2012 Ford Mustang Vehicle Hoods

Keep Your 2012 Ford Mustang in Top Shape with Quality Vehicle Hoods

Whether you’re repairing or upgrading your Vehicle Hood, using high-quality parts is key to keeping your 2012 Ford Mustang looking sharp and performing at its best. At Advance Auto Parts we carry a wide selection of dependable options, including Cowl Panel Retainers, Hood Panels, and Lift Supports. Whether you’re replacing a damaged part or enhancing your truck’s style and protection, you’ll find exactly what you need to get the job done right.

Competitive Prices and Extensive Inventory

The average price for a 2012 Ford Mustang Vehicle Hood at Advance Auto Parts is around $119.41, with a range that starts at $1.99 and goes up to $1,120.00. With 6 options in stock from 3 trusted brands, finding the right fit is easy. Popular picks like Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk, Hood Hinge, and Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk start at just $13.99 and offer a great balance of form and function.

Explore Related Parts

While you’re upgrading or replacing your Vehicle Hood, don’t forget to check out other key components like Vehicle Grilles and Vehicle Windows. At Advance Auto Parts, we’re here to help you keep your 2012 Ford Mustang in peak condition, inside and out.

Essential 2012 Ford Mustang Vehicle Hoods

KAI – Hood Hinge (Part No.GMK302121067R)

Hood Hinge

from

$68.99
New Goodmark Passenger Side Hood Hinge Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK302121067L)

Hood Hinge

from

$68.99
New Goodmark Driver Side Hood Hinge Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK302321071L)

Hood Hinge

from

$77.99
New Goodmark Driver Side Hood Hinge Without Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK302321071R)

Hood Hinge

from

$77.99
New Goodmark Passenger Side Hood Hinge Without Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.FO1236128)

Hood Hinge

from

$13.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.FO1236127)

Hood Hinge

from

$13.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Trunk Lift Support: 19.1" Ext Length, 7.55" Travel, 39 Lbs of Force, 1 Pk (Part No.D4643)

Trunk Lift Support: 19.1" Ext Length, 7.55" Travel, 39 Lbs of Force, 1 Pk

from

$18.49
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

StrongArm – Trunk Lift Support: 12.56" Ext Length, 0 Travel, 0 Lbs of Force, 1 Pk (Part No.E7129)

Trunk Lift Support: 12.56" Ext Length, 0 Travel, 0 Lbs of Force, 1 Pk

from

$31.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

StrongArm – Tailgate Lift Support: 19.7" Ext Length, 7.95" Travel, 130 Lbs of Force, 1 Pk (Part No.D4408)

Tailgate Lift Support: 19.7" Ext Length, 7.95" Travel, 130 Lbs of Force, 1 Pk

from

$27.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

KAI – Deck Lid (Part No.GMK3022700692)

Deck Lid

from

$276.99
New Goodmark Trunk Lid, For Fastback Models

Product Features:
  • For Fastback Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk (Part No.E6408)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk

from

$23.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk (Part No.E6457)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk

from

$42.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

StrongArm – Liftgate Lift Support: 19.65" Ext Length, 8.0" Travel, 140 Lbs of Force, 1 Pk (Part No.D4686)

Liftgate Lift Support: 19.65" Ext Length, 8.0" Travel, 140 Lbs of Force, 1 Pk

from

$25.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

KAI – Hood Panel (Part No.FO1230290)

Hood Panel

from

$1120.00
New Standard Replacement Hood Panel, Made Of Aluminum, Fits Base/Gt Models

Product Features:
  • Made Of Aluminum, Fits Base/Gt Models, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Panel (Part No.GMK3020200641)

Hood Panel

from

$709.99
New Goodmark Hood Panel, Except Shelby

Product Features:
  • Except Shelby
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (sold by each) (Part No.700-552)

Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (sold by each)

from

$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Most Popular Cowl Panel Retainer for 2012 Ford Mustangs

Enhance your 2012 Ford Mustang with this popular Cowl Panel Retainer we have in stock, for $1.99.

Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (sold by each) (Part No.700-552)

Rivet-Screw In-Hole Diameter .250 In-Head Diameter 1 In-Length .900 In (sold by each)

from

$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Best-Selling 2012 Ford Mustang Hood Panel

Upgrade your Mustang with our best-selling Hood Panel.

KAI – Hood Panel (Part No.FO1230290)

Hood Panel

from

$1120.00
New Standard Replacement Hood Panel, Made Of Aluminum, Fits Base/Gt Models

Product Features:
  • Made Of Aluminum, Fits Base/Gt Models, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Top-Quality Lift Supports for 2012 Ford Mustangs

Choose a high-quality OEM or aftermarket Lift Support for Ford Mustangs and enjoy top-notch performance from $23.79.

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk (Part No.E6408)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk

from

$23.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk (Part No.E6457)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk

from

$42.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Top Picks for 2012 Ford Mustang Hood Hinges

Invest in one of our 2 durable Hood Hinges for your 2012 Ford, knowing you’re getting trusted brands and expert craftsmanship.

KAI – Hood Hinge (Part No.FO1236128)

Hood Hinge

from

$13.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.FO1236127)

Hood Hinge

from

$13.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

FAQs for 2012 Ford Mustang Vehicle Hoods

What are the best-selling Vehicle Hoods for 2012 Ford Mustangs?

Out of 6 Vehicle Hoods that fit 2012 Ford Mustangs, the following parts are the top sellers:

What’s the price range for 2012 Ford Mustang Vehicle Hoods?

The prices of Vehicle Hoods for the 2012 Ford Mustang range from $1.99 up to $1,120.00 for the most premium parts.

What is the average price of a Vehicle Hood for a 2012 Ford Mustang?

The average price for Vehicle Hoods for the 2012 Ford Mustang is $119.41. Keep in mind the variety of part types within our Vehicle Hood category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Vehicle Hoods for other Ford Mustang model years?

Yes, we carry Vehicle Hoods for 53 model years of Ford Mustangs between 1964 and 2023. The following model years are the most popular for Vehicle Hood purchases: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2011.

What are the cheapest Vehicle Hoods for my 2012 Ford Mustang?

The cheapest 2012 Ford Mustang Vehicle Hoods we carry are:

Does Advance Auto Parts sell Vehicle Hoods for any other 2012 Ford models?

Yes. We stock Vehicle Hoods for 18 other popular 2012 Ford models. Some of the most popular are 2012 F-150 Vehicle Hoods, 2012 Explorer Vehicle Hoods, 2012 F-250 Super Duty Vehicle Hoods, 2012 F-350 Super Duty Vehicle Hoods, and 2012 Taurus Vehicle Hoods.

What types of Vehicle Hoods do you sell for my 2012 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Vehicle Hoods for a 2012 Ford Mustang:

Can I get help with 2012 Ford Mustang Vehicle Hood orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Ford Vehicle Hoods and more.

What is your return policy for Ford Mustang Vehicle Hoods?

Advance Auto Parts keeps returns simple. For new Ford Mustang Vehicle Hoods and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.