2012 Jeep Wrangler Cooling and Climate Controls

Below you will find various in-demand Jeep Cooling and Climate Controls, components and accessories for your 2012 Wrangler. Advance Auto Parts has popular Wrangler parts like Blend Doors, Blower Motor and Related Products, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2012 Jeep Wrangler Cooling and Climate Controls below and start saving instantly.

Popular 2012 Jeep Wrangler Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Engine Coolant Thermostat Housing Caps

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

Engine Coolant Vent Screws

Heater Cores

Cabin Air Temperature Sensors

Coolant Reservoir Caps

Blower Motor Resistors

Radiator Supports

AC Condensers

Radiator Support Baffle Clips

AC Evaporators

Thermostat Housing Gaskets

Thermostat Housings

Thermostat Seals

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC Discharge Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

AC Compressor Cut-Off Switches

Radiator Support Brackets

AC Compressor Clutch Connectors

AC Refrigerant Pressure Sensors

Heater Core Temperature Sensors

Radiator Cap Adapters

Engine Coolant Outlet Crossover Gasket

Essential Cooling and Climate Controls for 2012 Jeep Wranglers

from

$9.49

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$149.99

New Economy Replacement Radiator Support

Product Features:

Made Of Polypropelene & Glass fiber & steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$111.99

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$5.29

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$46.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$497.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$32.49

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$541.99

BladeRunner Street Series Radiators feature a thicker tube and fin core, which provides greater heat dissipation and better coolant flow than the factory radiator for optimum cooling efficiency. With aircraft-grade aluminum construction and a larger core, BladeRunner Street Series Radiators offer increased coolant capacity over stock to help maintain cooler operating temperatures longer. The fabricated end tanks are constructed out of 1/8in aluminum plates for strength and durability. 100% TIG-welded for race proven strength and durability. BladeRunner Street Series Radiators include a brass drain valve with barbed fitting to easily connect a hose for draining coolant. Utilizes the factory mounting locations to provide stability for a hassle-free installation. Brushed aluminum finish with an aFe POWER logo painted on the front. aFe BladeRunner silicone radiator hose kits are available separately (2007-11 Jeep JK: 46-50004-B, 2012-18 Jeep JK: 46-50014-B).

Product Features:

1-9/16in thick core is 50% larger than the factory Jeep radiator
TIG-welded for long lasting strength and durability
Brushed aluminum finish
Includes a 1.3 bar radiator cap and heavy-duty brass drain valve

from

$105.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$75.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$63.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$80.99

New Platinum Pro A/C Condenser, Manual Transmissions Only

Product Features:

Manual Transmissions Only, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$287.99

RADIATOR/GRILLE SUPP

from

$1059.99

Is your air conditioning not blowing cold air like it used to? Have you been able to figure out which part failed? Omix-ADA offers most A/C replacement parts for Jeeps. Fix your Jeep and enjoy the cool breeze again.

Product Features:

OE Style
Direct Fit
Long-Lasting
High Output

from

$10.79

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications.
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$127.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$31.99

The ABS or Anti-Lock Brake System ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up and to help provide safer stopping. Reasons for replacement include: ABS/brake lamp illumination, no or erratic ABS operation or problems with stability and or traction control systems.

Product Features:

OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

from

$67.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$14.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$45.49

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$99.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$71.99

New Standard Replacement Heater Core

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$21.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit
Highly Durable
Long Lasting

from

$14.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$10.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

Upgrade your 2012 Jeep Wrangler with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 70 Cooling and Climate Controls for the 2012 Jeep Wrangler, designed to meet your needs without breaking the bank. From Blend Door replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2012 Jeep Wrangler at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $4.99 to $1,242.99, with an average price of $139.02. Our 70 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 2012 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Jeep Wrangler, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like FELPRO, Carquest Premium, Dorman, and more. FELPRO Cooling and Climate Controls start at just $10.79 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $6.79, and at an average 4.4 stars rating. With 2,964 customer reviews and counting, our 2012 Jeep Wrangler Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2012 Jeep Wrangler!

Best-Selling Blend Doors for 2012 Jeep Wranglers

Enhance the driving experience in your Jeep with 1 quality Blend Door components, starting at $32.49.

show more show less

from

$32.49

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Most Popular 2012 Jeep Wrangler Blower Motor and Related Products

Customize your Jeep with 6 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and Blower Motor Resistor Connectors, all priced under $110.99.

show more show less

from

$101.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$22.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
Featuring industrial grade materials for robust performance
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$104.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$110.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$43.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Top Picks for 2012 Jeep Wrangler Heating Parts

Upgrade Jeep Wranglers with top-quality Heating Parts parts, including 1 OEM and aftermarket selections for your 2012 model.

show more show less

from

$145.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

In-Demand Air Conditioning Parts for 2012 Jeep Wranglers

Select from 21 premium Air Conditioning Parts parts for your 2012 Jeep Wrangler, with prices ranging from $26.99 to $497.99.

show more show less

from

$52.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$154.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$26.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$31.99

OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

from

$497.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$63.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$66.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Rear
OE Style
Direct Fit
Limited 5 Year Warranty

from

$493.99

New Compressors are built in a ISO9001:2015 Certified facility. These facilities go through several audits to ensure quality standards in the manufacturing process.

Product Features:

New, with Clutch, with DKS17D Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
New Compressors meet or exceed OE specifications
New Compressors are validated for the equivalent of 100,000 miles
New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$360.99

An A/C Compressor pressurizes refrigerant before pumping it into the A/C condenser where the gas is then converted into a liquid that passes through the rest of the vehicle’s A/C system, which ultimately provides cold air to cool the cabin. The A/C compressor is the main power unit behind this entire process. When the A/C compressor fails or leaks, you no longer have the comfort of cool air. HL Mando offers OE factory A/C Compressors for Hyundai, Kia and Genesis, along with other domestic & European auto makers. A/C clutches are included on all brand new HL Mando OE conventional A/C compressors & comes pre-filled with refrigerant oil to exact factory specs. We also offer OE Hybrid & Electric Vehicle compressors as well – We Are OE!

Product Features:

Pre-filled oil in it with the correct amount of oil
Tested for Quality, Durability, and Reliability
Brand New OE- No Core Exchange Required
Direct Original Equipment Replacement

from

$405.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$94.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$37.99

New Standard Replacement A/C Receiver Drier, V6 Engine

Product Features:

V6 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$429.99

OE Style
Direct Fit
Helps Keep Temperature Comfortable
Regulates Air Speed

from

$346.99

As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

from

$338.99

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$178.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$105.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$82.99

New Platinum Pro A/C Condenser, 2.0/3.6 Liter Engines

Product Features:

2.0/3.6 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$75.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$43.99

New Standard Replacement A/C Expansion Valve, Front

Product Features:

Front
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$41.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

Most Sold 2012 Jeep Wrangler Engine Cooling Parts

Explore our best-selling Jeep parts for the 2012 Wrangler among 39 OEM and aftermarket options starting from $4.99.

show more show less

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$10.79

Meets or exceeds all original equipment specifications.
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$6.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$247.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$10.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$18.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$8.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$32.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$14.99

This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:

Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw
Durable materials – designed to withstand high cooling system temperatures and pressures
Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$5.29

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$8.99

On certain BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles, the original equipment engine coolant bleeder screw is made of plastic. Over time and during normal service, the head of the plastic screw deforms, becomes difficult to turn, and inevitably requires replacement. This Dorman OE FIX coolant air bleeder screw is made of brass to resist deforming during service, saving the expense of replacing the original screw with the same failure-prone plastic design.

Product Features:

Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles
Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse
Durable construction – made of quality brass for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$181.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$44.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$125.99

New Platinum Pro Radiator, 3.6 And 3.8 Liter Engines

Product Features:

3.6 And 3.8 Liter Engines, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$26.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$14.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$41.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$535.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

Top-Rated Cooling and Climate Controls Brands For Your 2012 Jeep Wrangler

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2012 Jeep Wranglers. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2012 Wrangler start at just $6.79 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2012 Jeep Wrangler Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Jeep Wrangler, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2012 Jeep Wrangler. With over 1 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.79. Plus, with over 2 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $10.79

(2)

Engine Coolant Thermostat Gasket

“Perfect fit for a 2011 Chrysler 200 with 6 cylinder”

Popular Carquest Premium 2012 Jeep Wrangler Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2012 Jeep Wrangler owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2012 Wrangler, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $6.79 to $145.99, plus, with more than 120 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $6.79

(118)

Radiator Cap: 18 PSI

“A+”

from $52.99

(1)

A/C Filter Drier with Pad Mount

“Works well. Should get the system sealed up and on a vacuum shortly after installing this. Do everything else first, install this last and start the v”

from $145.99

(1)

Heater Core

“Restored the driver side heat in my 2012 Jeep Wrangler”

FAQs for 2012 Jeep Wrangler Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2012 Jeep Wranglers?

Out of 70 Cooling and Climate Controls that fit 2012 Jeep Wranglers, the following parts are the top sellers:

HVAC Blend Door Actuator: 1 Piece (10619807) – $32.49
Radiator (99982452) – $247.99
Blower Motor: with Wheel (19010520) – $101.99

What’s the price range for 2012 Jeep Wrangler Cooling and Climate Controls?

Cooling and Climate Control prices for the 2012 Jeep Wrangler start at $4.99 and go up to $1,242.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2012 Jeep Wrangler?

The average price for Cooling and Climate Controls for the 2012 Jeep Wrangler is $139.02. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Jeep Wrangler model years?

Yes, we currently carry Cooling and Climate Controls for 36 model years of Jeep Wranglers between 1987 and 2025. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2012 Jeep Wrangler?

The cheapest 2012 Jeep Wrangler Cooling and Climate Controls we carry in stock are:

Fender Blind Rivet-Exterior-GM (10658371) – $4.99
Engine Coolant Thermostat Seal (10935251) – $5.29
Radiator Cap: 18 PSI (17110022) – $6.79
Radiator Drain Cocks (89015360) – $8.49
Brass Coolant Air Bleeder Screw (OE Fix) (12083347) – $8.99

What are the top-rated Cooling and Climate Controls that fit the 2012 Jeep Wrangler?

Out of 2,964 reviews by customers, our 2012 Jeep Wrangler Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2012 Jeep Wrangler and their top-rated products:

Engine Cooling Parts
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Engine Coolant Thermostat Gasket (11138667) – $10.79
- Radiator (99982452) – $247.99
Blower Motor and Related Products
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Engine Coolant Thermostat Gasket (11138667) – $10.79
- Radiator (99982452) – $247.99

What types of Cooling and Climate Controls do you sell for my 2012 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2012 Jeep Wrangler:

Can I get help with 2012 Jeep Wrangler Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Cooling and Climate Controls and more.

What is your return policy for Jeep Wrangler Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Jeep Wrangler Cooling and Climate Controls

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54207)

KAI – Radiator Support; Made Of Glass Fiber Reinforced PP Plastic (Part No.CH1225213V)

Dorman – Non Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-834)

MAHLE Original – Engine Coolant Thermostat Seal (Part No.C32590)

Carquest Premium – A/C Accumulator (Part No.T33570)

Carquest Premium – A/C New, with Clutch, with RS18 Compressor (Part No.T198305)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-029)

aFe POWER – High-Capacity Aluminum Radiator for Jeep JK (Part No.46-52001)

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2033)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1758)

Carquest Premium – A/C Block Expansion Valve (Part No.T39434)

KAI – A/C Condenser (Part No.CNDDPI3587)

Omix – RADIATOR/GRILLE SUPP (Part No.12040.10)

Omix – AC Compressor; 4.0L; 97-02 Jeep Wrangler TJ (Part No.17953.02)

Felpro – Engine Coolant Thermostat Gasket (Part No.35974)

Carquest Premium – Integrated Thermostat Housing: With Seal, 203 Degrees (Part No.49569)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54188)

NTK – ABS Wheel Speed Sensor (Part No.AB2080)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4111)

Felpro – Engine Coolant Outlet Gasket (Part No.36123)

Felpro – THERMOSTAT GASKET (Part No.35651)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2125)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

KAI – HVA/C Heater Core (Part No.HTR010072)

Omix – Thermostat Housing; 81-90 Jeep CJ/Wrangler YJ (Part No.17118.02)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-029)

Carquest Premium – Blower Motor: with Wheel (Part No.75817)

Carquest – HVAC Blower Motor Resistor Connector (Part No.PT1267)

Carquest Premium – Blower Motor: with Wheel (Part No.76934)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1354)

Carquest Premium – Multi-Use Connector (Part No.PTA2268)

Dorman – HVAC Blower Motor Resistor (Part No.984-123)

Carquest Premium – Heater Core (Part No.910518)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83376)

Carquest Premium – A/C Condenser (Part No.714239)

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

NTK – ABS Wheel Speed Sensor (Part No.AB2080)

Carquest Premium – A/C New, with Clutch, with RS18 Compressor (Part No.T198305)

Carquest Premium – A/C Block Expansion Valve (Part No.T39434)

Omix – ABS Wheel Speed Sensor (Part No.17259.07)

Carquest Premium – New York-Diesel Kiki-Zexel-Seltec DKS17D Compressor with Clutch (Part No.T98484)

MANDO – New AC Compressor Original Equipment (Pre-filled Oil) (Part No.10A1442)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor (Part No.DW97484)

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64057)

KAI – A/C Receiver Drier (Part No.ARD010132)

Omix – AC Condenser; 07-12 Jeep Wrangler JK (Part No.17950.12)

DENSO – A/C Compressor with Clutch – New (Part No.471-6077)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ RS18 Compressor (Part No.DW197305)

Carquest Premium – A/C Suction and Liquid Line Hose Assembly without Orifice Tube (Part No.T55898)

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2033)

KAI – A/C Condenser (Part No.CND4239)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1758)

KAI – A/C Expansion Valve (Part No.ACX010849)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55251)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Engine Coolant Thermostat Gasket (Part No.35974)

Carquest Premium – Radiator Cap: 18 PSI (Part No.10234)

Carquest Premium – Radiator (Part No.438146)

Carquest Premium – Radiator Cap: 18 PSI (Part No.10334)

Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees (Part No.724-203)

Dorman – Help – Radiator Drain Cocks (Part No.61134)

Carquest Premium – Integrated Thermostat Housing: With Seal, 203 Degrees (Part No.49569)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Dorman – Coolant Air Bleeder Screw (Part No.902-404)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

MAHLE Original – Engine Coolant Thermostat Seal (Part No.C32590)

Dorman – Brass Coolant Air Bleeder Screw (OE Fix) (Part No.902-404HP)

Carquest Premium – New Water Pump (Part No.T5160)

Dorman – Non-Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-773)

KAI – Radiator (Part No.RAD2957)

Felpro – Engine Water Pump Gasket (Part No.35982)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 203 Degrees (Part No.902-852)