2012 Jeep Grand Cherokee Performance and Racing Products
Find Your Specific 2012 Jeep Grand Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2012 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Performance Ignition Products, Programmers, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Cherokee model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2012 Jeep Grand Cherokee Performance and Racing Products below and start saving instantly.
Popular 2012 Jeep Grand Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 2012 Jeep Grand Cherokees
Omix – Ignition Coil; 98-02 Jeep Wrangler TJ (Part No.17247.05)
from
$45.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- External Coil
- OE Style
- Direct Fit
MSD Ignition – Coils; 5.7L HEMI; 03-05; 8-Pack (Part No.82568)
from
$732.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Direct Bolt-In
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- CARB Approved Legal For Use In All States
Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)
from
$78.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Uf-198
- MSD 8228
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$112.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1570)
from
$419.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9021)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (Part No.57-1549)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-13035D)
from
$414.99
Large Three Layer Performance Air Filter:_x000d_This 7″ tall 360-degree radial flow air filter features a 5″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Product Features:
See More
Product Features:
- +9 lbs. x ft. TQ & +10 HP
- Outflows Factory Intake by 42%
- Measured Flow: 525 CFM @ 7″ H2O
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 7 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12562)
from
$367.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 3 in. Dia. Mandrel Bent
- Hassle-Free Installation
- 1-Piece Heat Shield
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter (Part No.77-1560KTK)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$399.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
K&N – Cold Air Intake: Adds Up To 25 Horsepower, With Million Mile Air Filter (Part No.57-1506-2)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1555)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.77-1549KP)
from
$419.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.57-1526)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.57-1513-1)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Airaid – Cold Air Intake System with Limited Lifetime air filter. Guaranteed to increase Horsepower! (Part No.311-212)
from
$299.99
The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.
See More
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.77-1526KP)
from
$419.99
The K&N 77-1526KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Jeep Grand Cherokee models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The 77-1526KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that’s made to last and it accommodates a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (Part No.77-1563KP)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
Upgrade your 2012 Jeep Grand Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2012 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Performance and Racing Products for the 2012 Jeep Grand Cherokee, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Programmers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2012 Jeep Grand Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $17.99 to $1,324.99, with
an average price of $361.81.
Our 22 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 2012 Jeep Grand Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Jeep Grand Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N Spectre, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
With 797 customer reviews and counting, our 2012 Jeep Grand Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place.
Start shopping confidently below for your 2012 Jeep Grand Cherokee!
Best-Selling Performance Ignition Products for 2012 Jeep Grand Cherokees
Enhance the driving experience in your Jeep with 1 quality Performance Ignition Product components, starting at $112.99.
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$112.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
Most Popular 2012 Jeep Grand Cherokee Programmers
Customize your Jeep with 1 Programmers products
like Computer Chip Programmers, all
priced under $399.99.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$399.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Top Picks for 2012 Jeep Grand Cherokee Performance Air Intake Kits
Upgrade Jeep Grand Cherokees with top-quality Performance Air Intake Kits parts, including 19 OEM and aftermarket selections for your 2012 model.
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (Part No.63-1563)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9021)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (Part No.77-1563KP)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (Part No.57-1563)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter (Part No.77-1560KTK)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 27 Horsepower, With Million Mile Air Filter (Part No.77-1567KS)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9020)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
aFe POWER – Momentum GT Cold Air Intake: Gain up to 21 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76207)
from
$484.99
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing to the massive Pro DRY S air filter and premium hardware, we spared no expense to give you the best intake on the market.
Product Features:
See More
Product Features:
- Pro 5R Filter Media
- 5 Layer Progressive Cotton Gauze Media
- Washable And Reusable Air Filter
- 7 in. Tall 360 deg. Inverted Top Air Filter
aFe POWER – Black Series Cold Air Intake: Gain up to 35 Horsepower! Dry Air Filter For Easy Maintenance (Part No.58-10001D)
from
$1324.99
Massive Three Layer Performance Air Filter:This 8-1/2″ tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique Computer-Designed Carbon Fiber Housing:The simple yet elegant one-piece sealed housing features our patent-pending filter-to-housing interface, making installation a snap. The housing is made out of lightweight, high gloss, clear-coated twill weave carbon fiber.Dyno-Tuned Intake Tube:A lightweight high gloss twill weave carbon fiber tube directs filtered air from the air filter to the engine. It’s computer-designed and tested to increase air flow, while also reducing weight and enhancing the visual appearance of the engine bay.Premium Hardware:Premium stainless-steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability. Designed with fewer parts, this system’s installation is extremely simple and secure.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +35 HP and +31 Lbs. x Ft. TQ
- Outflows Factory Intake by 41%
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Race-Inspired Lightweight 100% Carbon Fiber Construction
Flowmaster Inc. – Air Intake (Part No.615182)
from
$523.99
Air Intake
aFe POWER – Momentum GT Cold Air Intake: Gain up to 35 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76206-1)
from
$484.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″ x 4-3/4″) oval flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- +35 HP / + 31 ft./lbs. Torque Max Gains
- Outflows Factory Intake By 31%
- High Quality 1-Piece Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
aFe POWER – Momentum GT Cold Air Intake: Gain up to 16 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76205-1)
from
$484.99
Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8″ tall 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Product Features:
See More
Product Features:
- Outflows Factory Intake By Up To 34%
- CAD-Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- Pro DRY S Oil-Free 3 Layer Synthetic Media
aFe POWER – Momentum GT Cold Air Intake: Gain up to 16 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-76205-1)
from
$469.99
Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8″ tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Product Features:
See More
Product Features:
- Outflows Factory Intake By 42%
- CAD Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- 5-Layer Progressive Cotton Gauze Media
aFe POWER – Momentum GT Cold Air Intake: Gain up to 35 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-76206-1)
from
$469.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″ x 4-3/4″) oval flange and is 9″ tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- + 35 HP / + 31 Lbs. x Ft. Torque Max Gains
- Outflows Factory Intake By 31%
- High Quality 1-Piece Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
K&N – NextGen Cold Air Intake: Adds Up To 34 Horsepower, With Washable Air Filter (Part No.50-1563)
from
$425.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee V8 5.7L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 45.3% to your engine and provides an increase of 34.03 horsepower and 23.83 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 19 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-13023R)
from
$403.99
Large Five Layer Performance Air Filter:This 7″ tall 360-degree radial flow air filter features a large 5″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing:The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicle’s OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Fitment Note:This item will NOT fit models equipped with the SRT hood.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +19 HP and +20 Lbs. x Ft. TQ
- Outflows Factory Intake by 56%
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.30-1563)
from
$367.99
The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Designed to improve throttle response and engine sound
- Replaces entire factory air intake system
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- K&N No-Hassle Limited Warranty
- Will not void vehicle warranty
Airaid – Cold Air Intake System with Limited Lifetime air filter. Guaranteed to increase Horsepower! (Part No.311-212)
from
$299.99
The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.
See More
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9039)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
In-Demand Performance Oil Filters for 2012 Jeep Grand Cherokees
Select from 1 premium Performance Oil Filters parts for your 2012 Jeep Grand Cherokee.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Top-Rated Performance and Racing Products Brands For Your 2012 Jeep Grand Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2012 Jeep Grand Cherokees. Below you’ll find some of our best rated Performance and Racing Products from K&N and Spectre, and more. Performance and Racing Products from these brands that fit a 2012 Grand Cherokee start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2012 Jeep Grand Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 2012 Jeep Grand Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2012 Jeep Grand Cherokee. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $286.32. Plus, with over 140 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(35)
Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter
“5 Star Review”
from
$472.99
(6)
Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter
“Installed a 77-1563KP on my 2011 Dodge Durango Citadel with Hemi. Has noticeable power increase and fuel mileage increase. Also the additional sound i”
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“Great product. Great service.”
Popular Spectre 2012 Jeep Grand Cherokee Performance and Racing Products
Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2012 Jeep Grand Cherokee owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2012 Grand Cherokee, Advance Auto Parts carries a full inventory of 1 Spectre Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Spectre Performance and Racing Products range up to $199.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$199.99
(1)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“Not installed yet but have ordered others”
FAQs for 2012 Jeep Grand Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2012 Jeep Grand Cherokees?
Out of 22 Performance and Racing Products that fit 2012 Jeep Grand Cherokees, the following parts are the top sellers:
- 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (99991313) – $399.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413085) – $199.99
- Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter (10202776) – $472.99
What’s the price range for 2012 Jeep Grand Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 2012 Jeep Grand Cherokee start at $17.99 and go up to $1,324.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2012 Jeep Grand Cherokee?
The average price for Performance and Racing Products for the 2012 Jeep Grand Cherokee is $361.81. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Grand Cherokee model years?
What are the cheapest Performance and Racing Products for my 2012 Jeep Grand Cherokee?
The cheapest 2012 Jeep Grand Cherokee Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99
- Coil; 5.7/6.1L HEMI; 05-14; Single (10211638) – $112.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413085) – $199.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413002) – $199.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (12153600) – $199.99
What are the top-rated Performance and Racing Products that fit the 2012 Jeep Grand Cherokee?
Out of 797 reviews by customers, our 2012 Jeep Grand Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2012 Jeep Grand Cherokee and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (10202774) – $367.99
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (11972052) – $367.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413002) – $199.99
- Performance Oil Filters
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (10202774) – $367.99
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (11972052) – $367.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413002) – $199.99
- Programmers
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (10202774) – $367.99
- Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (11972052) – $367.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413002) – $199.99
What types of Performance and Racing Products do you sell for my 2012 Jeep Grand Cherokee?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2012 Jeep Grand Cherokee:
Can I get help with 2012 Jeep Grand Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Grand Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
