2011 Toyota Venza Suspension Parts
More 2011 Toyota Venza Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2011 Toyota Venza, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2011 Toyota Venza Suspension Parts
MOOG – Coil Spring Set (Part No.81701)
from
$133.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – OESpectrum Strut (Part No.72963)
from
$149.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
- Premium – Limited Lifetime Warranty
- For Commercial Usage Refer to Product Warranty
KYB – Gas Strut (Part No.339219)
from
$282.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- #1 Recommended Original Equipment Replacement Choice For Asian Subs And Crossovers
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Toyota Venza
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
- Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb104
Dorman – Suspension Strut Rod (Part No.522-416)
from
$39.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
MOOG – Suspension Coil Spring Seat (Part No.K80925)
from
$22.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Dorman – Lateral Arm (Part No.522-417)
from
$54.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm Bushing (Part No.K201640)
from
$22.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Rare Parts – Control Arm Bush (Part No.RP18833)
from
$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Monroe – Strut-Mate Strut Mounting Kit (Part No.906986)
from
$75.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Strut-Mate Strut Boot Kit (Part No.63640)
from
$28.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Monroe – Strut-Mate Suspension Strut Mount (Part No.902064)
from
$61.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Rare Parts – Strut Mount (Part No.RP53651)
from
$146.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
Suncore – Quick Strut (Part No.55S15922)
from
$119.99
Quick Strut
KYB – Complete Corner Unit Assembly -Strut, Mount and Spring (Part No.SR4454)
from
$237.99
A strut assembly handles vehicle weight, determines ride height, acts as the steering pivot, controls vehicle stability and can affect a vehicles electronic crash avoidance systems. As an original equipment supplier, KYB understands how your vehicle should ride, handle and perform. The KYB Strut-Plus is engineered to help restore the handling and control capabilities of your vehicle. We start with an Original Equipment (OE) Restoring KYB Strut. High carbon steel coil springs are developed considering vehicle attributes and corners weights to help make sure the ride height is restored within OE specifications.
Product Features:
See More
Product Features:
- #1 Recommended Original Equipment Replacement Choice For Asian Vehicles
- Designed For Proper Ride Height And Original Handling Capabilities On Your Fwd Toyota Venza
- Includes A KYB Excel-G Strut, A Stronger Steel Outer Shell And KYB’S Application Specific Precision Designed Damping Valves
- Winner Of 2018 Best Overall Import Aftermarket Product
- Exact Fitment Engineered And Pre-Assembled For Professional Results
- Features An Application Engineered KYB Spring Designed To Match The Strut, Maintain Proper Ride Height Longer And Control Weight Without Sacrificing Vehicle Ride Quality
- Left And Right Part Numbers With Side-Specific Design And Components, As The Vehicle Manufacturer Intended
- Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
- Winner Of 2018 Best Overall Import Aftermarket Product
KYB – Bellows Bump Stop Kit (Part No.L303734952KYB)
from
$27.38
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
KYB – Jounce Bumper and Bellows (Part No.SB102)
from
$32.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90463)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Dorman – Suspension Control Arm (Part No.526-046)
from
$111.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm (Part No.RK643136)
from
$36.49
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
KYB – Strut Mounting Kit (Part No.L3033847756KYB)
from
$67.72
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
KYB – Spring Seat Insulator (Part No.L5013286218KYB)
from
$28.32
KYB Spring Seat Insulators eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Spring Seat Insulator cushions the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle.
Product Features:
See More
Product Features:
- Eliminates vibration and noise
- Reduces squeaks, rattles, and vibration noise
- Quality that matches or exceeds OE
Monroe – Strut-Mate Coil Spring Insulator (Part No.904953)
from
$27.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Spring Seat Insulator (Part No.SM5469)
from
$22.79
KYB spring seats and insulators eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB spring seats and insulators have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Spring Insulator Available
- Reduces Squeaks, Rattles And Vibration Noises
- Built With Design And Quality That Matches Or Exceeds Original Equipment
Rare Parts – SPRING SEAT INSUL (Part No.RP53175)
from
$38.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
MOOG – Strut Bellows (Part No.K90461)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Boot Kit (Part No.63630)
from
$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Popular 2011 Toyota Venza Suspension Parts Categories
2011 Toyota Venza Suspension Parts
You count on your 2011 Toyota Venza to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 66 Suspension Parts ranging in price from $16.99 to $336.99, you’re sure to find everything you need for your 2011 Toyota Venza.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 7 different brands like Moog, Monroe, and KYB. 2011 Toyota Venza Suspension Parts start as low as $16.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 66 extensive product reviews on 2011 Toyota Venza Suspension Parts. Some of the top-rated Suspension Parts products we carry are Jounce Bumper and Bellows with 3.3 stars and Strut-Mate Strut Boot Kit with 1.0 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2011 Toyota Venza below to get started!
Top-Rated Suspension Parts Brands For Your 2011 Toyota Venza
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Toyota Venza running right for years to come. In our inventory you’ll find brands like Moog, Monroe, KYB, and even more.
Popular MOOG Suspension Parts
You’ll find popular MOOG brand products across Shocks and Struts. All are waiting to get your 2011 Toyota Venza back on the road. Some of the top-rated MOOG products in these categories are:
FAQs for 2011 Toyota Venza Suspension Parts
What are the most purchased Suspension Parts for the 2011 Toyota Venza?
Out of 66 Suspension Parts for the 2011 Toyota Venza, the most popular in our inventory are:
from
$32.49
This product is not rated
Jounce Bumper and Bellows
Shock Boots, Levelers, and Accessories
What are the top-rated 2011 Toyota Venza Suspension Parts?
Top-rated Suspension Parts for your 2011 Toyota Venza based on customer reviews/ratings are:
from
$25.49
(3)
Jounce Bumper and Bellows
“the KYB dirt cover and rebound bumper fit as advertised. the quality looks to be good. what more can i say right now?”
from
$28.99
(1)
Strut-Mate Strut Boot Kit
“This product is absolute junk. I ordered two for one for each side. Neither came with all the parts that the box says are supposed to be in the packag”
