2011 Jeep Patriot Cooling and Climate Controls

Essential 2011 Jeep Patriot Cooling and Climate Controls

Carquest Premium – Thermostat Kit: Gasket Included (Part No.86087)

Thermostat Kit: Gasket Included

from

$207.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Omix – TstatGasket (Part No.17117.30)

TstatGasket

from

$4.99
TstatGasket

Carquest Premium – A/C Block Expansion Valve (Part No.T39417)

A/C Block Expansion Valve

from

$25.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Dorman – Blower Motor Resistor Harness (Part No.645-725)

Blower Motor Resistor Harness

from

$39.99
Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.

Product Features:
  • Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application
  • Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
  • Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
  • Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – A/C Suction and Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56646)

A/C Suction and Liquid Line Hose Assembly w/o Orifice Tube

from

$167.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

KAI – Radiator Support Tie Bar (Part No.CH1225226)

Radiator Support Tie Bar

from

$94.99
New Standard Replacement Radiator Support Lower Tie Bar

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-029)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$155.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2125)

HVAC Heater Core Temperature Sensor

from

$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

Radiator Cap: 16 PSI

from

$9.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Hood Ajar Indicator Switch Connector (Part No.PTA2927)

Hood Ajar Indicator Switch Connector

from

$22.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – Engine Water Pump Gasket (Part No.36005)

Engine Water Pump Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – THERMOSTAT GASKET (Part No.35826)

THERMOSTAT GASKET

from

$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Polypropylene, 1 Pack (Part No.54201)

Engine Coolant Reservoir Cap: Flip Top, Polypropylene, 1 Pack

from

$10.49
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0094)

Engine Coolant Temperature Sensor

from

$33.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Factory Air – System Mounted Pressure Transducer (Part No.20951)

System Mounted Pressure Transducer

from

$57.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – A/C Receiver Drier, L4 Engine (Part No.ACM010781)

A/C Receiver Drier, L4 Engine

from

$78.99
New Standard Replacement A/C Receiver Drier, L4 Engine

Product Features:
  • L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-316)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$29.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56482)

A/C Suction Line Hose Assembly

from

$85.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Felpro – Engine Water Pump Gasket (Part No.35813)

Engine Water Pump Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-631)

Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$77.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Carquest Premium – A/C New; w/ Clutch; w/ 5SE12C Compressor (Part No.T158301)

A/C New; w/ Clutch; w/ 5SE12C Compressor

from

$575.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

KAI – Radiator (Part No.RAD2951)

Radiator

from

$119.99
New Platinum Pro Radiator, 1.8/2.0/2.4/2.7/3.5 Liter Engines

Product Features:
  • 1.8/2.0/2.4/2.7/3.5 Liter Engines, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C System Seal Kit, Mt2701, L4 Engine (Part No.ACX011562)

A/C System Seal Kit, Mt2701, L4 Engine

from

$38.99
New Standard Replacement A/C System Seal Kit, Mt2701, L4 Engine

Product Features:
  • Mt2701, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Multi-Purpose O-Ring (Part No.ES 72872)

Multi-Purpose O-Ring

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Omix – ABSWSS (Part No.17259.11)

ABSWSS

from

$104.99
ABSWSS

2011 Jeep Patriot Cooling and Climate Controls

You count on your 2011 Jeep Patriot to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 106 Cooling and Climate Controls ranging in price from $2.79 to $599.99, you’re sure to find everything you need for your 2011 Jeep Patriot.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 20 different brands like Permatex, Carquest Premium, and Dorman. 2011 Jeep Patriot Cooling and Climate Controls start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 5,320 extensive product reviews on 2011 Jeep Patriot Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Blower Motor: With Wheel with 4.0 stars and Electric Fan – 12" Diameter with 3.5 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2011 Jeep Patriot below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2011 Jeep Patriot

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Jeep Patriot running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Dorman, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 2011 Jeep Patriot back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 2011 Jeep Patriot, and some of our most reviewed Carquest Premium parts include:
Radiator Cap: 18 PSI
from $6.79
(118)
Radiator Cap: 18 PSI
Engine Coolant Thermostat Housing Caps
Radiator Cap: 16 PSI
from $9.79
(103)
Radiator Cap: 16 PSI
Radiator Caps
Radiator Cap: 16 PSI
from $13.49
(65)
Radiator Cap: 16 PSI
Coolant Reservoir Caps

FAQs for 2011 Jeep Patriot Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2011 Jeep Patriot?

Out of 106 Cooling and Climate Controls for the 2011 Jeep Patriot, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
HVAC Blend Door Actuator: 1 Piece
from $28.99
(42)
HVAC Blend Door Actuator: 1 Piece
Air Blend Door Actuators
Radiator Cap: 18 PSI
from $10.49
(44)
Radiator Cap: 18 PSI
Engine Coolant Thermostat Housing Caps

What are the top-rated 2011 Jeep Patriot Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2011 Jeep Patriot based on customer reviews/ratings are:
Blower Motor: With Wheel
from $144.99
(38)
Blower Motor: With Wheel
“No more squeaking from the old motor. Works great and it’s quite”
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”