2012 Audi A5 Quattro Body Parts
More 2012 Audi A5 Quattro Body Parts Categories
If you’re looking for an original Body Parts replacement for a 2012 Audi A5 Quattro, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 2012 Audi A5 Quattro Body Parts
Original Equipment – Trunk Latch (Part No.O2059396301OEA)
from
$69.40
Trunk Latch
Vemo – Window Switch (Part No.O3060462952VMO)
from
$21.19
Window Switch
Carquest Premium – Door Window Switch (Part No.WSA2237)
from
$228.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
KAI – Passenger Side Front Fender, Made Of Aluminum (Part No.AU1241129)
from
$509.99
New Standard Replacement Passenger Side Fender, Made Of Aluminum
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Passenger Side Front Fender, Made Of Aluminum (Part No.AU1241129C)
from
$539.99
New CAPA Certified Standard Replacement Passenger Side Fender, Made Of Aluminum
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Original Equipment – Door Mirror Switch (Part No.O5060811634OEA)
from
$30.98
Door Mirror Switch
StrongArm – Trunk Lift Support: 13.78" Ext Length, 5.394" Travel, 0 Lbs of Force, 1 Pk (Part No.E7058)
from
$39.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
Stabilus – Gas Charged Hood Strut (Part No.O2020455954STB)
from
$39.66
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Hood Lift Support: 30.00" Ext Length, 0 Travel, 0 Lbs of Force, 1 Pk (Part No.B7150)
from
$39.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.4369HRSG)
from
$104.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.4250)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.5326)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Vaico – Trim Fastener, Black (Part No.O6072462069VCO)
from
$2.17
Trim Fastener, Black
Febi – Shock Bump Stop (Part No.L4041400933FEB)
from
$21.32
Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style shocks
- Are built with design and quality that matches or exceeds OE quality
Febi – Shock Bump Stop (Part No.L40411517478FEB)
from
$17.81
Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style shocks
- Are built with design and quality that matches or exceeds OE quality
Popular 2012 Audi A5 Quattro Body Parts Categories
2012 Audi A5 Quattro Body Parts
You count on your 2012 Audi A5 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 27 Body Parts ranging in price from $2.17 to $539.99, you’re sure to find everything you need for your 2012 Audi A5 Quattro.
Brands matter. If you want to shop a specific Body Parts brand, we stock 11 different brands like Burco, Original Equipment, and Stabilus. 2012 Audi A5 Quattro Body Parts start as low as $2.17!
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2012 Audi A5 Quattro below to get started!
FAQs for 2012 Audi A5 Quattro Body Parts
What are the most purchased Body Parts for the 2012 Audi A5 Quattro?
Out of 27 Body Parts for the 2012 Audi A5 Quattro, the most popular in our inventory are:
