2011 GMC Yukon Vehicle Hoods

Essential 2011 GMC Yukon Vehicle Hoods

KAI – Hood Panel (Part No.GM1230358V)

Hood Panel

from

$524.99
New Economy Replacement Hood Panel, Will Not Fit Base Hybrid Models

Product Features:
  • Will Not Fit Base Hybrid Models, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Back Glass Lift Support: 18.06" Ext Length, 6.75" Travel, 45 Lbs of Force, 1 Pk (Part No.D4185)

Back Glass Lift Support: 18.06" Ext Length, 6.75" Travel, 45 Lbs of Force, 1 Pk

from

$11.49
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

Stabilus – Gas Charged Hatch Strut (Part No.O2070372636STB)

Gas Charged Hatch Strut

from

$21.76
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

StrongArm – Liftgate Lift Support: 24.69" Ext Length, 9.0" Travel, 130 Lbs of Force, 1 Pk (Part No.C4557)

Liftgate Lift Support: 24.69" Ext Length, 9.0" Travel, 130 Lbs of Force, 1 Pk

from

$13.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

StrongArm – Back Glass Lift Support: 16.25" Ext Length, 4.25" Travel, 85 Lbs of Force, 1 Pk (Part No.D4190)

Back Glass Lift Support: 16.25" Ext Length, 4.25" Travel, 85 Lbs of Force, 1 Pk

from

$27.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

Atlas Lift – Lift Support (Part No.LS10078)

Lift Support

from

$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Dorman – Ford, GM Fender Retainer (Part No.961-366D)

Ford, GM Fender Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Hood Molding (Part No.GM1235106)

Hood Molding

from

$49.99
New Standard Replacement Hood Molding

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – OE Solutions Hood Release Cable (Part No.O2030703420DOR)

OE Solutions Hood Release Cable

from

$55.72
Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:
  • Comes with handle (where applicable)
  • Direct replacement for a proper fit every time
  • Durably designed to resist breakage
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dorman – Hood Release Cable With Handle (Part No.912-014)

Hood Release Cable With Handle

from

$76.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Hood Release Cable (Part No.O2030703236DOR)

Hood Release Cable

from

$94.99
Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:
  • Comes with handle (where applicable)
  • Direct replacement for a proper fit every time
  • Durably designed to resist breakage
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dorman – OE Solutions Hood Release Cable (Part No.O2030703240DOR)

OE Solutions Hood Release Cable

from

$76.91
Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:
  • Comes with handle (where applicable)
  • Direct replacement for a proper fit every time
  • Durably designed to resist breakage
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dorman – Hood Release Cable With Handle (Part No.912-176)

Hood Release Cable With Handle

from

$49.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Hood Release Cable With Handle (Part No.912-017)

Hood Release Cable With Handle

from

$67.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

KAI – Hood Hinge (Part No.GM1236109)

Hood Hinge

from

$7.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236128)

Hood Hinge

from

$11.99
New Standard Replacement Passenger Side Hood Hinge Assembly, Body Mounted

Product Features:
  • Body Mounted, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236110)

Hood Hinge

from

$7.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236111)

Hood Hinge

from

$9.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236162)

Hood Hinge

from

$14.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1244108)

Hood Hinge

from

$33.99
New Standard Replacement Driver Side Hood Hinge Assembly, Body Mounted

Product Features:
  • Body Mounted, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236127)

Hood Hinge

from

$11.99
New Standard Replacement Passenger Side Hood Hinge, Hood Mounted

Product Features:
  • Hood Mounted, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236112)

Hood Hinge

from

$9.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236163)

Hood Hinge

from

$14.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236108)

Hood Hinge

from

$13.99
New Standard Replacement Passenger Side Hood Hinge Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1236107)

Hood Hinge

from

$13.99
New Standard Replacement Driver Side Hood Hinge Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GM1245108)

Hood Hinge

from

$33.99
New Standard Replacement Passenger Side Hood Hinge Assembly, Body Mounted

Product Features:
  • Body Mounted, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

2011 GMC Yukon Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 2011 GMC Yukon. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 17 different Vehicle Hoods in our inventory ranging from $4.49 to $524.99. That means you can find the exact parts or products you need to keep that 2011 GMC Yukon running smoothly.

Vehicle Hoods are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2011 GMC Yukon. StrongArm, KAI, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 2011 GMC Yukon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 2011 GMC Yukon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 2011 GMC Yukon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 GMC Yukon demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.

Popular StrongArm Vehicle Hoods

We carry StrongArm parts in our stock across Lift Supports categories, plus more. For a 2011 GMC Yukon, our most popular StrongArm Vehicle Hoods include:

FAQs for 2011 GMC Yukon Vehicle Hoods

What are the most purchased Vehicle Hoods for the 2011 GMC Yukon?

Out of 17 Vehicle Hoods for the 2011 GMC Yukon, the most popular in our inventory are:
Hood Molding
from $49.99
This product is not rated
Hood Molding
Hood Moldings
Ford, GM Fender Retainer
from $4.49
This product is not rated
Ford, GM Fender Retainer
Hood Insulation Pads
Lift Support
from $29.99
This product is not rated
Lift Support
Lift Supports