2012 Ford F-150 Belts and Hoses

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 22863
Price: 29.99 USD

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 2012 F-150. Advance Auto Parts has popular F-150 parts like Radiator Hoses, Heater Hoses, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other F-150 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2012 Ford F-150 Belts and Hoses below and start saving instantly.

Popular 2012 Ford F-150 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Radiator Overflow Hoses

Heater Hose Fittings

Fuel Hoses

Engine Oil Cooler Hoses

HVAC Heater Pipe Lines

Seal Pullers

V-Belts

Drive Belt Idler Assemblies

Engine Coolant Hose Connector Seals

Essential Belts and Hoses for 2012 Ford F-150s

from

$29.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$5.49

Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$32.49

Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$47.99

Spectra Premium filler neck hoses are engineered, developed and validated by our in-house team of Canadian engineers ensuring it meets or exceeds the OE specifications.

Product Features:

Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
OE design to ensure exact fit, form and function
Fit tested to ensure ease of installation for the application it was intended for
Part is tested to ensure it meets the same requirements as OE specifications
Compatible with all fuel types it’s designed for
Includes necessary clamps for a complete installation solution

from

$2.79

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$17.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$27.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$28.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for increased leak resistance
Their great flexibility makes installation easy
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$30.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$51.99

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$35.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.49

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

PULLEY

from

$43.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$96.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$53.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$63.99

This replacement coolant overflow hose is engineered to match the fit and function of the original equipment overflow hose assembly. Manufactured from quality materials to withstand extreme temperature changes for a long service life.

Product Features:

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$65.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This Litens aftermarket product meets all original equipment form, fit, and function specifications for this General Motors tensioner. (*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) The Litens aftermarket part has a black-coated pulley bolt versus the silver bolt used on the OE part. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$61.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$46.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$1.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time
Similar to SAE 20R3 Class D-3
Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.

from

$114.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety.
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair

from

$146.99

This Litens Serpentine Belt Drive Component Kit fits 2002-2005 Ford E-450, Excursion, F-150, F-350 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$173.99

This Litens Serpentine Belt Drive Component Kit fits 2005-2014 Ford Expedition, Explorer, F-150, F-250, F-350 / Mercury Mountaineer / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time!
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
Worn tensioners and idlers can cut belt life in half.

Upgrade your 2012 Ford F-150 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2012 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Belts and Hoses for the 2012 Ford F-150, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2012 Ford F-150 at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $2,459.99, with an average price of $103.59. Our 73 Belts and Hoses in stock come from 11 trusted brands, so you’re sure to find the right part for your 2012 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Ford F-150, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, Dorman, and more. Litens Belts and Hoses start at just $95.99 and boast an impressive 4.7 stars average rating from customers. Dayco and Dorman also bring quality to the table, with Belts and Hoses available starting at $13.99, and at an average 4.5 stars rating. With 8,021 customer reviews and counting, our 2012 Ford F-150 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2012 Ford F-150!

Best-Selling Radiator Hoses for 2012 Ford F-150s

Enhance the driving experience in your Ford with 10 quality Radiator Hose components, starting at $1.79.

show more show less

from

$89.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$2.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$85.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum Y-connector for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$1.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time
Similar to SAE 20R3 Class D-3
Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.

from

$144.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$167.99

RADIATR COOLANT HOSE

from

$151.99

RADIATR COOLANT HOSE

from

$136.99

RADIATOR COOLANT HOS

from

$95.99

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$78.99

This radiator coolant hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radiator coolant hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2012 Ford F-150 Heater Hoses

Customize your Ford with 16 Heater Hoses products like Heater Hoses, Heater Hose Fittings, and HVAC Heater Pipe Lines, all priced under $140.99.

show more show less

from

$83.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$129.99

Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$13.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$15.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$27.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$35.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.99

This HVAC heater hose retainer clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this HVAC heater hose retainer clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$140.99

HVAC HTR HOSE ASMBLY

from

$128.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C) and the ¿quick connect end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1.
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement

from

$108.99

HVAC HTR HOSE ASMBLY

from

$83.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$52.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$46.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$32.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$26.99

Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

Top Picks for 2012 Ford F-150 Belt Tensioners

Upgrade Ford F-150s with top-quality Belt Tensioners parts, including 11 OEM and aftermarket selections for your 2012 model.

show more show less

from

$121.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Made in the USA

from

$95.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Ford / Lincoln applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$159.99

Litens was the Original Equipment (O.E.) supplier of this popular Ford F-Series/Super-Duty tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner design include a heavy-duty steel pulley and a molded lift-feature on the arm to assist with belt removal and installation. As with the Litens Original Equipment tensioner, this replacement tensioner is produced in Canada. Designed for the 6.2L DOHC “Boss V-8” engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in under 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$105.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Ford / Lincoln 5.0L applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$112.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Includes installation instructions

from

$109.99

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$127.99

DRIVE BELT TENSIONER

from

$159.99

DRIVE BELT TENSIONER

from

$301.99

DRIVE BELT TENSIONER

from

$89.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$84.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Serpentine and V Belts for 2012 Ford F-150s

Select from 21 premium Serpentine and V Belts parts for your 2012 Ford F-150, with prices ranging from $15.79 to $2,459.99.

show more show less

from

$32.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$33.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$18.79

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$28.49

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$43.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$15.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$24.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$25.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$37.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides maximum performance at extreme, extended operating temperatures
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
Troubleshooting designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$30.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$34.99

SERPENTINE BELT

from

$61.99

SERPENTINE BELT

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$46.99

Patented material provides peak performance at prolonged extreme operating temperatures
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$41.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$37.49

SERPENTINE BELT

from

$2459.99

SUPERCHARGER COMPONE

from

$114.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety.
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair

from

$34.49

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications.
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$32.49

PULLEY

Most Sold 2012 Ford F-150 Pulleys

Explore our best-selling Ford parts for the 2012 F-150 among 8 OEM and aftermarket options starting from $13.79.

show more show less

from

$30.49

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$29.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$13.79

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$56.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$62.99

This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including the Mack LE Series. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$28.99

Litens Automotive is the original equipment (O.E.) supplier of this idler pulley assembly for a wide range of Ford F-Series and Super-Duty applications with a 6.2L gas engine (Boss V-8). The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to the same exacting specifications as the O.E. part. Like the original part, this pulley is manufactured of heavy duty steel for maximum life and performance. There have been numerous Technical Service Bulletins (TSB) issued on pulleys produced by other manufacturers. Note: This drive uses two of these pulleys for belt routing. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.
76.5mm O.D.; 17mm I.D.; 31.5mm width for a rib serpentine belt, Smooth running surface, steel construction.

from

$66.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in severe conditions

from

$56.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

Top-Rated Belts and Hoses Brands For Your 2012 Ford F-150

Shop for the best-rated brands offering Belts and Hoses and other products for your 2012 Ford F-150s. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Dorman, and more. Belts and Hoses from these brands that fit a 2012 F-150 start at just $13.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2012 Ford F-150 Belts and Hoses

When it comes to maintaining or upgrading your 2012 Ford F-150, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2012 Ford F-150. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99, with an average price of just $120.66. Plus, with over 3 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $159.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Good”

from $95.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Worked great on my 2011 mustang.”

from $105.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Easy fit and finish oem replacement”

Popular Dayco 2012 Ford F-150 Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2012 Ford F-150 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2012 F-150, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dayco Belts and Hoses range from $32.99 to $121.99, plus, with more than 11 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $121.99

(2)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

“so far so good”

from $89.99

(4)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.44" Diameter

“Part was completely correct in every way , was an easy swap out . Thanks Advance Auto Parts”

from $32.99

(5)

Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count

“OEM top of the line serpentine belt, what can I say? Perform like the original. Good price with using coupon.”

FAQs for 2012 Ford F-150 Belts and Hoses

Which Belts and Hoses are best-sellers for 2012 Ford F-150s?

Out of 73 Belts and Hoses that fit 2012 Ford F-150s, the following parts are the top sellers:

Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (22149402) – $13.99
Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (99983003) – $32.99
Engine Heater Hose Assembly (OE Fix) (11880630) – $85.99

What’s the price range for 2012 Ford F-150 Belts and Hoses?

Belts and Hose prices for the 2012 Ford F-150 start at $1.79 and go up to $2,459.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2012 Ford F-150?

The average price for Belts and Hoses for the 2012 Ford F-150 is $103.59. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford F-150 model years?

Yes, we currently carry Belts and Hoses for 31 model years of Ford F-150s between 1977 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2012 Ford F-150?

The cheapest 2012 Ford F-150 Belts and Hoses we carry in stock are:

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (10504876) – $1.79
Multi-Purpose O-Ring (20688830) – $2.79
Idler Pulley (Pulley only) (10040938) – $13.79
Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (22149402) – $13.99
Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (10062406) – $15.79

What are the top-rated Belts and Hoses that fit the 2012 Ford F-150?

Out of 8,021 reviews by customers, our 2012 Ford F-150 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2012 Ford F-150 and their top-rated products:

Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.44" Diameter (11094051) – $89.99
- Multi-Purpose O-Ring (20688830) – $2.79
Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.44" Diameter (11094051) – $89.99
- Multi-Purpose O-Ring (20688830) – $2.79
Belt Tensioners
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.44" Diameter (11094051) – $89.99
- Multi-Purpose O-Ring (20688830) – $2.79

What types of Belts and Hoses do you sell for my 2012 Ford F-150?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2012 Ford F-150:

Can I get help with 2012 Ford F-150 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford F-150 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford F-150 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Ford F-150 Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.22863)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Driveworks – Automotive V-Belt, Driveworks (Part No.41013)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Spectra Premium – Fuel Filler Hose (Part No.FNH009)

Felpro – Multi-Purpose O-Ring (Part No.35759)

Dorman – Heater Hose Connector (Part No.800-404)

Dorman – Molded Heater Hose: Stainless Steel (Part No.626-644)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25474)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Idler Pulley, Dayco (Part No.89007)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900007A)

Dorman – Engine Heater Hose Assembly (Part No.626-597)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dayco – Idler Pulley, Dayco (Part No.89053)

Dayco – PULLEY (Part No.89852)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.75" Diameter (Part No.D71038)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.50" Diameter (Part No.E72640)

Driveworks – V-Ribbed Belt, Driveworks (Part No.460K4)

Dayco – Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (Part No.5061025)

Dorman – Engine Heater Hose Assembly (Part No.626-675)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999266A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89237)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.87661)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Dayco – Serpentine Belt Kit With Belt, Tensioner, 2-Piece Set (Part No.5060550K1)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544C)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544H)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.44" Diameter (Part No.E72730)

Felpro – Multi-Purpose O-Ring (Part No.35759)

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-541)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter (Part No.E72841)

Motorcraft – RADIATR COOLANT HOSE (Part No.KM-5078)

Motorcraft – RADIATR COOLANT HOSE (Part No.KM-5114)

Motorcraft – RADIATOR COOLANT HOS (Part No.KM-5076)

Rein – Radiator Hose (Part No.CHR0764)

Dorman – Engine Heater Hose Assembly (Part No.626-772)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, .75" Diameter (Part No.E72728)

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-620)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Dorman – Heater Hose Connector (Part No.800-411)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix) (Part No.800-409HP)

Dorman – Engine Heater Hose Assembly (Part No.626-597)

Dorman – Engine Coolant Hose Clip (Part No.800-807)

Dorman – Engine Heater Hose Assembly (Part No.626-542)

Motorcraft – HVAC HTR HOSE ASMBLY (Part No.KH-576)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 46 1/2 Inch Length (Part No.88501)

Motorcraft – HVAC HTR HOSE ASMBLY (Part No.KH-570)

Dorman – Engine Heater Hose Assembly (Part No.626-721)

Dorman – Engine Heater Hose Assembly (Part No.626-718)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.2" Long, .75" Diameter (Part No.E72729)

Dorman – Molded Heater Hose: Rubber (Part No.626-659)

Rein – Heater Hose (Part No.CHH0789)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89631)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999461A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999947A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999830A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89698)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999831A)

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-118)

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-103)

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-137)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89655)

Dorman – Automatic Belt Tensioner (Part No.419-378)

Dayco – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.5060550)

Dayco – Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (Part No.5060640)

Dayco – Poly Rib Belt Serpentine Belt; 53.54 Long, 6 Rib Count (Part No.5060535)

Driveworks – Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (Part No.640K6)

Dayco – Ela Poly Rib Belt (Part No.E040359)

Dayco – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.5061055)

Driveworks – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.550K6)

Driveworks – Poly Rib Belt Serpentine Belt; 53.54 Long, 6 Rib Count (Part No.535K6)

Dayco – Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (Part No.4PK932EE)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060547HD)

Driveworks – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.1055K6)

Motorcraft – SERPENTINE BELT (Part No.JK6-553)

Motorcraft – SERPENTINE BELT (Part No.JK6-645)

Yukon Gear – Seal Puller Tool (Part No.56063)