2011 Ram 3500 Transmission Parts

Below you will find various in-demand Ram Transmission Parts, components and accessories for your 2011 3500. Advance Auto Parts has popular 3500 parts like Transmission Bearings, Automatic Transmission Parts, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other 3500 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2011 Ram 3500 Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2011 Ram 3500 Transmission Parts Categories

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Master and Slave Cylinder Assemblies

Transmission Solenoids

Transmission Oil Cooler Lines

Countershaft Bearings

Back Up Lamp Switches

Transmission Pan Gaskets

Shift Interlock Solenoids

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Main Shaft Bearings

Automatic Transmission Oil Pump Seals

Pinion Seals

Transmission Seals and O-rings

Manual Transmission Bearing and Seal Overhaul Kits

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic and Manual Transmission Shift Boots

Shaft Seals

Input Shaft Bearings

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Remanufactured Automatic Transmissions

Manual Transmission Input Shafts

Manual Transmission Shifter Assemblies

Automatic Transmission Shift Lever Bracket

Automatic Transmission Accumulator Piston

Essential Transmission Parts for 2011 Ram 3500s

from

$215.99

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

LuK pressure lines are made of steel or plastic and are protected with a rubber or fabric covering to protect against wear.
LuK hydraulic lines come with membrane dampers, as well as frequency adjusted vibration absorbers on the clutch master cylinder.
LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
Schaeffler also offers hydraulic pipes with special filter elements. These help to dampen vibrations that are generated by the crankshaft and can be transmitted through the release system to the pedal.
The LuK Clutch Master and Slave Cylinder Assembly features easy installation and reliability. It is engineered to meet or exceed OEM standards. Its superior design ensures smooth and consistent clutch operation.

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$51.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Back Up Light Switch automatically activates the rear backup lights when the vehicle is shifted into reverse. This improved visibility for the driver and alerts other vehicles or pedestrians when the vehicle is reversing, reducing the risk of accidents. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$465.99

This automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$33.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$358.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -100 Deg. F to 450 Deg. F; -73 Deg. C to 232 Deg.C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$24.79

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

Radial Ball Bearing, Both Sides Shield.
Coverage of classic and new high-tech solutions for the best system coverage

from

$87.99

When the column-mounted shift lever on certain Dodge and Ram trucks becomes sloppy or inoperable, it’s typically because the original equipment shift bracket connecting the lever to the shift cable has lost its grip on the shifter arm or completely failed. The factory bracket is made from soft cast aluminum and relies on just a single bolt to secure the shift lever. The routine, repetitive motion of gear selection places stress on the single bolt and eventually causes it to loosen, which results in unwanted play in the shifter. Attempting to eliminate the slop in the lever by tightening the bolt often causes the threads to strip and the weak aluminum bracket to break. This Dorman OE FIX shift lever bracket is upgraded to address the two main reasons the OE bracket fails and provide a long-lasting repair that ensures a once-and-done installation. Our bracket is manufactured from a higher grade, more durable aluminum alloy, and engineered with an innovative and much sturdier double-bolt design that more effectively and consistently distributes the stresses of the shift lever motion. This bracket is designed to match the fit of the original part for a hassle-free and predictable repair and also includes a direct replacement shift interlock solenoid. Only want to replace the bracket? Order Dorman part number 905-670 for just the bracket without the connected shift interlock solenoid.

Product Features:

Upgraded repair – this shift bracket is manufactured from more durable aluminum than the OE design and features a sturdier double-bolt design that more effectively distributes the stresses of shifting
Once-and done solution – don’t risk replacing your bracket with one that could also strip or fail later; this design truly fixes the root cause of failure so you don’t have to replace it again
Direct replacement – designed to match the fit of the original equipment shift bracket on specified Dodge and Ram trucks for a hassle-free, reliable repair
Also available without solenoid – only want to replace the bracket? Order Dorman part number 905-670 for just the bracket without the connected shift interlock solenoid

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$197.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$64.99

Anchor 3376 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2022
Weight approx: 4 Lbs

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$41.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$81.99

When a transmission shifter interlock solenoid fails, the dealership usually says you need to buy a whole new shifter. This Dorman OE FIX solution allows you to directly replace only the failed solenoid, saving money.

Product Features:

Direct replacement – this shift interlock solenoid directly replaces the factory solenoid on select vehicles
Cost-effective solution – ideal alternative to buying an entire new shifter from the original manufacturer
Restores shifting – solves problem with solenoid not actuating from internal short circuit
Quality engineering – designed and tested in the United States

from

$87.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$24.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Upgrade your 2011 Ram 3500 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2011 Ram 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ram or enhancing its overall performance, Transmission Parts are key to keeping your 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 105 Transmission Parts for the 2011 Ram 3500, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2011 Ram 3500 at great prices. Our Transmission Parts inventory for this model ranges from just $4.99 to $4,740.99, with an average price of $472.94. Our 105 Transmission Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 2011 Ram 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ram 3500, we stock popular OEM and aftermarket Transmission Parts from top names like National, Driveworks, Imperial, and more. National Transmission Parts start at just $17.49 and boast an impressive 4.3 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $10.99, and at an average 4.2 stars rating. With 901 customer reviews and counting, our 2011 Ram 3500 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Ram 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your 3500 in top shape, all in one place. Start shopping confidently below for your 2011 Ram 3500!

Best-Selling Transmission Bearings for 2011 Ram 3500s

Enhance the driving experience in your Ram with 7 quality Transmission Bearing components, starting at $17.49.

show more show less

from

$17.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$44.49

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$41.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$22.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$24.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$94.99

ManTransBrgRetainer

Most Popular 2011 Ram 3500 Automatic Transmission Parts

Customize your Ram with 21 Automatic Transmission Parts products like Automatic Transmission Shift Linkage Bushings, Transmission Solenoids, and Shift Interlock Solenoids, all priced under $4,740.99.

show more show less

from

$3342.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$24.49

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$476.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$81.99

Direct replacement – this shift interlock solenoid directly replaces the factory solenoid on select vehicles
Cost-effective solution – ideal alternative to buying an entire new shifter from the original manufacturer
Restores shifting – solves problem with solenoid not actuating from internal short circuit
Quality engineering – designed and tested in the United States

from

$4740.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$4739.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$4693.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$4693.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3734.99

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$3734.99

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$3159.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2549.99

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2549.99

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2538.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2257.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2257.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$615.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$465.99

Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$87.99

Upgraded repair – this shift bracket is manufactured from more durable aluminum than the OE design and features a sturdier double-bolt design that more effectively distributes the stresses of shifting
Once-and done solution – don’t risk replacing your bracket with one that could also strip or fail later; this design truly fixes the root cause of failure so you don’t have to replace it again
Direct replacement – designed to match the fit of the original equipment shift bracket on specified Dodge and Ram trucks for a hassle-free, reliable repair
Also available without solenoid – only want to replace the bracket? Order Dorman part number 905-670 for just the bracket without the connected shift interlock solenoid

from

$74.99

When the column-mounted shift lever on certain Dodge and Ram trucks becomes sloppy or inoperable, it’s typically because the original equipment shift bracket connecting the lever to the shift cable has lost its grip on the shifter arm or completely failed. The factory bracket is made from soft cast aluminum and relies on just a single bolt to secure the shift lever. The routine, repetitive motion of gear selection places stress on the single bolt and eventually causes it to loosen, which causes unwanted play in the shifter. Attempting to eliminate the slop in the lever by tightening the bolt often causes the threads to strip and the weak aluminum bracket to break. This Dorman OE FIX shift lever bracket is upgraded to address the two main reasons the OE bracket fails and provide a long-lasting repair that ensures a once-and-done installation. Our bracket is manufactured from a higher grade, more durable aluminum alloy, and engineered with an innovative and much sturdier double-bolt design that more effectively and consistently distributes the stresses of the shift lever motion. This bracket is designed to match the fit of the original part for a hassle-free and predictable repair. Also need to replace the shift interlock solenoid? Order Dorman part number 905-671 that includes both the bracket and solenoid.

Product Features:

Upgraded repair – this shift bracket is manufactured from more durable aluminum than the OE design and features a sturdier double-bolt design that more effectively distributes the stresses of shifting
Once-and-done solution – don’t risk replacing your bracket with one that could also strip or fail later; this design truly fixes the root cause of failure so you don’t have to replace it again
Direct replacement – designed to match the fit of the original equipment shift bracket on specified Dodge and Ram trucks for a hassle-free, reliable repair
Complete kit available – if you also want to replace the shift interlock solenoid attached to the bracket, order Dorman part number 905-671

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top Picks for 2011 Ram 3500 Transmission Mounts

Upgrade Ram 3500s with top-quality Transmission Mounts parts, including 2 OEM and aftermarket selections for your 2011 model.

show more show less

from

$64.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2022
Weight approx: 4 Lbs

from

$80.99

Product Features:

This mount supports the transmission and dampens vibration.
Natural and SBR rubber provide maximum life and performance.
Steel fasteners are heat treated grade 5 bolts.
A special bonding agent is used to ensure a rubber to metal bond.
Rubber material is mixed to specific Durometer, hardness.
Limited Warranty.
All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

In-Demand Transmission Seals for 2011 Ram 3500s

Select from 18 premium Transmission Seals parts for your 2011 Ram 3500, with prices ranging from $4.99 to $1,390.00.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -100 Deg. F to 450 Deg. F; -73 Deg. C to 232 Deg.C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$32.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 deg. F to 400 deg. F / -40 deg. C to 204 deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$17.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.49

Product Features:

Brand may vary by location

from

$1390.00

ManTransBrg-SealKit

from

$26.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$18.49

AT EXT HOUSING SEAL

from

$16.99

ManTransOtptShftSeal

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

from

$12.99

ManTransOtptShftSeal

from

$8.49

Product Features:

Brand may vary by location

from

$6.99

TCaseShiftShaftSeal

from

$4.99

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

Most Sold 2011 Ram 3500 Transmission Cooler and Parts

Explore our best-selling Ram parts for the 2011 3500 among 16 OEM and aftermarket options starting from $11.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$568.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$336.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$183.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$166.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$158.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top-Rated Transmission Parts Brands For Your 2011 Ram 3500

Shop for the best-rated brands offering Transmission Parts and other products for your 2011 Ram 3500s. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 2011 3500 start at just $10.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2011 Ram 3500 Transmission Parts

When it comes to maintaining or upgrading your 2011 Ram 3500, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2011 Ram 3500. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.49, with an average price of just $17.76. Plus, with over 5 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(1)

Multi-Purpose Seal

“great product exact fit as OEM front differential pinion seal”

from $17.49

(1)

Bearing Race

“I needed them quick an as inexpensive as possible. It was a great buy and experience I would do it again”

from $17.79

(3)

Multi Purpose Seal

“Installed easy and functions as expected”

Popular Driveworks 2011 Ram 3500 Transmission Parts

Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 2011 Ram 3500 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2011 3500, Advance Auto Parts carries a full inventory of 1 Driveworks Transmission Parts. Plus you will be keeping your Ram in peak condition while saving money because prices on these Driveworks Transmission Parts range up to $10.99, plus, with more than 8 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

FAQs for 2011 Ram 3500 Transmission Parts

Which Transmission Parts are best-sellers for 2011 Ram 3500s?

Out of 105 Transmission Parts that fit 2011 Ram 3500s, the following parts are the top sellers:

Econo-Kool Transmission Oil Cooler (6014720) – $40.99
Tapered Roller Bearing Cone (5052513) – $25.99
Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99

What’s the price range for 2011 Ram 3500 Transmission Parts?

Transmission Part prices for the 2011 Ram 3500 start at $4.99 and go up to $4,740.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2011 Ram 3500?

The average price for Transmission Parts for the 2011 Ram 3500 is $472.94. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ram 3500 model years?

Yes, we currently carry Transmission Parts for 13 model years of Ram 3500s between 2012 and 2025. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2011 Ram 3500?

The cheapest 2011 Ram 3500 Transmission Parts we carry in stock are:

Multi-Purpose Seal (12067632) – $4.99
42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (50074153) – $4.99
Auto Transmission Manual Shaft Seal (11494069) – $6.49
TCaseShiftShaftSeal (12008276) – $6.99
Auto Transmission Oil Pump Seal (11468570) – $8.49

What are the top-rated Transmission Parts that fit the 2011 Ram 3500?

Out of 901 reviews by customers, our 2011 Ram 3500 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2011 Ram 3500 and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99
Transmission Connectors
- Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99

What types of Transmission Parts do you sell for my 2011 Ram 3500?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2011 Ram 3500:

Can I get help with 2011 Ram 3500 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ram Transmission Parts and more.

What is your return policy for Ram 3500 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ram 3500 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Ram 3500 Transmission Parts

LuK – Master / Slave Cylinder Kit, Clutch (Part No.CRS049)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – Back Up Light Switch (Part No.SBC1205)

Dorman – Remanufactured Transmission Solenoid Pack (Part No.609-040)

Dorman – Transmission Line Quick Connector (Part No.800-723)

Felpro – Transmission Oil Pan Gasket: 22 Bolt Hole, One Piece Gasket (Part No.TOS 18770)

Carquest Premium – Automatic Transmission Oil Pressure Switch (Part No.SBA2005)

National – Multi Purpose Seal (Part No.710690)

National – Automatic Transmission Extension Housing Seal (Part No.710487)

National – Multi-Purpose Seal (Part No.710558)

National – Multi-Purpose Seal (Part No.710907)

Schaeffler – Bearing – DGBB (Deep Groove Ball Bearing) (Part No.6208-C3)

Dorman – Transmission Gearshift Bracket (OE Fix) (Part No.905-671)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR2A)

Felpro – Transmission Oil Pan Gasket: 13 Bolt Hole, One Piece Gasket (Part No.TOS 18773)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3376)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

National – Multi-Purpose Bearing (Part No.208)

Dorman – Transmission Shift Interlock Solenoid (OE Fix) (Part No.924-985)

Crown Auto Jeep Replacmnt – 42Rle Transmission (Part No.52852912AC)

National – Bearing Race (Part No.HM804810)

National – Bearing Race (Part No.28622)

National – Tapered Roller Bearing Cone (Part No.M802048)

National – Multi-Purpose Bearing (Part No.32208)

National – Multi-Purpose Bearing (Part No.208)

National – Bearing Race (Part No.45220)

National – Bearing Race (Part No.HM804810)

USA Standard Gear – ManTransBrgRetainer (Part No.72570)

Moveras – M01874 Remanufactured 68RFE Automatic Transmission Assembly (Part No.M01874)

Dorman – Help – Shift Cable Bushing Kit (OE Fix) (Part No.14104)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCE1003)

Dorman – Transmission Shift Interlock Solenoid (OE Fix) (Part No.924-985)

Shift Pro by ETE – 68RFE Automatic Transmission Assembly (Part No.T151506)

Shift Pro by ETE – 68RFE Automatic Transmission Assembly (Part No.T151508)

Shift Pro by ETE – 68RFE Automatic Transmission Assembly (Part No.T151507)

Shift Pro by ETE – 68RFE Automatic Transmission Assembly (Part No.T151505)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T68RFE6711T2)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T68RFE6711T4)

Moveras – M01873 Remanufactured 68RFE Automatic Transmission Assembly (Part No.M01873)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T45RFE5711HD4)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T45RFE5711HD2)

Shift Pro by ETE – 545RFE Automatic Transmission Assembly (Part No.T151303)

Moveras – M01925 Remanufactured 545RFE Automatic Transmission Assembly (Part No.M01925)

Moveras – M02175 Remanufactured 545RFE Automatic Transmission Assembly (Part No.M02175)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCE1178)

Dorman – Remanufactured Transmission Solenoid Pack (Part No.609-040)

Dorman – Transmission Gearshift Bracket (OE Fix) (Part No.905-671)

Dorman – Transmission Gearshift Bracket (OE Fix) (Part No.905-670)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3376)

Anchor – Transmission Mount (Part No.3673)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Multi-Purpose Seal (Part No.710558)

National – Multi-Purpose Seal (Part No.710557)

National – Multi Purpose Seal (Part No.221207)

National – Multi-Purpose Seal (Part No.4741)

National – Manual Transmission Output Shaft Seal (Part No.710905)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

USA Standard Gear – ManTransBrg-SealKit (Part No.71475)

National – Automatic Transmission Extension Housing Seal (Part No.711099)

ATP – AT EXT HOUSING SEAL (Part No.FO-199)

USA Standard Gear – ManTransOtptShftSeal (Part No.72507)

National – Multi-Purpose Seal (Part No.710907)

National – Manual Transmission Output Shaft Seal (Part No.710906)

USA Standard Gear – ManTransOtptShftSeal (Part No.71064)

Driveworks – Auto Transmission Oil Pump Seal (Part No.S-710557)

USA Standard Gear – TCaseShiftShaftSeal (Part No.71356)

National – Multi-Purpose Seal (Part No.710753)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)