from

$369.99

New Standard Replacement Front Lower Bumper Cover, Except Sx Model, Textured Finish

Product Features:

Excludes SX Model, Textured Finish, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Chrome Finish, for EX/LX Models. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome Finish, For EX/LX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$77.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Hetaed Glass, Textured, Base And LX Models. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

With Hetaed Glass, Textured, Base And LX Models, Convex Glass
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$3.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$99.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$4.99

New Standard Replacement Driver Side Front Bumper Cover Upper Side Support

Product Features:

Made Of Polyoxymethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$541.99

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

Lightweight Aluminum Powder Coated Frame
Full Length Protective Accent Trim
Slip Resistant Raised Rubber Grommets On The Step Area
NRT(TM) Powder Coated Steel Braces
No Drilling Required

from

$90.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black

from

$195.99

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
Functionality ensured – hoist appearance may vary slightly from original part but functions the same
Corrosion resistant – specially coated to prevent future rust and corrosion

from

$152.99

This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:

Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles
Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$32.99

This fuel filler door switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel filler door switch is made to match the fit and performance of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$679.99

New CAPA Certified Premium Replacement Hood Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector. It is Designed to Replace Your Existing Bmp Cover Reflector. Check To Be Sure it Fits Your Vehicle.

Product Features:

Excludes Sport Package, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$99.99

This door mirror switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door mirror switch is made to match the fit and performance of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$159.99

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
Easy Installation
Mount with 3M Tape

from

$53.99

New CAPA Certified Premium Replacement Front Bumper Impact Absorber

Product Features:

Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.99

New Standard Replacement Driver Side Outer Front Bumper Cover Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$103.99

Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$64.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$4.99

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$37.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Bumper Grille Front, Matte-Dark Gray. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Matte-Dark Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$64.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Front Bumper Cover Grille, Excludes SX Model, Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Excludes SX Model, Matte-Black, Made Of Thermoplastic Polyolefin
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$54.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Cover Grille, Excludes SX Model, Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Excludes SX Model, Matte-Black, Made Of Thermoplastic Polyolefin
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$177.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Front Bumper Cover Grille, Plastic, for Sport Model, Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Plastic, For Sport Model, Matte-Black, Made Of Olefinic Thermoplastic Elastomer
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

2012 Kia Sorento Body Parts

More 2012 Kia Sorento Body Parts Categories

Essential 2012 Kia Sorento Body Parts

KAI – Bumper Cover (Part No.KI1015105)

KAI – New Standard Replacement Grille, Chrome Finish, For EX/LX Models (Part No.KI1200140)

Atlas Lift – Lift Support (Part No.LS10405)

KAI – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.KI1321118)

Dorman – Anchor Clip-Hood Retainer – 12 mm Hole, 13 mm Stem, 26 mm Head (Part No.963-097D)

Dorman – Nylon Nut Head Dia 0.48×0.48In Shank Long 0.36In Hole Dia 0.32In (Part No.961-302)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-950)

Covercraft – Custom Hood Protector, Vinyl, Black (Part No.45681-01)

KAI – Bumper Cover Side Support (Part No.KI1042103)

Dee Zee – Powder Coated, With Black Trim, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16203)

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.75010K)

Dorman – Spare Tire Hoist Assembly (Part No.924-632)

Dorman – Power Window Switch – Master Switch (Part No.901-909)

Dorman – Fuel Door Release Switch (Part No.901-927)

KAI – Hood Panel (Part No.KI1230126PP)

KAI – New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector (Part No.KI1184102C)

Dorman – Power Mirror Switch – Front Left (Part No.901-910)

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM601)

KAI – Bumper Impact Absorber (Part No.KI1070131C)

KAI – Bumper Cover Bracket (Part No.KI1042104)

Dorman – Help – Non Heated Plastic Backed Mirror Right (Part No.56989)

Burco – Heated Side View Mirror Replacement (Part No.5421H)

Needa Parts – Body Fastener (Part No.465110B)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

KAI – New Standard Replacement Bumper Grille Front, Matte-Dark Gray (Part No.KI1036106)

KAI – New CAPA Certified Standard Replacement Front Bumper Cover Grille, Excludes SX Model, Matte-Black (Part No.KI1036115C)

KAI – New Standard Replacement Front Bumper Cover Grille, Excludes SX Model, Matte-Black (Part No.KI1036115)

KAI – New CAPA Certified Standard Replacement Front Bumper Cover Grille, Matte-Black (Part No.KI1036121C)

Popular 2012 Kia Sorento Body Parts Categories

2012 Kia Sorento Body Parts

Top-Rated Body Parts Brands For Your 2012 Kia Sorento

Popular Dorman Body Parts

Top-Rated Body Parts

FAQs for 2012 Kia Sorento Body Parts

What are the most purchased Body Parts for the 2012 Kia Sorento?