2015 Jeep Wrangler Universal Joints
More 2015 Jeep Wrangler Universal Joints
Find your specific 2015 Jeep Wrangler original or aftermarket Universal Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2015 Jeep Wrangler Universal Joints
Omix – Drive Shaft Pinion Yoke (Part No.16580.53)
from
$95.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- 26 Spline
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – OE Replacement, Dana 35 Axle, 2.98 Inch Overall Height, With Yoke Only (Part No.83503318)
from
$65.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Crown Auto Jeep Replacmnt – Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange (Part No.D35YOKEUBK)
from
$80.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Convert assembly to strong u-bolt style
- Designed to work with 3.219″ Wide U-Joints
- Includes: Yoke, Pinion Seal, U-bolts, and pinion nut
- Contains all hardware needed for installation
Omix – Drive Shaft Pinion Yoke (Part No.16580.23)
from
$69.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Incl. Yoke/Pinion Seal/U-bolt/Pinion Spacer/Pinion Nut
- Direct Fit
- Limited 5 Year Warranty
Omix – Drive Shaft Pinion Yoke (Part No.16580.02)
from
$94.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- 26 Spline
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Yoke For Model 35 With A 1310 U/Joint Size (Part No.41098)
from
$115.99
Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits AMC Model 35
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Crown Auto Jeep Replacmnt – Axle Yoke, U-Bolt Style, With Pinon Yoke Only, Rear, Dana 35 (Part No.4746835)
from
$60.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Yukon Gear – Replacement Pinion Flange For Non-Rubicon JK Front, Dana 30 (Part No.41123)
from
$281.99
Yukon replacement pinion flange for non-Rubicon JK front, Dana 30. 24 spline with 8 bolt pattern, 2.620″ tall, 4.846″ seal diameter. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Jeep JK non-Rubicon front
- 24 spline
- 8 bolt holes
- 2.620″ tall
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Crown Auto Jeep Replacmnt – Oem Replacement, Dana 44 Axle, 3.7 Inch Length (Part No.4797689)
from
$82.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Spicer – Universal Joint (Part No.5-213X)
from
$39.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)
from
$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – Chrome Moly Superjoint Kit, Replacement For Dana 30, Dana 44 & GM 8.5" (Part No.32083)
from
$609.99
Yukon Chrome-Moly Super Joint kit for Dana 30, Dana 44 & GM 8.5″ front. Kit includes (2) 4340 Chrome Moly Super-joints, grease, and Gun.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44 and GM 8.5″ front
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- Two complete joints, eight full circle snap rings, grease and grease gun
Driveworks – Universal Joint (Part No.DW-371)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.489)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Omix – U-Joint (Part No.16525.07)
from
$216.99
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore. Omix-ADA offers high quality r
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Neapco – Universal Joint (Part No.2-4800)
Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)
from
$51.99
Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Crown Auto Jeep Replacmnt – Oem Replacement, 1.06 Inch Bearing Cap (Part No.J8136616)
from
$46.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Super Joint For GM 8.5", Dana 30 & Dana 44 – One Single Joint (Part No.32081)
from
$412.99
Yukon Super Joint for GM 8.5″, Dana 30 & Dana 44. One single joint.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44 and GM 8.5″ front
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- One complete joint and four full circle snap rings
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.365)
from
$25.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)
from
$26.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
Driveworks – Universal Joint (Part No.DW-365)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Popular 2015 Jeep Wrangler Universal Joints Categories
2015 Jeep Wrangler Universal Joints
Maybe you’re in the middle of a full rebuild of that 2015 Jeep Wrangler. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 17 different Universal Joints in our inventory ranging from $15.99 to $339.99. That means you can find the exact parts or products you need to keep that 2015 Jeep Wrangler running smoothly.
Universal Joints are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2015 Jeep Wrangler. Spicer, Moog, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Universal Joints for your 2015 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Universal Joints to keep your 2015 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Universal Joints Brands To Make Your 2015 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2015 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Universal Joints brands and parts.
Popular Driveworks Universal Joints
We carry Driveworks parts in our stock across U-Joints categories, plus more. For a 2015 Jeep Wrangler, our most popular Driveworks Universal Joints include:
Top 2015 Jeep Wrangler Universal Joints from Spicer
Spicer products are another trusted brand when it comes to Universal Joints for your 2015 Jeep Wrangler. Popular Spicer parts include:
FAQs for 2015 Jeep Wrangler Universal Joints
What are the most purchased Universal Joints for the 2015 Jeep Wrangler?
Out of 17 Universal Joints for the 2015 Jeep Wrangler, the most popular in our inventory are:
