2011 Hyundai Elantra Fuel and Emissions Systems
More 2011 Hyundai Elantra Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2011 Hyundai Elantra, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2011 Hyundai Elantra Fuel and Emissions Systems
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1023)
from
$92.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)
from
$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Vapor Canister (Part No.CPN1628)
from
$262.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Original Equipment – Idle Control Valve (Part No.C4030242350OEA)
from
$147.42
The Original Equipment Idle Control Valve is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1028)
from
$52.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015689973ND)
from
$129.86
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.
Product Features:
See More
Product Features:
- Tarnish-proof platinum electrodes provides longer life and maintains accuracy
- Quick-response planar zirconia element can quickly detect oxygen concentration
- Measures A/F ratios from approximately 12:1 to 19:1
- Increased performance by mapping a/f ratios throughout rpm range
- Reduces emissions by keeping the air-fuel mixture at an optimum ratio
Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA2922)
from
$86.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1195)
from
$78.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)
Carquest Premium – Alternator Connector (Part No.PTA1482)
from
$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Injector Connector (Part No.PTA1064)
from
$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Original Equipment – MAP Sensor (Part No.C7044415150OEA)
from
$111.68
Original Equipment Manifold Absolute Pressure/Manifold Air Temperature Sensors are designed to perform in harsh environments such as extreme temperatures and vibration, thermal and mechanical shock. The Original Equipment Manifold Absolute Pressure sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Designed for under-hood environments
- All-silicon, solid-state microelectronic technology
- Temperature compensation
- Electromagnetic interference (EMI) protection
- Air temperature output
Bosch – Oxygen Sensor (Part No.C5010278727BOS)
from
$185.35
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-808)
from
$68.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1336)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Pump Strainer FS2480535 (Part No.FS2480535)
from
$7.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Original Equipment – Fuel Injector O-Ring (Part No.C1012112295OEA)
from
$4.08
Fuel Injector O-Ring
Carquest – Fuel Injector – GDI – New (Part No.67894)
from
$107.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body, leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
Bosch – Turbine Electric Fuel Pump (Part No.E3000381053BOS)
from
$124.48
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.
Product Features:
See More
Product Features:
- OE-Equivalent Direct fit for easy installation.
- OE connections and fittings.
- Superior turbine pump design that virtually eliminates fuel pulsation.
- Precision, spin-balanced armature to reduce noise and vibration.
- Premium carbon brushes, utilizing advanced materials.
- Noise suppression coil that eliminates radio frequency interference.
- Illustrated step-by-step instructions are included.
Carquest – Air Charge Temperature Sensor Connector (Part No.PT5901)
from
$78.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
Felpro – Fuel Injection Idle Air Control Valve Gasket (Part No.61245)
from
$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Motorad – Tethered Fuel Cap (Part No.MGC825T)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Delphi – Fuel Injection Pressure Regulator (Part No.FP10469)
from
$56.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 2011 Hyundai Elantra Fuel and Emissions Systems Categories
2011 Hyundai Elantra Fuel and Emissions Systems
You count on your 2011 Hyundai Elantra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 82 Fuel and Emissions Systems ranging in price from $3.79 to $469.34, you’re sure to find everything you need for your 2011 Hyundai Elantra.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Carquest Premium, Felpro, and Bosch. 2011 Hyundai Elantra Fuel and Emissions Systems start as low as $3.79!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 2,972 extensive product reviews on 2011 Hyundai Elantra Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 4.1 stars and Fuel Cap with 4.5 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2011 Hyundai Elantra below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2011 Hyundai Elantra
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Hyundai Elantra running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Bosch, and even more.
Popular Dorman Fuel and Emissions Systems
You’ll find popular Dorman brand products across Vapor Canister Purge Valves. All are waiting to get your 2011 Hyundai Elantra back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated DENSO Fuel and Emissions Systems
If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Fuel and Emissions Systems for your 2011 Hyundai Elantra, and some of our most reviewed DENSO parts include:
FAQs for 2011 Hyundai Elantra Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2011 Hyundai Elantra?
Out of 82 Fuel and Emissions Systems for the 2011 Hyundai Elantra, the most popular in our inventory are:
What are the top-rated 2011 Hyundai Elantra Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2011 Hyundai Elantra based on customer reviews/ratings are:
from
$24.99
(69)
Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Price was very competitive & product works as advertised. I love shopping at Advanced Auto…great service.”
from
$17.79
(40)
Fuel Cap
“I needed a new gas cap for my 2013 kia optima. This is perfect and provided the clicks that I no longer had for my old gas cap.”
from
$49.99
(19)
Oxygen Sensor: 4 Wire, 13.66" Long, Heated, Exact Fit
“This product worked well to replace my faulty downstream O2 sensor. On my 2003 Hyundai Elantra the error code that I was getting was “Bank 1, Sensor 2”
