2012 Ford Transit Connect Serpentine and V Belts

Essential 2012 Ford Transit Connect Serpentine and V Belts

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Drive V-Belt

from

$28.75
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.5060870)

Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count

from

$52.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Serpentine Belt (Part No.W100050252DAY)

Poly Rib Serpentine Belt

from

$50.39
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999823A)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$116.99
This Litens Serpentine Belt Drive Component Kit fits 2007-2013 Ford Focus, Transit Connect w/2.0L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • All-in-one solution to get the whole job done right the first time
  • Eliminate the guess-work by repairing the whole system.
  • Front end accessory drive components wear together. Replace all of the components for added piece of mind.
  • A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
  • Worn tensioners and idlers can cut belt life in half.
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Motorcraft – SERPENTINE BELT (Part No.JK4-361-A)

SERPENTINE BELT

from

$32.99
SERPENTINE BELT

Gates – Micro-V« Serpentine Drive Belt (Part No.K060874)

Micro-V« Serpentine Drive Belt

from

$60.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.613K6)

Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count

from

$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required

from

$30.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Dayco – Stretch Serpentine Belt; 36.46 Long, 4 Rib Count, Zip Tie Required (Part No.4PK926EE)

Stretch Serpentine Belt; 36.46 Long, 4 Rib Count, Zip Tie Required

from

$23.99
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Dayco – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.5060613)

Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count

from

$36.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K040355SF)

Stretch Fit« Micro-V« Serpentine Drive Belt

from

$30.49
Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:
  • Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
See More

Dayco – Poly Rib Belt Serpentine Belt; 53.54 Long, 4 Rib Count (Part No.5040535)

Poly Rib Belt Serpentine Belt; 53.54 Long, 4 Rib Count

from

$37.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Stretch Serpentine Belt; 35.35 Long, 4 Rib Count, Zip Tie Required (Part No.4PK898EE)

Stretch Serpentine Belt; 35.35 Long, 4 Rib Count, Zip Tie Required

from

$16.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Driveworks – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.870K6)

Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count

from

$49.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060612)

Micro-V« Serpentine Drive Belt

from

$36.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count (Part No.A060875)

Aramid Cord Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count

from

$86.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:
  • Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
  • Length stability resists excessive span vibrations or tensioner movements
  • Features special compounds that resist cracking and perform well under intense engine temperatures 
See More

2012 Ford Transit Connect Serpentine and V Belts

Maybe you’re in the middle of a full rebuild of that 2012 Ford Transit Connect. Maybe you just need a couple of Serpentine and V Belts. Either way, Advance Auto Parts has 7 different Serpentine and V Belts in our inventory ranging from $29.99 to $116.99. That means you can find the exact parts or products you need to keep that 2012 Ford Transit Connect running smoothly.

Serpentine and V Belts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Ford Transit Connect. Dayco, Driveworks, and Litens are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Serpentine and V Belts for your 2012 Ford Transit Connect, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Serpentine and V Belts to keep your 2012 Ford Transit Connect rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Serpentine and V Belts Brands To Make Your 2012 Ford Transit Connect Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Ford Transit Connect demands trusted brand parts and products to keep it running. Many trusted brands of Serpentine and V Belts make up Advance Auto Parts’ inventory, and all are ready to help make your Transit Connect the best it can be. Be sure to browse some of our top Serpentine and V Belts brands and parts.

FAQs for 2012 Ford Transit Connect Serpentine and V Belts

What are the most purchased Serpentine and V Belts for the 2012 Ford Transit Connect?

Out of 7 Serpentine and V Belts for the 2012 Ford Transit Connect, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count
from $49.49
(38)
Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count
Serpentine Belts
Aramid Cord Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from $86.99
This product is not rated
Aramid Cord Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
Serpentine Belts
Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys
from $116.99
This product is not rated
Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys
Serpentine Belt Drive Component Kits