2011 Volkswagen Routan Suspension Parts

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The highest quality replacement strut mount available
• Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
• Superior rubber reduces noise, vibration and harshness
• Mount bearings provide smoother steering and help retain front end alignment
• Matched grade studs and nuts

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
• LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
• OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

• Strut Mount
• Bearing
• Upper Spring Isolator
• Lower Spring Isolator
• Upper Spring Seat

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
• 1-3/8 inch (34.9 mm) bore (On most applications)
• 5/8-inch (15.9 mm) diameter piston rod (On most applications)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

• REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
• EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
• LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
• 5/8 nitrocarburized rod for long service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Engineered to meet or exceed OE requirements
• Incorporates proven design and engineering features

SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:

• SACHS Service Kits help to prolong the life and performance of the shock or strut.
• Always replace your Service kits in pairs.
• Are built with design and quality that matches or exceeds OE quality

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Reduces road noise
• Reduces vibration
• UV resistant

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Reduces road noise
• Reduces vibration
• UV resistant

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil-Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

• QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
• RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
• VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
• OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
• MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
• MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
• IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
• RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
• ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel