2012 Ford F-350 Super Duty Differentials

Essential 2012 Ford F-350 Super Duty Differentials

Yukon Gear – 10.25" Tracloc (Ford Case) Paper/Composite Lined Clutch Set (Part No.16011)

10.25" Tracloc (Ford Case) Paper/Composite Lined Clutch Set

from

$258.99
10.25″ TracLoc (Ford case) Paper/Composite Lined clutch set, positraction.

Product Features:
  • Clutch kit
  • Fit Ford 10.25″ Trac Loc positraction without clutch guides
See More

Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)

Differential Carrier Bearing Kit - Timken

from

$93.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • CARRIER BEARING KIT FRD 10.5″ W/TIM
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 70, 4.10 & Down (Part No.20045)

Replacement Standard Open Carrier Case For Dana 70, 4.10 & Down

from

$352.99
Yukon replacement standard open carrier case for Dana 70, 4.10 & down (incl ABS).

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 70
  • 4.41 and down ratio only
  • Does not include spider gears
See More

National – Bearings (Part No.NP516549)

Bearings

from

$128.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Pro-King – Crush Sleeve (Part No.716B034)

Crush Sleeve

from

$7.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Replacement Carrier Shim Kit For Dana 70 & 70HD

from

$126.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Ppinion Nut 7/8-20 Thread, 1 1/8 Socket

from

$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:
  • Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
  • 7/8″ x 20 thread
  • 1 1/8″ socket
See More

Dorman – Rear Axle Shafts (Part No.630-615)

Rear Axle Shafts

from

$261.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Ring Gear Bolt For Ford 10.25" & 10.5"

from

$6.99
Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:
  • Ring gear bolt for Ford 10.25″ and 10.5″
  • 1/2″ x 20 thread
See More

Motive Gear – Differential Gear Install Kit (Part No.F10.5IK)

Differential Gear Install Kit

from

$67.99
Product Features:
  • MINI INSTALL KIT – FORD 10.5″
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Pinion Gear Thruster Washer For 10.25" Ford (Part No.33294)

Pinion Gear Thruster Washer For 10.25" Ford

from

$9.99
Pinion gear thruster washer for 10.25″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 10.25″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Differential Pinion (Part No.13112)

Differential Pinion

from

$373.99
Differential Pinion

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

aFe POWER – Differential Cover (Part No.46-70082)

Differential Cover

from

$381.99
aFe Powers new front-end differential cover brings performance engineering to the protection of your trucks front-end. This differential cover has a 3-1/2 quart lube capacity at the factory fluid level line, a magnetic drain plug and a magnetic fill plug to remove unwanted debris. Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. aFe has also designed a large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and style. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • External Fins Transfer Heat To Atmosphere
  • Calibration Plug
  • Fill Plug w/Magnet At End Of Extended Stick
  • Magnetic Drain Plug
See More

Yukon Gear – Trac Lok Positraction Internals For Dana 80 And With 35 Spline Axles (Part No.16094)

Trac Lok Positraction Internals For Dana 80 And With 35 Spline Axles

from

$1049.99
Yukon Trac Lok positraction internals for Dana 80 and with 35 spline axles. Uses round design cross pin. (Not for Dana 60 or 70). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. Dana 80 Trac Lok spider gears, 35spline (” round” design cross pin, NOT Dana 60 or NOT Dana 70 ).

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 80 Powr Lok positraction with 35 spline axles
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With Fine Spline Axles And A 7290 U/Joint Size (Part No.41032)

Replacement Yoke For Dana 60 And 70 With Fine Spline Axles And A 7290 U/Joint Size

from

$205.99
Yukon replacement yoke for Dana 60 and 70 with fine spline axles and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 7290 u-joint size
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Differential Pinion Shim Kit

from

$16.99


Product Features:
  • PINION SHIM-DANA 30,35.50
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

2012 Ford F-350 Super Duty Differentials

Maybe you’re in the middle of a full rebuild of that 2012 Ford F-350 Super Duty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 324 different Differentials in our inventory ranging from $2.99 to $3,524.99. That means you can find the exact parts or products you need to keep that 2012 Ford F-350 Super Duty running smoothly.

Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Ford F-350 Super Duty. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2012 Ford F-350 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,208 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Multi Purpose Seal with 2.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 2012 Ford F-350 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2012 Ford F-350 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Ford F-350 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 Super Duty the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 2012 Ford F-350 Super Duty, our most popular Felpro Differentials include:
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $9.49
(26)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 2012 Ford F-350 Super Duty Differentials

What are the most purchased Differentials for the 2012 Ford F-350 Super Duty?

Out of 324 Differentials for the 2012 Ford F-350 Super Duty, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2012 Ford F-350 Super Duty Differentials?

Top-rated Differentials for your 2012 Ford F-350 Super Duty based on customer reviews/ratings are:
Bearings
from $23.99
(7)
Bearings
“Good price”
Multi Purpose Seal
from $30.99
(4)
Multi Purpose Seal
“quality”
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
“Worked great on my 1981 Chevy C20”