2011 Porsche 911 Brake Rotors and Drums
More 2011 Porsche 911 Brake Rotors and Drums
Find your specific 2011 Porsche 911 original or aftermarket Brake Rotors and Drums below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Porsche 911 Brake Rotors and Drums
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)
from
$124.90
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145465)
from
$79.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200899)
from
$118.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor Meets or Exceeds OE Design (Part No.YH145089)
from
$89.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439643SEB)
from
$237.75
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N100053367SEB)
from
$288.58
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439642SEB)
from
$238.99
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N100026040SEB)
from
$316.77
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Original Equipment – Brake Disc (Rotor) (Part No.N10001883618OEA)
from
$598.23
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH424963)
from
$112.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Sebro – Coated Brake Rotor (Part No.N1000648153SEB)
from
$138.71
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N100026421SEB)
from
$324.30
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N100053365SEB)
from
$286.63
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200900)
from
$105.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Original Equipment – Brake Disc (Rotor) (Part No.N1000439667OEA)
from
$217.57
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Sebro – Coated Brake Rotor (Part No.N1000133765SEB)
from
$179.72
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Original Equipment – Brake Disc (Rotor) (Part No.N1000377998OEA)
from
$190.43
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Sebro – Coated Brake Rotor (Part No.N1000407220SEB)
from
$186.00
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N100022426SEB)
from
$125.13
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145463)
from
$150.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Sebro – Coated Brake Rotor (Part No.N100023273SEB)
from
$201.70
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated Brake Rotor (Part No.N1000133766SEB)
from
$179.29
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200909)
from
$103.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Original Equipment – Brake Disc (Rotor) (Part No.N1000682354OEA)
from
$517.52
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Sebro – Brake Disc (Part No.N1000439664SEB)
from
$198.92
Brake Disc
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N10001320005ZIC)
from
$131.97
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Original Equipment – Brake Disc (Rotor) (Part No.N1000474859OEA)
from
$789.56
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200908)
from
$103.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Popular 2011 Porsche 911 Brake Rotors and Drums Categories
2011 Porsche 911 Brake Rotors and Drums
Maybe you’re in the middle of a full rebuild of that 2011 Porsche 911. Maybe you just need a couple of Brake Rotors and Drums. Either way, Advance Auto Parts has 13 different Brake Rotors and Drums in our inventory ranging from $112.99 to $757.92. That means you can find the exact parts or products you need to keep that 2011 Porsche 911 running smoothly.
Brake Rotors and Drums are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Porsche 911. Sebro, Carquest, and Original Equipment are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Rotors and Drums for your 2011 Porsche 911, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Rotors and Drums to keep your 2011 Porsche 911 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Rotors and Drums Brands To Make Your 2011 Porsche 911 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Porsche 911 demands trusted brand parts and products to keep it running. Many trusted brands of Brake Rotors and Drums make up Advance Auto Parts’ inventory, and all are ready to help make your 911 the best it can be. Be sure to browse some of our top Brake Rotors and Drums brands and parts.
FAQs for 2011 Porsche 911 Brake Rotors and Drums
What are the most purchased Brake Rotors and Drums for the 2011 Porsche 911?
Out of 13 Brake Rotors and Drums for the 2011 Porsche 911, the most popular in our inventory are:
from
$112.99
This product is not rated
Disc Brake Rotor Meets or Exceeds OE Design
Front Brake Rotors
