2012 Chevrolet Camaro Power Steering Parts

Essential 2012 Chevrolet Camaro Power Steering Parts

Maval – Complete Steering Rack, Remanufactured (Part No.M1000402209MAV)

Complete Steering Rack, Remanufactured

from

$283.59
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Cardone – Rack and Pinion Assembly (Part No.22-1107)

Rack and Pinion Assembly

from

$385.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.22-185)

Rack and Pinion Assembly

from

$288.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Dorman – Power Steering Fluid Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-850)

Power Steering Fluid Reservoir: Black, Plastic, Original Equipment Replacement

from

$67.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
  • Complete assembly – includes reservoir and reservoir cap
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Taper Bearing Cone

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – Air Bag Connector (Part No.PTA2152)

Air Bag Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed for the OE distributor as a direct replacement part
See More

Whiteline – Steering Rack And Pinion Mount Bushing (Part No.W13149)

Steering Rack And Pinion Mount Bushing

from

$34.99
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tyres have all put radically increased loading on the steering systems of modern cars. Add to that engine bay contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Rare Parts – Steering Gear Frame Bushing (Part No.RP17218)

Steering Gear Frame Bushing

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Insulates Rack & Pinion from Frame.
  • Stabilizes Rack & Pinion
See More

Driveworks – Rack & Pinion Bushings (Part No.DW-K6349B)

Rack & Pinion Bushings

from

$10.49
Rack & Pinion Bushings

Cardone – P/S Pump (Part No.M2010917523CAR)

P/S Pump

from

$215.68
Cardone Power Steering Pumps are hydraulically tested for proper flow, seal, pressure and output, ensuring like-new performance. The critical components are tested three times, heat, chemical and mechanical bonds keep the high-carbon steel sleeve firmly in place, ensuring exceptional performance. They feature 100 percent computerized and hydraulic testing or proper flow, pressure, leakage and performance.

Product Features:
  • 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function
  • All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability
  • All units are built with 100% new seals and o-rings
  • Units are supplied with 100% tested and calibrated pressure relief valves
  • Shafts are 100% processed to ensure surface finish is within O.E. tolerances
See More

Lares – Remanufactured Power Steering Pump (Part No.2032)

Remanufactured Power Steering Pump

from

$137.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Cardone – Power Steering Pump (Part No.20-6886)

Power Steering Pump

from

$82.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Lares – Remanufactured Power Steering Pump (Part No.2237)

Remanufactured Power Steering Pump

from

$111.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Power Steering Oil Cooler Heavy Duty

from

$36.99
3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Heavy-duty power steering oil cooler
  • Size: 3/4″ x 5″ x 9-1/4″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Carquest Premium – Pressure Hose Assembly (Part No.35264)

Pressure Hose Assembly

from

$53.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.34803)

Pressure Hose Assembly

from

$38.99
Power steering end fittings follow OE design to ensure easy installation. Available in various sizes and angles for most repairs.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35263)

Pressure Hose Assembly

from

$61.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35932)

Pressure Hose Assembly

from

$43.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35363)

Pressure Hose Assembly

from

$36.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

2012 Chevrolet Camaro Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 2012 Chevrolet Camaro. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 19 different Power Steering Parts in our inventory ranging from $10.29 to $385.99. That means you can find the exact parts or products you need to keep that 2012 Chevrolet Camaro running smoothly.

Power Steering Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Chevrolet Camaro. Imperial, Driveworks, and Cardone are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 2012 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,290 reviews in this category, some of the top rated parts include Transmission Oil Cooler Replacement Hose with 3.0 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 2012 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 2012 Chevrolet Camaro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Cardone Power Steering Parts

We carry Cardone parts in our stock across Power Steering Filters categories, plus more. For a 2012 Chevrolet Camaro, our most popular Cardone Power Steering Parts include:
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

FAQs for 2012 Chevrolet Camaro Power Steering Parts

What are the most purchased Power Steering Parts for the 2012 Chevrolet Camaro?

Out of 19 Power Steering Parts for the 2012 Chevrolet Camaro, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(70)
Taper Bearing Set
Pinion Bearings
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters
Power Steering Oil Cooler Medium Duty
from $36.49
This product is not rated
Power Steering Oil Cooler Medium Duty
Power Steering Coolers

What are the top-rated 2012 Chevrolet Camaro Power Steering Parts?

Top-rated Power Steering Parts for your 2012 Chevrolet Camaro based on customer reviews/ratings are:
Transmission Oil Cooler Replacement Hose
from $14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses. 11/32″ is an odd size hose. Th”