2012 Jeep Wrangler Universal Joints

Essential 2012 Jeep Wrangler Universal Joints

Crown Auto Jeep Replacmnt – Oem Replacement, Dana 44 Axle, 3.7 Inch Length (Part No.4797689)

Oem Replacement, Dana 44 Axle, 3.7 Inch Length

from

$82.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – OE Replacement, Dana 35 Axle, 2.98 Inch Overall Height, With Yoke Only (Part No.83503318)

OE Replacement, Dana 35 Axle, 2.98 Inch Overall Height, With Yoke Only

from

$65.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Omix – Drive Shaft Pinion Yoke (Part No.16580.02)

Drive Shaft Pinion Yoke

from

$94.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • 26 Spline
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Drive Shaft Pinion Yoke (Part No.16580.53)

Drive Shaft Pinion Yoke

from

$95.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • 26 Spline
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-542)

Differential Pinion Yoke Assembly

from

$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Crown Auto Jeep Replacmnt – Axle Yoke, U-Bolt Style, With Pinon Yoke Only, Rear, Dana 35 (Part No.4746835)

Axle Yoke, U-Bolt Style, With Pinon Yoke Only, Rear, Dana 35

from

$60.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

Yukon Gear – Replacement Pinion Flange For Non-Rubicon JK Front, Dana 30 (Part No.41123)

Replacement Pinion Flange For Non-Rubicon JK Front, Dana 30

from

$281.99
Yukon replacement pinion flange for non-Rubicon JK front, Dana 30. 24 spline with 8 bolt pattern, 2.620″ tall, 4.846″ seal diameter. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Jeep JK non-Rubicon front
  • 24 spline
  • 8 bolt holes
  • 2.620″ tall
See More

Omix – Drive Shaft Pinion Yoke (Part No.16580.23)

Drive Shaft Pinion Yoke

from

$69.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Incl. Yoke/Pinion Seal/U-bolt/Pinion Spacer/Pinion Nut
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange (Part No.D35YOKEUBK)

Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange

from

$80.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Convert assembly to strong u-bolt style
  • Designed to work with 3.219″ Wide U-Joints
  • Includes: Yoke, Pinion Seal, U-bolts, and pinion nut
  • Contains all hardware needed for installation
See More

Yukon Gear – Yoke For Model 35 With A 1310 U/Joint Size (Part No.41098)

Yoke For Model 35 With A 1310 U/Joint Size

from

$115.99
Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits AMC Model 35
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Driveworks – Universal Joint (Part No.DW-534G)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging to provide higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting allows for easy maintenance and the flexible use of the entire assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals are applied to optimize grease retention and reduce contamination
See More

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

1350 To Mechanics 3R Adaptor U/Joint

from

$111.99
Yukon 1350 to Mechanics 3R adaptor U/joint.
See More

Driveworks – Universal Joint (Part No.DW-371)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)

Non-Greaseable Super Strength Universal Joint

from

$24.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

1310 To 1330 Adapter U/Joint

from

$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More

Omix – Spicer U-Joint; 1410 (Part No.16525.10)

Spicer U-Joint; 1410

from

$74.99
Spicer U-Joint; 1410

Spicer – U Joint (Part No.K10102952636SPI)

U Joint

from

$116.74
U Joint

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

1310 To Mechanics 3R Adapter U/Joint

from

$109.99
Yukon 1310 to Mechanics 3R adapter U/Joint.
See More

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

1350 To 1410 Conversion U/Joint

from

$78.99
Yukon 1350 to 1410 conversion u/joint.
See More

Neapco – Universal Joint (Part No.1-0153)

Universal Joint

from

$4.49
Universal Joint
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Greaseable Super Strength Universal Joint

from

$34.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

1330 Lifetime U/Joint

from

$53.99
1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Neapco – Universal Joint (Part No.1-0297)

Universal Joint

from

$5.59
Universal Joint
See More

Neapco – Universal Joint (Part No.2-1569)

Universal Joint

from

$6.69
Universal Joint
See More

Yukon Gear – Chrome Moly Superjoints Replacement For Dana 30, Dana 44 & GM 8.5" (Part No.32082)

Chrome Moly Superjoints Replacement For Dana 30, Dana 44 & GM 8.5"

from

$609.99
(2) 297X 4340 Chrome Moly Super-joints. Replacement joints for Dana 30, Dana 44 & GM 8.5″ front.

Product Features:
  • Fits Dana Spicer 30 and 44 and GM 8.5″ front
  • 4340 Chromoly cross
  • Eliminated needle bearings results in larger trunion for added strength
  • Uses ultra high grade antiseize for lubrication
  • Not recommended for daily driven use
  • Two complete joints and eight full circle snap rings
See More

2012 Jeep Wrangler Universal Joints

Maybe you’re in the middle of a full rebuild of that 2012 Jeep Wrangler. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 24 different Universal Joints in our inventory ranging from $15.99 to $339.99. That means you can find the exact parts or products you need to keep that 2012 Jeep Wrangler running smoothly.

Universal Joints are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Jeep Wrangler. Moog, Spicer, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Universal Joints for your 2012 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 544 reviews in this category, some of the top rated parts include Universal Joint with 4.0 stars and Universal Joint with 5.0 stars.

So if you’re in the market for aftermarket Universal Joints to keep your 2012 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Universal Joints Brands To Make Your 2012 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Universal Joints brands and parts.

FAQs for 2012 Jeep Wrangler Universal Joints

What are the most purchased Universal Joints for the 2012 Jeep Wrangler?

Out of 24 Universal Joints for the 2012 Jeep Wrangler, the most popular in our inventory are:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints
Universal Joint
from $15.99
(10)
Universal Joint
U-Joints
Universal Joint
from $15.99
(6)
Universal Joint
U-Joints

What are the top-rated 2012 Jeep Wrangler Universal Joints?

Top-rated Universal Joints for your 2012 Jeep Wrangler based on customer reviews/ratings are:
Universal Joint
from $44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
Universal Joint
from $15.99
(1)
Universal Joint
“Exact fit and worked perfectly”
Oem Replacement
from $65.99
(1)
Oem Replacement
“This doesn’t fit my 2016 Jeep Wrangler Rubicon.”