2012 Mazda MX-5 Miata Cooling and Climate Controls

Below you will find various in-demand Mazda Cooling and Climate Controls, components and accessories for your 2012 MX-5 Miata. Advance Auto Parts has popular MX-5 Miata parts like Air Conditioning Parts, Blend Doors, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other MX-5 Miata model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2012 Mazda MX-5 Miata Cooling and Climate Controls below and start saving instantly.

Popular 2012 Mazda MX-5 Miata Cooling and Climate Controls Categories

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Engine Coolant Thermostat Housing Caps

Thermostats

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Coolant Reservoir Caps

Blower Motor Resistors

AC Condensers

Radiator Fan Control Relays

AC Caps and Valve Core Kits

Thermostat Housing Gaskets

Thermostat Seals

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

Engine Coolant Outlet Seals

AC Compressor Clutch Connectors

Water Pump O-Rings

Essential Cooling and Climate Controls for 2012 Mazda MX-5 Miatas

from

$66.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$119.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$263.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$239.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$2.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$229.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$35.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$13.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.99

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$116.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Motor RPM equivalent to or exceeds OEM motor
Engineered for extended durability

from

$193.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$163.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$166.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.79

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$9.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$7.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$41.99

Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$21.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$11.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$38.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$224.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$20.99

Carquest A/C O-Rings and Gaskets are designed for optimal performance to protect your air conditioning parts and systems from unwanted leaks. They are designed to seal each connection with premium quality material and exact measurements.

from

$20.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

Upgrade your 2012 Mazda MX-5 Miata with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Mazda MX-5 Miata, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Cooling and Climate Controls are key to keeping your MX-5 Miata functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Cooling and Climate Controls for the 2012 Mazda MX-5 Miata, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2012 Mazda MX-5 Miata at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.99 to $263.99, with an average price of $70.03. Our 46 Cooling and Climate Controls in stock come from 12 trusted brands, so you’re sure to find the right part for your 2012 Mazda MX-5 Miata without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Mazda MX-5 Miata, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like FELPRO, Carquest Premium, Imperial, and more. FELPRO Cooling and Climate Controls start at just $2.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $14.99, and at an average 4.4 stars rating. With 1,824 customer reviews and counting, our 2012 Mazda MX-5 Miata Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Mazda MX-5 Miata is always ready to roll. We’re committed to providing you with everything you need to keep your MX-5 Miata in top shape, all in one place. Start shopping confidently below for your 2012 Mazda MX-5 Miata!

Best-Selling Air Conditioning Parts for 2012 Mazda MX-5 Miatas

Enhance the driving experience in your Mazda with 12 quality Air Conditioning Part components, starting at $20.99.

show more show less

from

$21.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$35.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$26.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$26.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$20.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$27.99

New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$166.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$263.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$193.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$163.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$21.99

from

$20.99

Top Picks for 2012 Mazda MX-5 Miata Engine Cooling Parts

Upgrade Mazda MX-5 Miatas with top-quality Engine Cooling Parts parts, including 30 OEM and aftermarket selections for your 2012 model.

show more show less

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$52.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$14.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$57.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$9.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$11.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$25.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.99

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$43.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$239.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$66.99

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$27.99

Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure extremely accurate temperature readings for optimal performance
O-rings, seals or thread sealant are included if required
Wires, clips and probe length match OE (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$33.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$6.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$168.99

New Platinum Pro Radiator, 2.0 Liter L4 Engine, Automatic Transmissiont, With Transmission Oil Cooler, 1 Row Core

Product Features:

2.0 Liter L4 Engine, Automatic Transmissiont, With Transmission Oil Cooler, 1 Row Core, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

In-Demand Blower Motor and Related Products for 2012 Mazda MX-5 Miatas

Select from 3 premium Blower Motor and Related Products parts for your 2012 Mazda MX-5 Miata, with prices ranging from $93.99 to $119.99.

show more show less

from

$116.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Motor RPM equivalent to or exceeds OEM motor
Engineered for extended durability

from

$119.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$93.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Top-Rated Cooling and Climate Controls Brands For Your 2012 Mazda MX-5 Miata

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2012 Mazda MX-5 Miatas. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 2012 MX-5 Miata start at just $2.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2012 Mazda MX-5 Miata Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Mazda MX-5 Miata, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2012 Mazda MX-5 Miata. With over 3 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $6.49. Plus, with over 4 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.49

(1)

Engine Coolant Thermostat Gasket

“Direct replacement for my Mazda. Exactly what I needed for a non heat up engine. Description did not include whether or not gasket was present. Gasket”

from $2.99

(1)

Multi-Purpose O-Ring

“Always the right part”

from $3.99

(2)

THERMOSTAT GASKET

“Great paper and silicone gasket, like oem quality with no leaks.”

Popular Carquest Premium 2012 Mazda MX-5 Miata Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2012 Mazda MX-5 Miata owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2012 MX-5 Miata, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $14.99 to $57.99, plus, with more than 275 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $14.99

(193)

Radiator Cap: 16 PSI

“fits better than OEM”

from $21.99

(41)

Radiator Cap: 16 PSI

“Mustang was heating up. Found out was cap. This cap pops to release pressure so not to pop radiator. Works great. Will buy again when needed.”

from $57.99

(41)

Engine Water Pump: New, Gasket/Seals Included

“Perfect replacement for old water pump.”

FAQs for 2012 Mazda MX-5 Miata Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2012 Mazda MX-5 Miatas?

Out of 46 Cooling and Climate Controls that fit 2012 Mazda MX-5 Miatas, the following parts are the top sellers:

Cap & Valve A/C System Seal Kit (15890310) – $21.99
Engine Camshaft Position Sensor Connector (20974645) – $26.49
Adjustable Thermostatic Fan Control (6016936) – $23.99

What’s the price range for 2012 Mazda MX-5 Miata Cooling and Climate Controls?

Cooling and Climate Control prices for the 2012 Mazda MX-5 Miata start at $2.99 and go up to $263.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2012 Mazda MX-5 Miata?

The average price for Cooling and Climate Controls for the 2012 Mazda MX-5 Miata is $70.03. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mazda MX-5 Miata model years?

Yes, we currently carry Cooling and Climate Controls for 18 model years of Mazda MX-5 Miatas between 2006 and 2025. Cooling and Climate Controls are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2012 Mazda MX-5 Miata?

The cheapest 2012 Mazda MX-5 Miata Cooling and Climate Controls we carry in stock are:

Multi-Purpose O-Ring (20688821) – $2.99
Engine Coolant Outlet Gasket (10067759) – $3.79
THERMOSTAT GASKET (15780986) – $3.99
Engine Coolant Thermostat Gasket (12547582) – $4.99
Engine Coolant Outlet Gasket (10968175) – $6.99

What are the top-rated Cooling and Climate Controls that fit the 2012 Mazda MX-5 Miata?

Out of 1,824 reviews by customers, our 2012 Mazda MX-5 Miata Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2012 Mazda MX-5 Miata and their top-rated products:

Engine Cooling Parts
- Multi-Purpose O-Ring (20688821) – $2.99
- Engine Coolant Thermostat Gasket (20688972) – $12.49
- Adjustable Thermostatic Fan Control (6016936) – $23.99

What types of Cooling and Climate Controls do you sell for my 2012 Mazda MX-5 Miata?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2012 Mazda MX-5 Miata:

Can I get help with 2012 Mazda MX-5 Miata Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Cooling and Climate Controls and more.

What is your return policy for Mazda MX-5 Miata Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mazda MX-5 Miata Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Mazda MX-5 Miata Cooling and Climate Controls

NTK – Engine Coolant Temperature Sensor (Part No.EF0160)

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1787)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713481)

Dorman – Radiator Fan Assembly: Single, Cost Effective and Reliable (Part No.621-415)

Felpro – Multi-Purpose O-Ring (Part No.35772)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813572)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83132)

Felpro – Engine Coolant Thermostat Gasket (Part No.35776)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10330)

Carquest Premium – Integrated Thermostat Housing: With Seal, 185 Degrees (Part No.48708)

Carquest Premium – Blower Motor: with Wheel (Part No.76979)

Carquest Premium – A/C Block Expansion Valve (Part No.T39516)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2272)

KAI – A/C Condenser (Part No.CNDDPI3481)

Felpro – Engine Coolant Outlet Gasket (Part No.35909)

Dorman – Help – Radiator Drain Cocks (Part No.61137)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13788)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1700)

Carquest Premium – A/C Valve Core/Cap (Part No.T26783)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Felpro – THERMOSTAT GASKET (Part No.35833)

Felpro – THERMOSTAT GASKET (Part No.35771)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1805)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-455)

Carquest Premium – A/C O-Ring/Gasket Kit (Part No.T26756)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26756)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83132)

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT5754)

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26756)

KAI – A/C Desiccant Element (Part No.ARD010085)

KAI – A/C Condenser (Part No.CNDDPI3481)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713481)

Carquest Premium – A/C Block Expansion Valve (Part No.T39516)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2272)

Carquest Premium – A/C Valve Core/Cap (Part No.T26783)

Carquest Premium – A/C O-Ring/Gasket Kit (Part No.T26756)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-455)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Dorman – Thermostat Assembly: Includes Housing and Thermostat Assembly, 180 Degrees (Part No.902-682)

Felpro – Engine Coolant Thermostat Gasket (Part No.35776)

Felpro – Multi-Purpose O-Ring (Part No.35772)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1230)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Felpro – THERMOSTAT GASKET (Part No.35771)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Dorman – Help – Radiator Drain Cocks (Part No.61137)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Felpro – THERMOSTAT GASKET (Part No.35833)

Carquest Premium – Coolant Temperature Sensor 1TS1019 (Part No.WTC1036)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1700)

Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.514-185)

Dorman – Radiator Fan Assembly: Single, Cost Effective and Reliable (Part No.621-415)

NTK – Engine Coolant Temperature Sensor (Part No.EF0160)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1733)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1786)

MAHLE Original – Engine Coolant Outlet Gasket (Part No.B31861)

KAI – Radiator (Part No.RAD2861)

Carquest Premium – Blower Motor: with Wheel (Part No.76979)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1787)

Dorman – HVAC Blower Motor Resistor (Part No.984-659)