2012 Land Rover Range Rover Evoque Brake Parts
More 2012 Land Rover Range Rover Evoque Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 2012 Land Rover Range Rover Evoque, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 2012 Land Rover Range Rover Evoque Brake Parts
Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH676538P)
from
$117.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Euro Stop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit (Part No.ESK6276)
from
$358.99
Product Features:
See More
- EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
- Rotors coated for optimum anti-corrosion protection
- High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
- Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Pads manufactured in Europe for European applications
- ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Includes 1 Front & 1 Rear Sensor Wire
- Buy with confidence from the originator & industry leader of brake kits
Carquest Platinum Painted – Painted Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield (Part No.YH603430P)
from
$82.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH421753P)
from
$64.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Disc Brake Caliper Bracket Mounting Bolt (Part No.H816)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Manufactured with quality materials to suppress high stress levels
- Prevents noise and premature wear
- Corrosion resistant coating for long-lasting durability against harsh roads
- Finished off with thread locker for extra security
Carquest Wearever – Disc Brake Caliper Bracket Mounting Bolt (Part No.H804)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Manufactured with quality materials to suppress high stress levels
- Prevents noise and premature wear
- Corrosion resistant coating for long-lasting durability against harsh roads
- Finished off with thread locker for extra security
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14197)
from
$21.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5089)
from
$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Professional Platinum – Ceramic Brake Pads – (4-Pad Set) (Part No.PXD1306H)
from
$36.99
Carquest Platinum Professional brake pads are a premium alternative to original equipment brake pads that provide superior stopping performance, quieter braking and cleaner wheels. All CQ Platinum Professional brake pads are manufactured by a vertically
Product Features:
See More
Product Features:
- Industry leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Updated HEX Shim Technology – engineered with aramid fibers to reduce noise and prevent shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- PTFE coated hardware and caliper pin grease included for nearly every application
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD1306)
from
$42.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)
from
$6.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.16193)
from
$10.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Economy Black – Disc Brake Caliper Repair Kit (Part No.41257)
from
$10.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Economy Black – Disc Brake Caliper Repair Kit (Part No.15443)
from
$5.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Carquest Wearever – Disc Hardware Kit with Quiet Pad Clips (Part No.13490Q)
from
$27.49
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied with the car
- Low-friction PTFE coating to reduce drag
- Maintains safe movement and effective stopping performance
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
- Stainless Steel Dual Coated
Carquest Wearever – Disc Brake Hardware Kit (Part No.13426A)
from
$16.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Helps deliver a quieter, more efficient braking system
- Low-friction PTFE coating to reduce drag
- Manufactured with quality materials to suppress high stress levels
ATE – Anti Rattle Spring / Clip (Part No.N1069100105ATE)
from
$12.21
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Akebono Euro – Ultra Premium Ceramic Brake Pads (Part No.EUR1307)
from
$64.99
Product Features:
See More
- Friction Formula Specifically Designed for a European Vehicle
- European Braking Performance with an Enhanced Pedal Feel
- Clean Wheels
- Ultra-Quiet: Definitive Control of Noise, Vibration and Harshness (NVH)
- Environmentally Friendly with Low Copper Content to Comply with CA and WA 2021 Restrictions
- Ultimate Upgrade for OE Semi-Metallic and Low Metallic Brake Pads
- Extremely Rotor-Friendly for Longer Rotor Life
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD1307)
from
$33.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Dorman – First Stop Disc Brake Caliper Repair Kit (Part No.N10501072202DOR)
from
$6.01
Dorman’s Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.
Product Features:
See More
Product Features:
- Replacement restores disc brakes to proper operation
- Replacement prevents uneven braking
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards
ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040381510ATE)
from
$185.40
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.
Product Features:
See More
Product Features:
- OE quality direct fit application.
- Friction Ready
- Corrosion inhibiting protection
- Ensures long life and maximum performance
- Natural exterior finish
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3774A)
from
$68.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B3775A)
from
$68.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040381511ATE)
from
$187.55
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.
Product Features:
See More
Product Features:
- OE quality direct fit application.
- Friction Ready
- Corrosion inhibiting protection
- Ensures long life and maximum performance
- Natural exterior finish
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Popular 2012 Land Rover Range Rover Evoque Brake Parts Categories
2012 Land Rover Range Rover Evoque Brake Parts
You count on your 2012 Land Rover Range Rover Evoque to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 44 Brake Parts ranging in price from $4.99 to $428.99, you’re sure to find everything you need for your 2012 Land Rover Range Rover Evoque.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 13 different brands like Carquest, Cardone, and Carquest Platinum Painted. 2012 Land Rover Range Rover Evoque Brake Parts start as low as $4.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 333 extensive product reviews on 2012 Land Rover Range Rover Evoque Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Pad Set – Gold Semi-Metallic with 4.1 stars and Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet with 4.0 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2012 Land Rover Range Rover Evoque below to get started!
Top-Rated Brake Parts Brands For Your 2012 Land Rover Range Rover Evoque
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Land Rover Range Rover Evoque running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Platinum Painted, and even more.
Popular Carquest Platinum Painted Brake Parts
You’ll find popular Carquest Platinum Painted brand products across Brake Rotors and Drums. All are waiting to get your 2012 Land Rover Range Rover Evoque back on the road. Some of the top-rated Carquest Platinum Painted products in these categories are:
from
$77.99
(1)
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
Front Brake Rotors
from
$64.99
(1)
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
Rear Brake Rotors
Top-Rated Carquest Wearever Brake Parts
If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 2012 Land Rover Range Rover Evoque, and some of our most reviewed Carquest Wearever parts include:
FAQs for 2012 Land Rover Range Rover Evoque Brake Parts
What are the most purchased Brake Parts for the 2012 Land Rover Range Rover Evoque?
Out of 44 Brake Parts for the 2012 Land Rover Range Rover Evoque, the most popular in our inventory are:
What are the top-rated 2012 Land Rover Range Rover Evoque Brake Parts?
Top-rated Brake Parts for your 2012 Land Rover Range Rover Evoque based on customer reviews/ratings are:
from
$55.99
(7)
Brake Pad Set – Gold Semi-Metallic
“The correct part at a reasonable price, all items i needed were in stock great job of social distancing in the store.”
from
$67.99
(6)
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
“Could not have been a better fit. No noise”
