2011 GMC Yukon Drivetrains
More 2011 GMC Yukon Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2011 GMC Yukon, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2011 GMC Yukon Drivetrains
Dorman – Remanufactured Transfer Case Control Module (Part No.599-114)
from
$339.99
Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models
- Effective fix – replacement restores transfer case motor control and addresses trouble codes
- Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Dorman – Four Wheel Drive Actuator (Part No.600-100)
from
$91.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10059)
from
$141.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More
USA Standard Gear – Standard Spider Gear Set For 33 Spline GM 9.5" And Pre ’06 GM 9.25IFS (Part No.39029)
from
$214.99
Product Features:
See More
- Spider gear kit
- Fits GM 9.5″ open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)
from
$4.99
8.6″ GM standard Open side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 8.6″
Spartan – Drive Axle Assembly; GM SUV 05-06 RWD Axle GU6 (Part No.RAXP2176A)
from
$1931.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.
Product Features:
See More
Product Features:
- Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
- Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
- Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
- Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Spider Gear Set For GM 9.5" Gura Drip Posi (Part No.16166)
from
$561.99
Yukon spider gear set for GM 9.5″ Gura Drip posi. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 9.5″ with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)
from
$59.99
Product Features:
See More
- Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
- Interlocking design makes installation much easier
Motive Gear – Differential Bearing Kit – Timken (Part No.R8.2RIFSLT)
from
$136.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 8.25IFS TIMKEN BRG KIT ’98-ON
Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)
from
$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Differential Cover B (Part No.33569)
from
$5.99
Differential Cover B
EVO Driveline – Transfer Case Assembly (Part No.UMT141-7)
from
$1921.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Yukon Gear – Standard Open Carrier Case, GM 9.5" & 9.25" IFS, Loaded (Part No.20097)
from
$629.99
9.25″ IFS & 9.5″ case standard Open, loeaded.
Product Features:
See More
Product Features:
- Standard open carrier case and spiders
- Fits GM 9.25″ IFS and 9.5″
Motive Gear – Differential Pinion Shim Kit (Part No.1102)
Richmond Gear – Differential Gear Install Kit (Part No.83-1026-B)
from
$39.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Axle Shaft (Part No.21824)
from
$278.99
Axle Shaft
Dorman – Transfer Case Gasket (Part No.917-562)
from
$11.99
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
- Effective fix – restores a tight seal in the transfer case after original gasket fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Dorman – 4 Wheel Drive Oil Seal (Part No.600-606)
from
$34.99
This axle differential seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle differential seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1541H Alloy Rear Axle For GM 8.6" (03-05′ With Disc & ’06-’07 Trucks With Drum Brakes) (Part No.21573)
from
$298.99
Yukon 1541H alloy rear axle for GM 8.6″ (03-05′ with disc & ’06-’07 trucks with drum brakes) with a length of 33 9/16″, 6 lugs and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 2003-2005 GM half ton truck with disc brakes and 2006-2007 with drum brakes
- 30 spline
- 33 9/16″ long
- 6 lug
Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)
from
$373.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Composite clutches
ATP – DIFF COVER KIT (Part No.111107)
from
$52.99
DIFF COVER KIT
Dorman – 4WD Differential Housing – Front (Part No.600-211)
from
$472.99
This differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication, or damaged internal components. It is made of durable materials for reliable service..
Product Features:
See More
Product Features:
- Ideal solution – this differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication or damaged internal components.
- Exact fit – matches the fit, function and performance of the original differential housing on specified vehicles
- Durable construction – the housing and its internal components are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2011 GMC Yukon Drivetrains Categories
2011 GMC Yukon Drivetrains
You count on your 2011 GMC Yukon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 396 Drivetrains ranging in price from $2.49 to $2,424.99, you’re sure to find everything you need for your 2011 GMC Yukon.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 27 different brands like Valvoline, Moog, and Carquest Premium. 2011 GMC Yukon Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,248 extensive product reviews on 2011 GMC Yukon Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and 4WD Actuator, Front Axle with 4.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2011 GMC Yukon below to get started!
Top-Rated Drivetrains Brands For Your 2011 GMC Yukon
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 GMC Yukon running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Carquest Premium, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 2011 GMC Yukon back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2011 GMC Yukon, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2011 GMC Yukon Drivetrains
What are the most purchased Drivetrains for the 2011 GMC Yukon?
Out of 396 Drivetrains for the 2011 GMC Yukon, the most popular in our inventory are:
What are the top-rated 2011 GMC Yukon Drivetrains?
Top-rated Drivetrains for your 2011 GMC Yukon based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
