2012 Cadillac Escalade ESV Cooling and Climate Controls

Name: Standard Thermostat: With Seal, 187 Degrees
Brand: Carquest Premium
SKU: 15158
Price: 34.99 USD
Rating: 4.0 (45 reviews)

Below you will find various in-demand Cadillac Cooling and Climate Controls, components and accessories for your 2012 Escalade ESV. Advance Auto Parts has popular Escalade ESV parts like Heating Parts, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Escalade ESV model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2012 Cadillac Escalade ESV Cooling and Climate Controls below and start saving instantly.

Popular 2012 Cadillac Escalade ESV Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

AC Replacement Kits

Radiator Caps

AC Compressor Without Clutch

Thermostats

ABS Control Relays

Radiator Fan Motors

Engine Coolant Air Bleed Pipes

AC Refrigerant Hose Fitting

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

AC Evaporator Anti-Ice Sensors

Heater Cores

Cabin Air Temperature Sensors

Heater Blend Doors

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Engine Water Pump Gasket Kits

AC Harness Connectors

Air Conditioning Relays

AC Condensers

Radiator Fan Control Relays

AC Compressor Cut-Out Relays

Water Pump Install. Kits

AC Evaporators

AC Caps and Valve Core Kits

AC Clutch Coil Connectors

Accumulator and Receiver Driers

ABS Speed Sensors

AC O-Ring and Gasket Kits

AC Discharge Lines

AC Suction Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Cut-Off Switches

Coolant Fan Motor Connectors

AC Switch Connectors

AC Condenser Screw

AC Compressor Clutch Connectors

AC Refrigerant Pressure Sensors

AC Service Valve Caps

AC Condenser Fan Switch Harness Connectors

Radiator Cap Adapters

Engine Coolant Water Inlet Seals

HVAC Pressure Transducers

A/C Expansion Valve Filter

AC Low Pressure Side Switches

AC Hose Bolt

AC Compressor Water Valve Solenoid Connectors

Essential Cooling and Climate Controls for 2012 Cadillac Escalade ESVs

from

$34.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$18.99

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$57.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$85.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$93.99

This replacement engine coolant pipe assembly is designed to match the fit and function of the original assembly on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this replacement engine coolant pipe assembly is designed to match the fit and function of the original assembly on specified makes, years and models
Restores functionality – reliable replacement for an original part that is leaking, cracked or failed from corrosion and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

GM Genuine Parts Engine Coolant Thermostat Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help close and prevent coolant from leaking out of your vehicle’s cooling system components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps close and prevent coolant from leaking out of your vehicle’s cooling system components to maintain the proper engine temperature
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$83.99

ACDelco GM Original Equipment HVAC Mode Door Actuators are electric motors attached to the HVAC housing that move or actuate the mode doors or flaps, directing the airflow to the desired outlet vents. These original equipment HVAC mode door actuators are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Corrects mode door malfunction caused by a failed actuator
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$41.99

Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:

Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$23.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$5.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$299.99

Reach Radiators offer one of the largest product ranges in the aftermarket, covering more than 95% of the popular automotive and light truck applications. Reach Radiators meet or exceed original equipment specifications, ensuring that products fit and perform just as well or better than the original parts, providing you peace of mind.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$20.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
100% leak tested
Direct-fit replacement for ease of installation

from

$64.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$29.99

ACDelco GM Original Equipment A/C Orifice Tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. This original equipment orifice tube is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restore A/C performance due to restricted orifice tubes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$8.49

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$349.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$22.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$336.39

Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final packaging of fan assembly

from

$52.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$99.99

ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restores ABS function and performance caused by failed wheel speed sensor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured with GM Original Equipment specification for fit, form, and function

from

$9.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$32.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$38.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$11.49

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$196.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$30.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 2012 Cadillac Escalade ESV with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Cadillac Escalade ESV, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Escalade ESV functioning at its best. At Advance Auto Parts, we offer a wide selection of 126 Cooling and Climate Controls for the 2012 Cadillac Escalade ESV, designed to meet your needs without breaking the bank. From Heating Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2012 Cadillac Escalade ESV at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $436.99, with an average price of $81.94. Our 126 Cooling and Climate Controls in stock come from 14 trusted brands, so you’re sure to find the right part for your 2012 Cadillac Escalade ESV without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Cadillac Escalade ESV, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like GM Genuine, Carquest Premium, Dorman, and more. GM Genuine Cooling and Climate Controls start at just $7.49 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4.4 stars rating. With 3,088 customer reviews and counting, our 2012 Cadillac Escalade ESV Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Cadillac Escalade ESV is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade ESV in top shape, all in one place. Start shopping confidently below for your 2012 Cadillac Escalade ESV!

Best-Selling Heating Parts for 2012 Cadillac Escalade ESVs

Enhance the driving experience in your Cadillac with 4 quality Heating Part components, starting at $44.99.

show more show less

from

$44.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$213.99

GM Genuine Parts HVAC Heater Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC heater cores are small radiators, located in the plenum behind the dashboard. Engine coolant flows through the heater core in order to heat the air in the passenger compartment. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Long-life alloys provide corrosion resistance
High-strength brazed joints ensure durability
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$143.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$85.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Popular 2012 Cadillac Escalade ESV Air Conditioning Parts

Customize your Cadillac with 70 Air Conditioning Parts products like AC Compressor Without Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $436.99.

show more show less

from

$23.49

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$7.49

GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repairs leaking A/C system
Restores A/C function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$14.99

GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$173.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$11.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$141.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$58.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$29.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$41.99

Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
Ensure fit – check the product details to choose the best product for your needs
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$19.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$309.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$18.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$183.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$349.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$251.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$4.99

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$11.99

ACDelco GM Original Equipment HVAC Temperature Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$30.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$29.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Top Picks for 2012 Cadillac Escalade ESV Engine Cooling Parts

Upgrade Cadillac Escalade ESVs with top-quality Engine Cooling Parts parts, including 38 OEM and aftermarket selections for your 2012 model.

show more show less

from

$311.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$38.99

ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$7.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$21.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$17.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$40.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$7.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$327.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$215.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$52.99

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$11.49

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$5.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$153.99

Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load.

Product Features:

100% leak testing and hub-pull testing ensures reliable performance.
O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).

from

$65.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$19.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$17.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$344.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$381.99

An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:

All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
Thoroughly tested for reliable, leak-free performance
Coated seals support seal longevity and durability
Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
High-quality bearings are permanently sealed and lubricated for greater durability and long life
Come with premium, high-quality replacement components needed for trouble-free and accurate installation
Uniform wall sections and smooth coolant-flow cavities for efficient operation
Cast-iron or aluminum design, depending on vehicle application

from

$232.99

New Platinum Pro Radiator, 34 Inch Core With Engine And Transmission Oil Coolers

Product Features:

34 Inch Core With Engine Oil Cooler And TOC, Without Heavy Duty Cooling, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

In-Demand Blower Motor and Related Products for 2012 Cadillac Escalade ESVs

Select from 7 premium Blower Motor and Related Products parts for your 2012 Cadillac Escalade ESV, with prices ranging from $54.99 to $206.99.

show more show less

from

$206.99

GM Genuine Parts HVAC Blower Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC blower motors are electric fans located in the HVAC housing. The fan pushes air through the heater core and evaporator and into the cabin. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Permanently lubricated, self-aligning bearings designed for long life and dependable performance
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$76.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$113.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE performance
Engineered to exceed OE design
Windings meet or exceed OEM specifications
Engineered for extended Durability

from

$54.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$102.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$83.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$72.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Most Sold 2012 Cadillac Escalade ESV Blend Doors

Explore our best-selling Cadillac parts for the 2012 Escalade ESV among 5 OEM and aftermarket options starting from $49.99.

show more show less

from

$49.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$83.99

Corrects mode door malfunction caused by a failed actuator
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$255.99

ACDelco GM Original Equipment HVAC Air Valve Actuator is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment actuator will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$129.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$115.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top-Rated Cooling and Climate Controls Brands For Your 2012 Cadillac Escalade ESV

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2012 Cadillac Escalade ESVs. Below you’ll find some of our best rated Cooling and Climate Controls from GM Genuine, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2012 Escalade ESV start at just $7.49 and are rated as high as 4.5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular GM Genuine 2012 Cadillac Escalade ESV Cooling and Climate Controls

When it comes to maintaining or upgrading your 2012 Cadillac Escalade ESV, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Cooling and Climate Controls, specifically designed for the 2012 Cadillac Escalade ESV. With over 3 GM Genuine brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $35.49. Plus, with over 14 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $83.99

(1)

Heating and Air Conditioning Panel Mode Door Actuator

“I replaced this two days ago and so far it works perfectly. One tip I would give is to plug it in before installing and set the mode to feet, unplug i”

from $14.99

(6)

Air Conditioning System Valve Core

“Goof”

from $7.49

(7)

Air Conditioning Service Valve

“Thanks”

Popular Carquest Premium 2012 Cadillac Escalade ESV Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2012 Cadillac Escalade ESV owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2012 Escalade ESV, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $21.99 to $311.99, plus, with more than 102 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $173.99

(1)

A/C Plate and Fin Evaporator

“Easy to install once the HVAC box is removed. Finally COLD air. Colder that the original factory air. I had a quote of $1300 but replaced the evaporat”

from $311.99

(95)

Radiator: With Transmission Oil Cooler

“N/A”

from $21.99

(6)

Radiator Cap: 20 PSI

“Easy to deal with and great products”

FAQs for 2012 Cadillac Escalade ESV Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2012 Cadillac Escalade ESVs?

Out of 126 Cooling and Climate Controls that fit 2012 Cadillac Escalade ESVs, the following parts are the top sellers:

Engine Water Pump Gasket (15780035) – $7.49
Standard Thermostat: With Seal, 187 Degrees (10321763) – $34.99
Engine Water Pump: New, Gasket/Seals Included (15760047) – $215.99

What’s the price range for 2012 Cadillac Escalade ESV Cooling and Climate Controls?

Cooling and Climate Control prices for the 2012 Cadillac Escalade ESV start at $1.49 and go up to $436.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2012 Cadillac Escalade ESV?

The average price for Cooling and Climate Controls for the 2012 Cadillac Escalade ESV is $81.94. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Cadillac Escalade ESV model years?

Yes, we currently carry Cooling and Climate Controls for 22 model years of Cadillac Escalade ESVs between 2003 and 2026. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2012 Cadillac Escalade ESV?

The cheapest 2012 Cadillac Escalade ESV Cooling and Climate Controls we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
Engine Coolant Thermostat Housing Seal (15781028) – $5.99
Engine Water Pump Gasket (15780035) – $7.49
Engine Water Pump Gasket Kit (11469097) – $7.49

What are the top-rated Cooling and Climate Controls that fit the 2012 Cadillac Escalade ESV?

Out of 3,088 reviews by customers, our 2012 Cadillac Escalade ESV Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2012 Cadillac Escalade ESV and their top-rated products:

Engine Cooling Parts
- Radiator: With Transmission Oil Cooler (19920405) – $311.99
- Radiator Cap: 20 PSI (10647381) – $21.99
- Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (11153255) – $17.99
Blower Motor and Related Products
- Radiator: With Transmission Oil Cooler (19920405) – $311.99
- Radiator Cap: 20 PSI (10647381) – $21.99
- Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (11153255) – $17.99

What types of Cooling and Climate Controls do you sell for my 2012 Cadillac Escalade ESV?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2012 Cadillac Escalade ESV:

Can I get help with 2012 Cadillac Escalade ESV Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Cooling and Climate Controls and more.

What is your return policy for Cadillac Escalade ESV Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade ESV Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Cadillac Escalade ESV Cooling and Climate Controls

Carquest Premium – Standard Thermostat: With Seal, 187 Degrees (Part No.15158)

Carquest Premium – A/C Valve Core/Cap (Part No.T26775)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56776)

Carquest Premium – Heater Core (Part No.910563)

Dorman – Engine Heater Hose Assembly (Part No.626-591)

GM Genuine Parts – Water Inlet Seal (Part No.12587397)

GM Genuine Parts – Heating and Air Conditioning Panel Mode Door Actuator (Part No.15-73952)

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Carquest Premium – Radiator: With Engine And Transmission Oil Coolers (Part No.4113569)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85945)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1506)

GM Genuine Parts – Air Conditioning Condenser Orifice (Part No.19418346)

Carquest Premium – A/C Refrigerant Filter (Part No.T39336)

Carquest Premium – A/C New, with Clutch, with 10S20F Compressor (Part No.T78377)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Dorman – OE Solutions Auxiliary Cooling Fan Assembly (Part No.G5000829589DOR)

Dorman – Pressurized Coolant Reservoir: Black and White, Plastic, Original Equipment Replacement (Part No.603-054)

GM Genuine Parts – ABS Wheel Speed Sensor (Part No.20938122)

Felpro – Engine Water Pump Gasket (Part No.36110)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1264)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56775)

GM Genuine Parts – Parking Light Relay (Part No.D1777C)

Carquest Premium – Blower Motor: with Wheel (Part No.75039)

Carquest Premium – Multi-Use Connector (Part No.PTA1011)

Carquest Premium – Multi-Use Connector (Part No.PTA1017)

Factory Air – System Mounted Pressure Transducer (Part No.20915)

GM Genuine Parts – Heater Core (Part No.15-62960)

Carquest Premium – Heater Core (Part No.394204)

Carquest Premium – Heater Core (Part No.910563)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54873)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.20055)

Dorman – A/C Service Valve Cap (Part No.902-025)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55007)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39314)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.20058)

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Carquest Premium – A/C Dark Grey Porous Orifice Tube (Part No.T38644)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Carquest Standard – Remanufactured Compressor with Clutch (Part No.DW77377)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Carquest Premium – A/C Condenser (Part No.2317)

Carquest Premium – A/C New, with Clutch, with 10S20F Compressor (Part No.T78377)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Carquest Premium – A/C New; w/ Clutch; w/ 10S20F Compressor (Part No.T78363)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

ACDelco – Instrument Panel Air Duct Air Temperature Sensor (Part No.15-5632)

Carquest – Multi-Purpose Relay (Part No.83A1004)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1033)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432298)

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4514)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Engine Water Pump Gasket Kit (Part No.ES 73010)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

Felpro – Engine Water Pump Gasket (Part No.35635)

Carquest Premium – Radiator: With Engine and Transmission Oil Coolers (Part No.432306)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T7053)

Dorman – Pressurized Coolant Reservoir: Black and White, Plastic, Original Equipment Replacement (Part No.603-054)

GM Genuine Parts – Parking Light Relay (Part No.D1777C)

Carquest Premium – Standard Thermostat: With Seal, 187 Degrees (Part No.15158)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Driveworks Water Pumps – Water Pump (Part No.58-653)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Coolant Temperature Sensor 1TS1001 (Part No.WTC1002)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218CD)

Dorman – Radiator Fan Assembly: Dual, Cost Effective and Reliable (Part No.620-654)

ACDelco – Water Pump Kit (Part No.252-901)