2011 Mazda CX-7 Fuel and Emissions Systems
More 2011 Mazda CX-7 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2011 Mazda CX-7, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2011 Mazda CX-7 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Dorman – Evaporative Emissions Purge Valve (Part No.911-396)
from
$82.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Delphi – Fuel Pump Module Assembly (Part No.FG1671)
from
$433.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10508)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Bosch – Fuel Injector 62386: New (Part No.62381)
from
$52.99
Bosch Port Fuel Injectors (PFI) have a robust design and are capable of using Ethanol fuel (E100). All Bosch fuel injectors released to the aftermarket are OE fit, form and function, and are produced to OE specifications. The Bosch fuel injector has a return rate of 1 part per million (PPM), making Bosch the industry benchmark. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.
Product Features:
See More
Product Features:
- Guaranteed OE fit, form and function
- Manufactured of the highest quality materials
- Provides precision flow and original spray pattern for optimal performance
- Product includes top and bottom mounting o-ring
- Maintains new-car smoothness and drivability
Delphi – Direct Injection High Pressure Fuel Pump: With Gasket or Seal, Without Wiring Harness (Part No.HM10104)
from
$1179.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mahle – Fuel Injector O-Ring (Part No.C10131050398MAH)
from
$8.13
Fuel Injector O-Ring
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE2287)
from
$154.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1996)
from
$85.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1615)
from
$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61595)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Pierburg – Air Mass Sensor (Part No.B3150437303APG)
from
$202.84
Pierburg manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Platinum coated sensing element
- Meets or exceeds OEM specifications
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 31.50" Long, Heated, Exact Fit (Part No.234-5012)
from
$196.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1035)
from
$77.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – First Time Fit Oxygen Sensor (Part No.C5010438637ND)
from
$187.77
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.71224)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1219)
from
$8.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Motor Connector (Part No.PTA1869)
from
$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC2122)
from
$69.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC2135)
from
$79.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Pressure Sensor (Part No.0261230180)
from
$32.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Delphi – Fuel Injection Pressure Regulator (Part No.FP10530)
from
$37.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1518)
from
$48.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1519)
from
$48.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Popular 2011 Mazda CX-7 Fuel and Emissions Systems Categories
2011 Mazda CX-7 Fuel and Emissions Systems
You count on your 2011 Mazda CX-7 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 71 Fuel and Emissions Systems ranging in price from $2.39 to $1,179.99, you’re sure to find everything you need for your 2011 Mazda CX-7.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 21 different brands like Felpro, Carquest Premium, and Bosch. 2011 Mazda CX-7 Fuel and Emissions Systems start as low as $2.39!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,766 extensive product reviews on 2011 Mazda CX-7 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.0 stars and Mass Air Flow Sensor with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2011 Mazda CX-7 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2011 Mazda CX-7
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Mazda CX-7 running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Bosch, and even more.
Popular Pierburg Fuel and Emissions Systems
You’ll find popular Pierburg brand products across Fuel Injectors. All are waiting to get your 2011 Mazda CX-7 back on the road. Some of the top-rated Pierburg products in these categories are:
Top-Rated Felpro Fuel and Emissions Systems
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Fuel and Emissions Systems for your 2011 Mazda CX-7, and some of our most reviewed Felpro parts include:
FAQs for 2011 Mazda CX-7 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2011 Mazda CX-7?
Out of 71 Fuel and Emissions Systems for the 2011 Mazda CX-7, the most popular in our inventory are:
from
$61.99
This product is not rated
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal
Oxygen Sensors
What are the top-rated 2011 Mazda CX-7 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2011 Mazda CX-7 based on customer reviews/ratings are:
from
$32.99
(32)
Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“I had purchased a less expensive MotoRad cap and still had the fuel cap warning light on my dashboard. This is a much better quality cap and heavier ”
