2012 Jeep Grand Cherokee Performance and Racing Products
Find Your Specific 2012 Jeep Grand Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2012 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Performance Ignition Products, Performance Air Filters, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Cherokee model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2012 Jeep Grand Cherokee Performance and Racing Products below and start saving instantly.
Popular 2012 Jeep Grand Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 2012 Jeep Grand Cherokees
Dynomax – Dynomax Exhaust X Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 54777 (Part No.54777)
from
$269.99
Made from quality materials for durability, DynoMax direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
Diablosport – Diablosport 2 EX In-Cabin Tuners, 9400 (Part No.9400)
from
$749.99
With its brilliant five-inch high-resolution touchscreen, customizable gauge layouts, and intuitive swipe functionality, the T2 makes performance tuning and real-time monitoring simple. Preloaded dyno-tested tunes provide reliable power gains for daily driving, towing, or off-road use, all while maintaining 50-state emissions compliance thanks to its CARB Executive Order certification. Built-in data logging and diagnostic tools ensure you can track performance and maintain your Jeep at peak capability.
See More
SCT Performance – SCT Performance X4 Performance Programmer, 7215 (Part No.7215)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
See More
Hypertech – Hypertech Speedometer Calibrator Color: Recalibrate Your Speedometer To Account For Changes To Tire Size, 3300 (Part No.3300)
from
$239.99
The Speedometer Calibrator recalibrates speedometer readings when non-stock tire sizes and/or rear gear ratios are installed.
See More
Dynomax – Dynomax Exhaust Bolt Two Nuts, Two Flat Washers, Two 7/16-in. x 2.5-in. Hex-Head Grade 5 Bolts, 36426 (Part No.36426)
from
$14.79
Complete your exhaust repair with a DynoMax bolt kit. Designed to ensure a tight connection and inhibit leaks, DynoMax hardware is manufactured from durable and robust material for long service life.
See More
Competition Cams – Competition Cams Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 273-360, 20-670-4 (Part No.20-670-4)
from
$426.99
Competition Cams Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 273-360, 20-670-4.
See More
Competition Cams – "Competition Cams Hi-Tech .080"" Wall Pushrod Set for ’09+ Dodge 5.7/6.4L HEMI, 8721-16" (Part No.8721-16)
from
$203.99
“COMP Cams HEMI pushrod sets are a continuation of the Hi-Tech Pushrod line. These pushrods sets are engineered to provide optimal preload for specific late-model HEMI applications when using performance camshafts. Like all COMP Cams Hi-Tech Pushrods, these are a one-piece construction from .080″” wall chromemoly tubing and are cryo-treated for extended durability. In addition, they feature precision formed and reinforced ball type ends, and the whole pushrod is black oxide finished and laser etched. COMP Cams Hi-Tech Pushrod Sets are available for the 2003-08 5.7L, 2005-10 6.1L and 2009-Current 5.7L/6.4L HEMI applications.”
See More
Competition Cams – Competition Cams Xfi 208/212 Hydraulic Roller Cam For Dodge 5.7/6.1L Hemi, 112-500-11 (Part No.112-500-11)
from
$608.99
Slight noticeable idle, slight tuning modifications, excellent torque throughout range. Needs programmer.
See More
Disc Brakes Australia – Disc Brakes Australia T3 4000 Series, DBA42532S (Part No.DBA42532S)
Disc Brakes Australia – Disc Brakes Australia T3 4000 Series Rotor, DBA42633S (Part No.DBA42633S)
Disc Brakes Australia – Disc Brakes Australia T3 4000 Series, DBA4888S (Part No.DBA4888S)
Dynomax – Dynomax Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet2.5 Inch Outlet OD, 52499 (Part No.52499)
from
$138.99
“Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for “”Pure Unadulterated Power”” – include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.”
See More
Holley EFI – Holley EFI Gen III Hemi Hi-Ram EFI Manifold, 300-650BK (Part No.300-650BK)
from
$1449.99
The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
See More
K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2457 (Part No.33-2457)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
See More
aFe POWER – aFe POWER Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow, 54-13035D (Part No.54-13035D)
from
$399.99
“Large Three Layer Performance Air Filter:This 7″” tall 360-degree radial flow air filter features a 5″” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.”
See More
aFe POWER – aFe POWER Track Series Stage-2 Carbon Fiber Intake System with Pro 5R Media, 57-10014R (Part No.57-10014R)
from
$773.99
“This 7″” tall 360-degree radial flow air filter features a 6-1/8″” x 4-1/8″” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Multiple air inlets bring in cool air when under power. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility.”
See More
K&N – K&N Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter, 63-1593 (Part No.63-1593)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
Spectre – Spectre Cold Air Intake Kit Engineered to Add Horsepower & Torque, 9020 (Part No.9020)
from
$219.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
See More
aFe POWER – aFe POWER Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow, 54-13023D (Part No.54-13023D)
from
$399.99
“Large Three Layer Performance Air Filter:This 7″” tall 360-degree radial flow air filter features a large 5″” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing:The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicle’s OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Fitment Note:This item will NOT fit models equipped with the SRT hood.”
See More
aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 16 Horsepower! Oiled Air Filter For Maximum Airflow, 54-76205-1 (Part No.54-76205-1)
from
$451.99
“Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8″” tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.”
See More
K&N – K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 57-1526 (Part No.57-1526)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
Accel – Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual – This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep… (Part No.140021)
from
$84.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
See More
MSD Ignition – MSD Ignition Ignition Coils, 5.7L / 6.1L Hemi, 2005-2014, 8-Pack, 82558 (Part No.82558)
from
$599.99
Bring the fire-power to your HEMI. The MSD Blaster gen III HEMI coil is a direct bolt-in and spec’d with superior materials and winding ratios to improve the output of the coil while retaining factory fitment. For over 50 years, MSD has unapologetically delivered industry leading ignition performance. Upgrade your HEMI ignition coils with the same MSD name the pros use and rely on in the most extreme motorsport environments. This MSD Blaster HEMI Coil fits 5.7L, 6.1L, 6.2L and 6.4L HEMI engines, and is available in red or black.
See More
Upgrade your 2012 Jeep Grand Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2012 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Performance and Racing Products for the 2012 Jeep Grand Cherokee, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Air Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2012 Jeep Grand Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $14.79 to $1,449.99, with
an average price of $421.36.
Our 22 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 2012 Jeep Grand Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Jeep Grand Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N MSD Ignition, and more.
K&N Performance and Racing Products
start at just $68.99 and boast an impressive 4.8 stars average rating from customers.
With 866 customer reviews and counting, our 2012 Jeep Grand Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place.
Start shopping confidently below for your 2012 Jeep Grand Cherokee!
Best-Selling Performance Ignition Products for 2012 Jeep Grand Cherokees
Enhance the driving experience in your Jeep with 1 quality Performance Ignition Product components, starting at $599.99.
MSD Ignition – MSD Ignition Ignition Coils, 5.7L / 6.1L Hemi, 2005-2014, 8-Pack, 82558 (Part No.82558)
from
$599.99
Bring the fire-power to your HEMI. The MSD Blaster gen III HEMI coil is a direct bolt-in and spec’d with superior materials and winding ratios to improve the output of the coil while retaining factory fitment. For over 50 years, MSD has unapologetically delivered industry leading ignition performance. Upgrade your HEMI ignition coils with the same MSD name the pros use and rely on in the most extreme motorsport environments. This MSD Blaster HEMI Coil fits 5.7L, 6.1L, 6.2L and 6.4L HEMI engines, and is available in red or black.
See More
Most Popular 2012 Jeep Grand Cherokee Performance Air Filters
Customize your Jeep with 1 Performance Air Filters products
like Performance Air Filters, all
priced under $68.99.
K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2457 (Part No.33-2457)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
See More
Top Picks for 2012 Jeep Grand Cherokee Performance Air Intake Kits
Upgrade Jeep Grand Cherokees with top-quality Performance Air Intake Kits parts, including 11 OEM and aftermarket selections for your 2012 model.
K&N – K&N Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter, 77-1560KTK (Part No.77-1560KTK)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
Spectre – Spectre Cold Air Intake Kit Engineered to Add Horsepower & Torque, 9020 (Part No.9020)
from
$219.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
See More
aFe POWER – aFe POWER Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow, 54-13023D (Part No.54-13023D)
from
$399.99
“Large Three Layer Performance Air Filter:This 7″” tall 360-degree radial flow air filter features a large 5″” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing:The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicle’s OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Fitment Note:This item will NOT fit models equipped with the SRT hood.”
See More
aFe POWER – aFe POWER Track Series Stage-2 Carbon Fiber Intake System with Pro 5R Media, 57-10014R (Part No.57-10014R)
from
$773.99
“This 7″” tall 360-degree radial flow air filter features a 6-1/8″” x 4-1/8″” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Multiple air inlets bring in cool air when under power. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility.”
See More
Flowmaster Inc. – Flowmaster Inc. Performance Air Intake – Delta Force – 11-18 Durango/Grand Cherokee 5.7L, 615182 (Part No.615182)
from
$549.99
Take the performance of your vehicle to the next level with the addition of Flowmaster’s new Delta Force Performance Air Intake system for 2011-2026 Dodge Durango and 2011-2021 Jeep Grand Cherokee with a 5.7L engine. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware. Other features include a large diameter high-flow conical shaped 8 layer cotton gauze air filter, which traps more dirt than typical 6 layer designs, a custom-fit black powder-coated air dam with attachment brackets to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with our new Delta Force cleaning kits which will help your filter to outlast your vehicle. For maximum performance and that iconic Flowmaster exhaust tone, we highly recommend pairing your new Delta Force Performance Air Intake with a Flowmaster exhaust system or muffler.
See More
aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 35 Horsepower! Dry Air Filter For Easy Maintenance, 51-76206-1 (Part No.51-76206-1)
from
$462.99
“Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″” x 4-3/4″”) oval flange and is 9″” tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.”
See More
aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 21 Horsepower! Oiled Air Filter For Maximum Airflow, 54-76207 (Part No.54-76207)
from
$451.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
See More
aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 16 Horsepower! Oiled Air Filter For Maximum Airflow, 54-76205-1 (Part No.54-76205-1)
from
$451.99
“Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8″” tall 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.”
See More
K&N – K&N NextGen Cold Air Intake: Adds Up To 34 Horsepower, With Washable Air Filter, 50-1563 (Part No.50-1563)
from
$425.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee V8 5.7L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 45.3% to your engine and provides an increase of 34.03 horsepower and 23.83 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
aFe POWER – aFe POWER Magnum FORCE Stage-2 Cold Air Intake System with Pro 5R Media, 54-13063R (Part No.54-13063R)
from
$387.99
“This 7″” tall 360-degree radial flow air filter features a 6-1/8″” x 4-1/8″” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Multiple air inlets bring in cool air when under power. The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility.”
See More
Spectre – Spectre Cold Air Intake Kit Engineered to Add Horsepower & Torque, 9039 (Part No.9039)
from
$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
See More
In-Demand Performance Exhaust Products for 2012 Jeep Grand Cherokees
Select from 3 premium Performance Exhaust Products parts for your 2012 Jeep Grand Cherokee, with prices ranging from $14.79 to $269.99.
Dynomax – Dynomax Exhaust X Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 54777 (Part No.54777)
from
$269.99
Made from quality materials for durability, DynoMax direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
Dynomax – Dynomax Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet2.5 Inch Outlet OD, 52499 (Part No.52499)
from
$138.99
“Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for “”Pure Unadulterated Power”” – include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.”
See More
Dynomax – Dynomax Exhaust Bolt Two Nuts, Two Flat Washers, Two 7/16-in. x 2.5-in. Hex-Head Grade 5 Bolts, 36426 (Part No.36426)
from
$14.79
Complete your exhaust repair with a DynoMax bolt kit. Designed to ensure a tight connection and inhibit leaks, DynoMax hardware is manufactured from durable and robust material for long service life.
See More
Most Sold 2012 Jeep Grand Cherokee Performance Engines
Explore our best-selling Jeep parts for the 2012 Grand Cherokee among 2 OEM and aftermarket options starting from $203.99.
Holley EFI – Holley EFI Gen III Hemi Hi-Ram EFI Manifold, 300-650BK (Part No.300-650BK)
from
$1449.99
The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
See More
Competition Cams – "Competition Cams Hi-Tech .080"" Wall Pushrod Set for ’09+ Dodge 5.7/6.4L HEMI, 8721-16" (Part No.8721-16)
from
$203.99
“COMP Cams HEMI pushrod sets are a continuation of the Hi-Tech Pushrod line. These pushrods sets are engineered to provide optimal preload for specific late-model HEMI applications when using performance camshafts. Like all COMP Cams Hi-Tech Pushrods, these are a one-piece construction from .080″” wall chromemoly tubing and are cryo-treated for extended durability. In addition, they feature precision formed and reinforced ball type ends, and the whole pushrod is black oxide finished and laser etched. COMP Cams Hi-Tech Pushrod Sets are available for the 2003-08 5.7L, 2005-10 6.1L and 2009-Current 5.7L/6.4L HEMI applications.”
See More
Top-Rated Performance and Racing Products Brands For Your 2012 Jeep Grand Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2012 Jeep Grand Cherokees. Below you’ll find some of our best rated Performance and Racing Products from K&N and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 2012 Grand Cherokee start at just $68.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2012 Jeep Grand Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 2012 Jeep Grand Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2012 Jeep Grand Cherokee. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $68.99, with an average price of just $270.99. Plus, with over 108 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$68.99
(85)
K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2457
“5 Star Review”
from
$422.99
(23)
K&N Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter, 77-1560KTK
“I just installed this (77-1560KTK) Cold-Air Intake Kit on my 2011 Jeep Grand Cherokee with the new 3.6L Pentastar engine and immediately noticed an im”
Popular MSD Ignition 2012 Jeep Grand Cherokee Performance and Racing Products
MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2012 Jeep Grand Cherokee owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 2012 Grand Cherokee, Advance Auto Parts carries a full inventory of 1 MSD Ignition Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range up to $599.99, plus, with more than 1 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$599.99
(1)
MSD Ignition Ignition Coils, 5.7L / 6.1L Hemi, 2005-2014, 8-Pack, 82558
“Installed the MSD Blaster coils on a 2007 Jeep Grand Cherokee 5.7 Hemi. Installed easily, and I saw an instantly significant increase in power, and s”
FAQs for 2012 Jeep Grand Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2012 Jeep Grand Cherokees?
Out of 22 Performance and Racing Products that fit 2012 Jeep Grand Cherokees, the following parts are the top sellers:
- Spectre Cold Air Intake Kit Engineered to Add Horsepower & Torque, 9020 (11413085) – $219.99
- SCT Performance X4 Performance Programmer, 7215 (11844152) – $399.99
- Dynomax Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet2.5 Inch Outlet OD, 52499 (11693838) – $138.99
What’s the price range for 2012 Jeep Grand Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 2012 Jeep Grand Cherokee start at $14.79 and go up to $1,449.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2012 Jeep Grand Cherokee?
The average price for Performance and Racing Products for the 2012 Jeep Grand Cherokee is $421.36. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Grand Cherokee model years?
What are the cheapest Performance and Racing Products for my 2012 Jeep Grand Cherokee?
The cheapest 2012 Jeep Grand Cherokee Performance and Racing Products we carry in stock are:
- Dynomax Exhaust Bolt Two Nuts, Two Flat Washers, Two 7/16-in. x 2.5-in. Hex-Head Grade 5 Bolts, 36426 (10206078) – $14.79
- K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2457 (10173072) – $68.99
- Dynomax Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet2.5 Inch Outlet OD, 52499 (11693838) – $138.99
- "Competition Cams Hi-Tech .080"" Wall Pushrod Set for ’09+ Dodge 5.7/6.4L HEMI, 8721-16" (50286832) – $203.99
- Spectre Cold Air Intake Kit Engineered to Add Horsepower & Torque, 9039 (12153600) – $208.99
What are the top-rated Performance and Racing Products that fit the 2012 Jeep Grand Cherokee?
Out of 866 reviews by customers, our 2012 Jeep Grand Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2012 Jeep Grand Cherokee and their top-rated products:
- Programmers
- Performance Air Filters
- Performance Air Intake Kits
What types of Performance and Racing Products do you sell for my 2012 Jeep Grand Cherokee?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 2012 Jeep Grand Cherokee:
Can I get help with 2012 Jeep Grand Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Grand Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
