2012 Ford Taurus Engine Timing Parts

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

• Direct replacement – this VVT sprocket fits and performs like the original sprocket
• Durable construction – made from durable steel and precision machined for reliable performance
• 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
• Quality assured – vehicle-specific application has been validation tested to ensure quality

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

• High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
• Precision machined sprockets for exact timing
• High-grade plastic guides use same material as OE for excellent wear resistance
• Contains: Camshaft Sprocket (2), Crankshaft Sprocket, Timing Chain (3), Chain Tensioner (3), Tensioner Guide, Chain Guide (3); Does Not Contain Variable Valve Timing (VVT) Sprocket

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
• Hydraulic

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4228 Engine Timing Chain (2 EA), 9-5686 Engine Timing Chain Tensioner (2 EA), 9-5687 Engine Timing Chain Guide (1 EA), 9-5688 Engine Timing Chain Guide (1 EA), 9-5689 Engine Timing Chain Tensioner (1 EA), 9-5690 Engine Timing Chain Guide (2 EA), 9-5691 Engine Timing Chain Guide (1 EA), 9-5697 Engine Timing Chain Tensioner Guide (1 EA), C738F Engine Timing Chain (1 EA), S995 Engine Timing Crankshaft Sprocket (1 EA), VC116 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VC117 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VTS116 Engine Variable Valve Timing (VVT) Solenoid (2 EA), VTS117 Engine Variable Valve Timing (VVT) Solenoid (2 EA), WP102 Engine Water Pump (1 EA).

Product Features:

• Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
• Utilizes the latest in design and technology to offer a complete chain kit solution
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• CAD designed and manufactured using premium materials
• Refer to our online catalog for detailed application-specific information

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S976T Engine Timing Camshaft Sprocket (2 EA), 9-5663 Engine Timing Chain Guide (1 EA), WP103 Engine Water Pump (1 EA), 9-4226 Engine Timing Chain (1 EA), 9-4227 Engine Timing Chain (2 EA), 9-5660 Engine Timing Chain Guide (1 EA), 9-5661 Engine Timing Chain Tensioner Guide (1 EA), S977 Engine Timing Crankshaft Sprocket (1 EA), 9-5658 Engine Timing Chain Tensioner (1 EA), 9-5659 Engine Timing Chain Tensioner (1 EA), 9-5662 Engine Timing Chain Guide (1 EA), 9-5664 Engine Timing Chain Tensioner (1 EA).

Product Features:

• Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
• Utilizes the latest in design and technology to offer a complete chain kit solution
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• CAD designed and manufactured using premium materials
• Refer to our online catalog for detailed application-specific information

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

• High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
• Precision machined sprockets for exact timing
• High-grade plastic guides use same material as OE for excellent wear resistance
• Contains: Crankshaft Sprocket, Timing Chain (3), Chain Guide (5), Chain Tensioner (3), Tensioner Guide, Water Pump Does Not Contain Variable Valve Timing (VVT) Sprocket

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
• CAD designed and manufactured using premium materials
• Refer to our online catalog for detailed application-specific information
• Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
• Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
• Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
• Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
• Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Along with the timing chain, tensioners, And guides, sprockets are an integral component within the timing system. Cloyes timing gears And sprockets are available as part of complete timing kits as well as for individual purchase And installation. Featuring helical tooth form for quiet operation, And precision-machined bore for true fit, Cloyes Timing Sprockets offer reliability And dependability for engine rebuilds And typical replacement jobs. Cloyes parts are CAD designed And manufactured using advanced materials. Each part is extensively tested for function And durability to ensure optimal performance. Cloyes recommends the chain tensioner(s), sprocket(s), And guide(s) also be replaced when the chain is replaced as these components play a vital role in supporting the chain And keeping it tight. Refer to our online catalog for detailed application-specific information.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Along with the timing chain, tensioners, And guides, sprockets are an integral component within the timing system. Cloyes timing gears And sprockets are available as part of complete timing kits as well as for individual purchase And installation. Featuring helical tooth form for quiet operation, And precision-machined bore for true fit, Cloyes Timing Sprockets offer reliability And dependability for engine rebuilds And typical replacement jobs. Cloyes parts are CAD designed And manufactured using advanced materials. Each part is extensively tested for function And durability to ensure optimal performance. Cloyes recommends the chain tensioner(s), sprocket(s), And guide(s) also be replaced when the chain is replaced as these components play a vital role in supporting the chain And keeping it tight. Refer to our online catalog for detailed application-specific information.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

• Extensively tested and measured for function, fitment, and durability to ensure optimal performance
• CAD designed and manufactured using premium materials
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• Refer to our online catalog for detailed application-specific information

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Refer to our online catalog for detailed application-specific information

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Designed to meet or exceed OEM performance requirements
• Refer to our online catalog for detailed application-specific information

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.