2011 Nissan Titan Steering and Chassis Parts

Essential 2011 Nissan Titan Steering and Chassis Parts

Rein – Power Steering Return Hose (Part No.PSH0404)

Power Steering Return Hose

from

$29.99
Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose with clamps
  • OE quality, braided rubber compound hose
  • Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
  • Ensures proper operation of the power steering system
See More

Rare Parts – Tie Rod End (Part No.RP28728)

Tie Rod End

from

$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Sankei 555 – Ball Joint (Part No.L20201324529SNK)

Ball Joint

from

$27.69
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Moog – Sway Bar Bushing (Part No.L1050425542MOG)

Sway Bar Bushing

from

$9.81
Sway Bar Bushing

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Rein – Power Steering Molded Reservoir Hose (Part No.M2033304179RIN)

Power Steering Molded Reservoir Hose

from

$23.97
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Dorman – Alignment Caster / Camber Control Arm (Part No.527-329)

Alignment Caster / Camber Control Arm

from

$602.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:
  • Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
  • Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
  • Durable construction – this part is made from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Power Steering Pressure Switch (Part No.S26769)

Power Steering Pressure Switch

from

$76.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Each of these power steering pressure switches is 100% pressure tested to ensure that the part you receive will outperform any other switch available in the aftermarket.
  • Every one of our switch connectors has been carefully crafted to ensure proper fitment, as engine management systems require reliable connections in order to reach optimum performance.
  • We proudly make this power steering pressure switch in the USA.
See More

MOOG – Caster/Camber Adjusting Kit (Part No.K80276)

Caster/Camber Adjusting Kit

from

$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Carquest Premium – Stabilizer Bar Bushing Kit (Part No.224-524137)

Stabilizer Bar Bushing Kit

from

$22.79
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Taper Bearing Cone

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Ball Joint (Part No.DW-K80647)

Ball Joint

from

$49.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

Carquest Premium – End Fittings – Straight (Part No.34819)

End Fittings - Straight

from

$9.79
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

MOOG – Stabilizer Bar Link (Part No.K750932)

Stabilizer Bar Link

from

$51.99
Backed by superior materials and rigorous testing, MOOG® sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Powercraft – Rack Pinion Seal Kit (Part No.9150)

Rack Pinion Seal Kit

from

$80.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0485)

Power Steering High Pressure Feed Assembly

from

$109.99
Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose and line assembly
  • SAE J188 compliant high pressure rubber compound hose with internal noise absorber
  • SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
  • Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
  • Pre attached protective jacket(s) and heat sleeve(s), where required
See More

Rare Parts – Cam Bolt Kit (Part No.RP71838)

Cam Bolt Kit

from

$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves vehicle handling
  • Restores OE alignment
  • Improves steering geometry
  • Easy camber adjustment
See More

Rare Parts – R & P Bellows (Part No.RP57387)

R & P Bellows

from

$23.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620511)

Control Arm and Ball Joint Assembly

from

$181.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Cardone New – Power Steering Pump (Part No.96-5366)

Power Steering Pump

from

$177.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:
  • Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
  • Meets or exceeds O.E. performance.
See More

Hitachi – Power Steering Pump Actual OE Part – New (Part No.PSP0006)

Power Steering Pump Actual OE Part - New

from

$381.99
Hitachi’s Power Steering Pumps (PSPs) are the heart of the hydraulically actuated power steering system. With a cast aluminum housing to keep weight down and machined steel internals, Hitachi’s PSPs ensure durability with high thermal efficiency. Precision machined surfaces reduce pressure loss and provide quieter operating characteristics. High strength internal components result in greater durability and efficiency. Designed to meet the exact needs of each specific vehicle, Hitachi’s Power Steering Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:
  • Hitachi is a Tier 1 OE supplier for power steering pumps
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Aluminum housing for increased weight reduction and high thermal efficiency
  • Precision machined surfaces reduce pressure loss and decrease Noise, Vibration, and Harshness (NVH)
  • High strength internal components result in greater longevity and efficiency
  • Pulley always included, O-Ring/Gaskets included when applicable
See More

Cardone – Rack and Pinion Assembly (Part No.26-3023)

Rack and Pinion Assembly

from

$522.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

PWR – New Hydraulic Power Rack and Pinion (Part No.42-1926)

New Hydraulic Power Rack and Pinion

from

$822.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:
  • PWR Rack and Pinions are 100% NEW and Engineered In North America
  • All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
  • Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
  • Includes: Factory Installed OE Mounting Bushings, Mounting Bracket, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
  • Precision Routed and Constructed Fluid Transfer Tubes
  • Manufactured to meet or exceed OE requirements
  • Engineering, test, and quality validation in the USA
See More

Dorman – Help – Power Steering Cap (Part No.99979CD)

Power Steering Cap

from

$21.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Dorman – Help – Power Steering Cap (Part No.99979)

Power Steering Cap

from

$25.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

MOOG – Caster/Camber Adjusting Kit (Part No.K100349)

Caster/Camber Adjusting Kit

from

$70.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

2011 Nissan Titan Steering and Chassis Parts

You count on your 2011 Nissan Titan to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 87 Steering and Chassis Parts ranging in price from $9.02 to $822.99, you’re sure to find everything you need for your 2011 Nissan Titan.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 21 different brands like Imperial, Cardone, and Moog. 2011 Nissan Titan Steering and Chassis Parts start as low as $9.02!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,520 extensive product reviews on 2011 Nissan Titan Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 5.0 stars and Ball Joint with 3.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2011 Nissan Titan below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2011 Nissan Titan

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Nissan Titan running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Moog, and even more.

Popular Carquest Steering and Chassis Parts

You’ll find popular Carquest brand products across Power Steering Parts. All are waiting to get your 2011 Nissan Titan back on the road. Some of the top-rated Carquest products in these categories are:
Power Steering Pressure Switch
from $76.99
(1)
Power Steering Pressure Switch
Power Steering Pressure Switches

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2011 Nissan Titan, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2011 Nissan Titan Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2011 Nissan Titan?

Out of 87 Steering and Chassis Parts for the 2011 Nissan Titan, the most popular in our inventory are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Tie Rod End
from $53.99
(7)
Tie Rod End
Tie Rod Ends
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
Power Steering Coolers

What are the top-rated 2011 Nissan Titan Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2011 Nissan Titan based on customer reviews/ratings are:
Tie Rod End
from $53.99
(5)
Tie Rod End
“Perfect fit for 05 Titan.”
Ball Joint
from $49.99
(5)
Ball Joint
“Fit perfectly. Would buy again.”
Caster/Camber Adjusting Kit
from $59.99
(4)
Caster/Camber Adjusting Kit
“Perfect fit & exactly what was needed. If you’re are rusted to the frame or are the originals = then this is definitely the way to go when doing susp”