty against workmanship and material defects

from

$32.49

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$32.99

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$106.73

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$94.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$354.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$384.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$373.99

Remanufactured Bosch power steering pumps designed for an optimum performance and direct replacement of the original equipment. Bosch range offers both electric and mechanical pumps. Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.

Product Features:

Designed to minimize power consumption
Seals, synthetic and plastic parts are replaced 100%
Capable to deliver high capacity pressures for all driving demands
Undergos extensive testing
Highly efficient design and manufacture from the OE know how

from

$3.81

P S Hose Seal

Upgrade your 2012 Mercedes-Benz GL550 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Mercedes-Benz GL550, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Steering and Chassis Parts are key to keeping your GL550 functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Steering and Chassis Parts for the 2012 Mercedes-Benz GL550, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2012 Mercedes-Benz GL550 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.55 to $1,262.99, with an average price of $182.32. Our 65 Steering and Chassis Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2012 Mercedes-Benz GL550 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Mercedes-Benz GL550, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 89 customer reviews and counting, our 2012 Mercedes-Benz GL550 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Mercedes-Benz GL550 is always ready to roll. We’re committed to providing you with everything you need to keep your GL550 in top shape, all in one place. Start shopping confidently below for your 2012 Mercedes-Benz GL550!

Best-Selling Power Steering Parts for 2012 Mercedes-Benz GL550s

Enhance the driving experience in your Mercedes-Benz with 31 quality Power Steering Part components, starting at $6.99.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$333.99

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$68.26

P/S Reservoir

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$66.99

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$20.09

Steering Rack Boot Kit

from

$349.99

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$621.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$1262.99

All PWR units are 100% NEW
Factory Installed Rack Integrated Mounting Bushings
Best-In-Class Industrial Grade Packaging
PWR Engineering Approved Tie Rod, Boot, and Boot Seal Designs
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$1046.82

OE quality and direct fit replacement
Manufactured based on highest quality OE standards

from

$706.99

NEW RACK & PINION

from

$694.80

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$620.99

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
Performance testing ensures perfect fit, function and reliable performance.
Computerized spool valve balancing ensures exceptional steering feel.
Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
Built to meet or exceed O.E.M. performance.

from

$499.02

Designed to minimize power consumption
Seals, synthetic and plastic parts are replaced 100%
Capable to deliver high capacity pressures for all driving demands
Undergos extensive testing
Highly efficient design and manufacture from the OE know how

from

$465.99

REMAN RACK & PINION

from

$451.50

P/S Pump

from

$384.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$373.99

Designed to minimize power consumption
Seals, synthetic and plastic parts are replaced 100%
Capable to deliver high capacity pressures for all driving demands
Undergos extensive testing
Highly efficient design and manufacture from the OE know how

from

$354.99

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$344.25

AAE remanufactured Power Steering Pumps not only offer a high quality, low cost alternative to new parts, but are the leading choice in the remanufactured market.

Product Features:

OEM-Quality and Direct Fit replacement.
Original Equipment Supplier
100% new, premium-grade seals
Surface wear on cam packs are microfinished
Seal surface on input shafts are microfinished for leak-free sealing
Pumps are thoroughly tested

from

$259.99

NEW P/S PUMP

from

$56.99

P/S FLUID RESERVOIR

from

$32.99

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$18.76

Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:

Manufactured as a direct OE replacement
Pressure tested to maintain a consistent flow
Backed by the manufactures warranty against workmanship and material defects

from

$6.99

POWER STEERINGFILTER

Most Popular 2012 Mercedes-Benz GL550 Sway Bars

Customize your Mercedes-Benz with 12 Sway Bars products like Sway Bar Link Kits and Sway Bar Bushings, all priced under $91.99.

show more show less

from

$59.78

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$54.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$66.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$91.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$66.87

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$65.00

Sway Bar Link

from

$61.65

Sway Bar Link

from

$50.99

This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$28.68

The Vaico Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$27.89

Sway Bar Link

from

$22.76

The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$19.42

SWAY BAR BUSHING

Top Picks for 2012 Mercedes-Benz GL550 Ball Joints

Upgrade Mercedes-Benz GL550s with top-quality Ball Joints parts, including 10 OEM and aftermarket selections for your 2012 model.

show more show less

from

$118.54

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$59.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$185.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$115.97

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$185.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$130.64

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$116.13

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$95.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$66.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$44.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

In-Demand Steering Hardware for 2012 Mercedes-Benz GL550s

Select from 3 premium Steering Hardware parts for your 2012 Mercedes-Benz GL550, with prices ranging from $2.55 to $5.70.

show more show less

from

$5.70

P/S Reservoir Gasket

from

$3.81

P S Hose Seal

from

$2.55

Most Sold 2012 Mercedes-Benz GL550 Tie Rods

Explore our best-selling Mercedes-Benz parts for the 2012 GL550 among 8 OEM and aftermarket options starting from $22.99.

show more show less

from

$105.71

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$68.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$106.73

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$104.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$84.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$43.18

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi tie rods are fatigue tested to avoid failure
Delphi includes the necessary accessories for a complete job
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$41.08

FEBI Tie rod ends strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod ends ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$22.99

Top-Rated Steering and Chassis Parts Brands For Your 2012 Mercedes-Benz GL550

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2012 Mercedes-Benz GL550s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, and more. Steering and Chassis Parts from these brands that fit a 2012 GL550 start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2012 Mercedes-Benz GL550 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Mercedes-Benz GL550, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2012 Mercedes-Benz GL550. With over 11 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $297.99. Plus, with over 64 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$621.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$349.99

This product is not rated

New Power Steering Pump

“”

FAQs for 2012 Mercedes-Benz GL550 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2012 Mercedes-Benz GL550s?

Out of 65 Steering and Chassis Parts that fit 2012 Mercedes-Benz GL550s, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Power Steering Filter (10417592) – $46.99
Stabilizer Bar Link (20519821) – $54.99

What’s the price range for 2012 Mercedes-Benz GL550 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2012 Mercedes-Benz GL550 start at $2.55 and go up to $1,262.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2012 Mercedes-Benz GL550?

The average price for Steering and Chassis Parts for the 2012 Mercedes-Benz GL550 is $182.32. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mercedes-Benz GL550 model years?

Yes, we currently carry Steering and Chassis Parts for 8 model years of Mercedes-Benz GL550s between 2008 and 2016. Steering and Chassis Parts are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2011, 2010, 2009, and 2008.

What are the cheapest Steering and Chassis Parts for my 2012 Mercedes-Benz GL550?

The cheapest 2012 Mercedes-Benz GL550 Steering and Chassis Parts we carry in stock are:

Power Steering Reservoir Gasket (10758042) – $2.55
P S Hose Seal (11194236) – $3.81
P/S Reservoir Gasket (11815398) – $5.70
POWER STEERINGFILTER (50167394) – $6.99
Power Steering Return Line Assembly (11833091) – $18.76

What are the top-rated Steering and Chassis Parts that fit the 2012 Mercedes-Benz GL550?

Out of 89 reviews by customers, our 2012 Mercedes-Benz GL550 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2012 Mercedes-Benz GL550 and their top-rated products:

Tie Rods
- TRW Tie Rod End (10776223) – $105.71
Sway Bars
- TRW Tie Rod End (10776223) – $105.71

What types of Steering and Chassis Parts do you sell for my 2012 Mercedes-Benz GL550?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2012 Mercedes-Benz GL550:

Can I get help with 2012 Mercedes-Benz GL550 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Steering and Chassis Parts and more.

What is your return policy for Mercedes-Benz GL550 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz GL550 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Mercedes-Benz GL550 Steering and Chassis Parts

Meistersatz – P/S Reservoir Gasket (Part No.M2032168381MEI)

APA/URO Parts – Power Steering Reservoir Gasket (Part No.M2032168381APA)

TRW – Ball Joint (Part No.L2020237820TRW)

Beck/Arnley – Ball Joint (Part No.101-7021)

PWR – New Hydraulic Power Rack and Pinion (Part No.42-2323)

TRW – Complete Steering Rack, Remanufactured (Part No.M1000899934TRW)

MOOG – Stabilizer Bar Link (Part No.K750791)

Rare Parts – Sway Bar Link (Part No.RP19812)

Febi – Driveshaft Flex Join (Part No.K1020569201FEB)

Lemfoerder – Sway Bar Bushing (Part No.L1050237959LEM)

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-721)

Lemfoerder – P/S Reservoir (Part No.M2030295199LEM)

Dorman – Suspension Control Arm (Part No.524-518)

Dorman – Suspension Control Arm (Part No.524-517)

Burgaflex – Power Steering Return Line Assembly (Part No.M2016389663BUR)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3083)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3082)

TRW – TRW Tie Rod End (Part No.M3010265023TRW)

Rare Parts – Tie Rod End (Part No.RP29510)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Cardone New – New Power Steering Pump (Part No.96-341)

Cardone – Remanufactured Power Steering Pump (Part No.21-341)

Bosch – Power Steering Pump, Remanufactured (Part No.M20101069497BOS)

Trucktec – P S Hose Seal (Part No.M2027418382TRC)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – Power Steering Pump (Part No.21-120)

Cardone – New Power Steering Filter (Part No.20-0038F)

Lemfoerder – P/S Reservoir (Part No.M2030295199LEM)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-721)

Lemfoerder – Steering Rack Boot Kit (Part No.M1030297665LEM)

Cardone New – New Power Steering Pump (Part No.96-120)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-4022)

PWR – New Hydraulic Power Rack and Pinion (Part No.42-2323)

TRW – Complete Steering Rack, Remanufactured (Part No.M1000899934TRW)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3801N)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000422861MAV)

Cardone New – New Rack and Pinion Assembly (Part No.97-4022)

Bosch – Power Steering Pump, Remanufactured (Part No.M2010467249BOS)

Atlantic Automotive Eng – REMAN RACK & PINION (Part No.3801)

Cardone – P/S Pump (Part No.M2010900470CAR)

Cardone – Remanufactured Power Steering Pump (Part No.21-341)

Bosch – Power Steering Pump, Remanufactured (Part No.M20101069497BOS)

Cardone New – New Power Steering Pump (Part No.96-341)

Atlantic Automotive Eng. – Power Steering Pump, Remanufactured (Part No.M2010946681AAE)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5517N)

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0041)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3082)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Burgaflex – Power Steering Return Line Assembly (Part No.M2016389663BUR)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

Lemfoerder – Sway Bar Link (Part No.L1030322498LEM)

MOOG – Stabilizer Bar Link (Part No.K80496)

MOOG – Stabilizer Bar Link (Part No.K750318)

Rare Parts – Sway Bar Link (Part No.RP19812)

TRW – Stabilizer Link (Part No.L1030237957TRW)

Delphi – Sway Bar Link (Part No.L1030322498DEL)

Lemfoerder – Sway Bar Link (Part No.L1030237957LEM)

Dorman – Suspension Stabilizer Bar Link Kit (Part No.532-969)

Vaico – Sway Bar Link (Part No.L1030237957VCO)

Autopart International Inc – Sway Bar Link (Part No.L10301965713API)

Lemfoerder – Sway Bar Bushing (Part No.L1050237959LEM)

Worldpac – SWAY BAR BUSHING (Part No.L10504143824APA)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020392114LEM)

Beck/Arnley – Ball Joint (Part No.101-7021)

Dorman – Suspension Control Arm (Part No.521-522)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020237820LEM)

Dorman – Suspension Control Arm (Part No.521-521)

TRW – Ball Joint (Part No.L2020237820TRW)

TRW – Ball Joint (Part No.L2020392114TRW)

Rare Parts – Ball Joint (Part No.RP11957)

Rare Parts – Ball Joint (Part No.RP10550)

Rein – Ball Joint (Part No.SCB0342)