2011 Porsche 911 Brake Parts

Brake Hardware Kit

The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:

• Reduced Brake Noise, comebacks and unsatisfied customers,
• Extends the life of a brake job,
• Improved fuel mileage, and
• Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
• reduce effective braking force
• cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
• cause excessive caliper movement
• cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance

Brake Hardware Kit

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
• Brand may vary by location

Brake Pad Shim

BRAKE PAD SET

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:

• Include the OE specified shims.
• Low noise and reduced vibrations.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic blended compound.

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:

• Include the OE specified shims.
• Low noise and reduced vibrations.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic blended compound.

For over 25 years Hawk Performance has been producing premium friction products that stop you faster and last longer. Whether you are looking to cut seconds off of your track time, need additional stopping power for your large vehicle, want a product that is cleaner and quieter or, just don’t want to have to think about brakes and rotors, Hawk Performance has the products to keep you safer. We leverage our experience on the track and the technology used in aerospace and the military to make the best brake pads and rotors for all of your vehicle’s needs. Our extensive Research & Development department, including a PhD in friction and 23 dynamometers, allows us to produce first class products in the USA.

Product Features:

• Smooth braking feel
• Excellent for spirited driving
• Gentle on rotors and extended pad life
• Consistent brake release characteristics
• Increased stopping power
• All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

• PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
• Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
• The pad surfaces are thermal scorched for fast break-in
• Includes premium stainless-steel hardware for hassle free installation
• Multi-Layer rubberized shims provide virtually noise-free braking
• Includes Premium stainless-steel hardware for easy installation

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

• PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
• Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
• The pad surfaces are thermal scorched for fast break-in
• Includes premium stainless-steel hardware for hassle free installation
• Multi-Layer rubberized shims provide virtually noise-free braking
• Includes Premium stainless-steel hardware for easy installation

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

• Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
• Positive mold technology for consistent wear and performance
• Thermal scorched pad surface for a fast break-in
• Chamfered and slotted to ensure noise-free braking
• Powder coated backing plate resists rust and corrosion to provide extended pad life
• Multi-Layer rubberized shims provide virtually noise-free braking

Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

• Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
• Positive mold technology for consistent wear and performance
• Thermal scorched pad surface for a fast break-in
• Chamfered and slotted to ensure noise-free braking
• Powder coated backing plate resists rust and corrosion to provide extended pad life
• Multi-Layer rubberized shims provide virtually noise-free braking

Brake Pad Set

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

TRW electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads.

Product Features:

• Exact Replacement with OE Fittings and Connectors
• Highly Durable and Resistant to Temperatures
• Supplied with OE style electrical connectors
• TRW is an OE supplier to Brake and Vehicle Manufacturers

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:

• Platform Specific Design
• Combats Brake Squeal
• OE-Style Composite Core Shim
• Effective Thermal Barrier

Brake Pad Shim

Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:

• Platform Specific Design
• Combats Brake Squeal
• OE-Style Composite Core Shim
• Effective Thermal Barrier

Brake Pad Sensor

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-Directional finish decreases break-in time

Brake Disc

Brake Disc

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE-Equivalent and Direct fit Application
• made of special cast iron with high carbon content
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Contains the same high quality craftsmanship as the original equipment manufacturer.
• Guarantees OE quality performance, durability and fitment.

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Brake Disc

Brake Disc

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:

• OE-Equivalent and Direct fit Application
• high carbon content disc
• Protective coating that resists corrosion
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.
• Improved thermal efficiency

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with an Original Equipment Disc Brake Caliper Bolt Kit. The Original Equipment Brake Caliper Bolts is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE Quality
• Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
• Pre-coated with thread lock to prevent loosening

Brake Caliper Bolt