Name: Pre-Pressed Rear Axle
Brand: Dorman
SKU: 926-145
Price: 928.99 USD

from

$928.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:

Easier installation – this loaded axle assembly includes a pre-assembled new axle shaft, wheel bearing, hub and backing plate
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$461.99

Yukon standard open spider gear kit for Toyota T100 & Tacoma with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Toytoa Tacoma and T100 open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.

from

$101.99

7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:

Carrier shim kit
Fits Toyota 7.5″

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$30.99

Product Features:

Pinion gear thrust washer
Fits Toyota Tacoma and T100

from

$28.99

Product Features:

Brand may vary by location

from

$23.99

07 and up Tundra front pinion nut.

Product Features:

Pinion nut
Fits 2007 and up Toyota Tundra front

from

$37.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$92.99

Toyota V6, T100 pinion seal w/factory elec. locker & factory yoke (OE replacement ONLY).Yukon Mighty seal.

Product Features:

Pinion seal
Fits toyota Tacoma and T100 with factory locker and Toyota V6

from

$313.99

This differential lock actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Ideal replacement – this differential lock actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative differential lock caused by failed original actuator
Cost-effective solution – offers original equipment fit and function at a competitive price
Trustworthy quality – backed by a team of designers and engineers in the United States

from

$8.51

Axle Seal

from

$15.99

Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:

Outer slinger
Fits 10.5″ Toyota Tundra

from

$21.99

Toyota 07 & up Tundra rear 9.5″ outer pinion slinger w/ 4.0L & 4.7L .

Product Features:

Outer slinger
Fits 9.5″ Toyota Tundra

from

$629.99

USA Standard Master Overhaul kit for Toyota 10.5″ rear

Product Features:

Rear
Toyota 10.5″

from

$489.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Toyota T100 and Tacoma without factory locker
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.

from

$364.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits reverse rotation Toyota 7.5″
7.500″ ring gear diameter
23 spline pinion
10 ring gear bolts
4.56 ratio

from

$404.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Toyota T100 & Tacoma rear without factory locking differential
8.125″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.88 ratio

from

$15.99

Product Features:

Carrier shim kit for Dana Spicer 30 with 30 spline axles

from

$12.99

07 and up Tundra rear 10.5″ ring gear bolt W/ 5.7L.

Product Features:

Ring gear bolt
Fits 10.5″ Toyota Tundra

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$16.99

Toyota 7.5″ crush sleeve, 2.185″ long.

Product Features:

Crush sleeve for Toyota 7.5″
2.185″ tall

from

$57.99

07 and up Tundra rear 9.5″ crush sleeve W/ 4.0L & 4.7L.

Product Features:

Crush sleeve
Fits 9.5″ Toyota Tundra

from

$179.99

07 and up Tundra rear 10.5″ cross pin shaft W/5.7L.

Product Features:

Cross pin shaft
Fits 10.5″ Toyota Tundra

from

$73.99

Product Features:

Cross pin shaft
Fits Toyota Tacoma and T100

from

$479.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Toyota Tacoma and T100 rear without factory locking differential
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.

from

$406.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes side shims.

Product Features:

Fits reverse rotation Toyota 7.5″ front
Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$469.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Toyota Tacoma and T100 rear without factory locking differential
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$434.99

DiffrlPartsKit

2011 Toyota Tundra Differentials

More 2011 Toyota Tundra Differentials

Essential 2011 Toyota Tundra Differentials

Dorman – Pre-Pressed Rear Axle (Part No.926-145)

Yukon Gear – Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles (Part No.16133)

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Yukon Gear – T100 & Tacoma Standard Pinion Gear Thrust Washer (Part No.33396)

Driveworks – Tapered Roller Bearing (Part No.S-32010X)

Yukon Gear – 07 And Up Tundra Front Pinion Nut (Part No.33159)

National – Shaft Repair Sleeve (Part No.99181)

Yukon Gear – Toyota V6, T100 Pinion Seal With Factory Elec – Locker & Factory Yoke (Part No.30336)

Dorman – Front Differential Actuator (Part No.600-420)

Corteco – Axle Seal (Part No.K4021473844CFW)

Yukon Gear – Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L (Part No.33024)

Yukon Gear – Toyota 07 & Up Tundra Rear 9.5" Outer Pinion Slinger With 4.0L & 4.7L (Part No.33023)

USA Standard Gear – Rear Master Overhaul Kit for Toyota 10.5" (Part No.37120)

USA Standard Gear – Master Overhaul Kit for Toyota T100 and Tacoma Rear Differential, without Factory Locker (Part No.37105)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota Tacoma And T100 75" IFS Reverse Rotation (Part No.24189)

USA Standard Gear – Ring & Pinion Gear Set For Toyota T100 And Tacoma In A 4.88 Ratio (Part No.36240)

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Yukon Gear – 07 And Up Tundra Rear 10.5" Ring Gear Bolt With 5.7L (Part No.33065)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – Toyota 7.5" Crush Sleeve (Part No.33115)

Yukon Gear – 07 And Up Tundra Rear 9.5" Crush Sleeve With 4.0L & 4.7L (Part No.33353)

Yukon Gear – 07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L (Part No.33415)

Yukon Gear – T100 & Tacoma Standard Cross Pin Shaft (Part No.33417)

Yukon Gear – Bearing Install Kit For Toyota T100 And Tacoma Differential (Part No.11085)

Yukon Gear – Master Overhaul Kit For Toyota 7.5" IFS Differential For T100, Tacoma, And Tundra (Part No.14175)

Yukon Gear – Master Overhaul Kit For Toyota T100 And Tacoma Rear Differential, With O Factory Locker (Part No.14113)

Yukon Gear – DiffrlPartsKit (Part No.14233)

Popular 2011 Toyota Tundra Differentials Categories

2011 Toyota Tundra Differentials

Differentials Brands To Make Your 2011 Toyota Tundra Last

Popular Valvoline Differentials

FAQs for 2011 Toyota Tundra Differentials

What are the most purchased Differentials for the 2011 Toyota Tundra?

More Popular Parts for All Makes