2011 Ford F53 Ignition Coils and Boots

Essential 2011 Ford F53 Ignition Coils and Boots

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count (Part No.EBC1519-8)

Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count

from

$268.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005411034WSO)

Direct Ignition Coil - (Coil on Plug)

from

$38.88
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:
  • OE-Equivalent and a direct fit application
  • Superior, reliable performance compared to competitive products
  • Lower cost alternative to original equipment
  • No additional time consuming steps needed for installation
  • Factory original equipment connectors
  • Improved coil efficiency reduces the need to generate excessive high voltage
  • Designed to provide durability and performance
  • Noise abatement technology to eliminate audible coil noise
  • Lower primary inductance provides high-speed performance
  • Maximum available voltage under all operating conditions
  • TS 16949 Certification
See More

Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005178371DEL)

Direct Ignition Coil - (Coil on Plug)

from

$66.46
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI)suppressor optional
See More

Delphi – IGNITION COIL (Part No.GN10233)

IGNITION COIL

from

$61.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

DENSO – First Time Fit Direct Ignition Coil – (Coil on Plug) (Part No.F3005748955ND)

First Time Fit Direct Ignition Coil - (Coil on Plug)

from

$86.93
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48874)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$64.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Edelbrock – COIL ON PLUG (Part No.22781)

COIL ON PLUG

from

$229.99
COIL ON PLUG

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1001)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$55.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-521)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$73.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:
  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
See More

DENSO – Coil On Plug Boots-8 (Part No.671-8110)

Coil On Plug Boots-8

from

$62.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

DENSO – Coil On Plug Boots-10 (Part No.671-0010)

Coil On Plug Boots-10

from

$99.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle/HEI; Universal (Part No.31183)

Wire Set; Black Super Conductor; 8-cyl. Multi-Angle/HEI; Universal

from

$143.99
For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [8] 90 Degree Boots/Terminal Ends
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Black Super Conductor; Universal 8-cyl.; 90f Plug/90f Plug (Part No.31223)

Wire Set; Black Super Conductor; Universal 8-cyl.; 90f Plug/90f Plug

from

$129.99
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Incl. Mini-Stripper-Crimper
See More

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug

from

$129.99
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Incl. Mini-Stripper-Crimper
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-002FMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$48.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

8Mm Super Stock Spiral Uni Rd

from

$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8179)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Autopart International Inc – Direct Ign. Coil Boo (Part No.F30061967136API)

Direct Ign. Coil Boo

from

$10.84
Direct Ign. Coil Boo

DENSO – Coil On Plug Boots-10 (Part No.671-0001)

Coil On Plug Boots-10

from

$99.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Motorcraft – Ignition Wire Set (Part No.F1020361156MTR)

Ignition Wire Set

from

$70.12
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:
  • OEM quality
  • OEM connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Reduces the chance of misfire
  • Increases engine life
  • Protects against wire set failure
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7087)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$11.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 8 Wires (Part No.WR-4110)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 8 Wires

from

$95.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7006)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$8.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Karlyn – Karlyn Ignition Wire Set (Part No.F1020232003KAR)

Karlyn Ignition Wire Set

from

$60.66
The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Resistant to high temperatures, corrosion and vibration.
  • Ignition noise suppressed.
  • Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required
See More

DENSO – Coil On Plug Boots-10 (Part No.671-0007)

Coil On Plug Boots-10

from

$68.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-006FMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$47.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Motorcraft – Direct Ignition Coil Boot (Part No.F3006412382MTR)

Direct Ignition Coil Boot

from

$11.56
The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • OES replacement part for your vehicle’s original factory component
  • Offering the quality, reliability, and durability of OES
  • Manufactured to OES specification for fit, form, and function
See More

ACDelco – Professional Direct Ignition Coil Boot (Part No.F3006612478ACD)

Professional Direct Ignition Coil Boot

from

$10.02
Designed to be an ideal replacement for your vehicle’s worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget. ACDelco meet or exceed most original manufacturers’ specifications. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Professional, premium aftermarket Direct Ignition Coil-on-Plug Boots seal snugly against the spark plug’s insulator, keeping moisture and contaminates out and promoting longer spark plug life. They are thoroughly engineered to meet or exceed your expectations for fit, form, and function. ACDelco Professional Direct Ignition Coil-on-Plug Boots provide the performance and dependability you expect from ACDelco.

Product Features:
  • Weather tight boot seal for protection against moisture intrusion
  • High temperature resistant silicone for protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the spark plug
  • Premium, high-quality aftermarket spark plug boot Signs that you might need to replace your direct ignition coil-on-plug boot are:
  • Engine will not start or run
  • Reduced Power
  • Excessive tailpipe emissions
  • Check Engine Light is on
  • Engine misfire
  • Reduced fuel economy
See More

2011 Ford F53 Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 2011 Ford F53. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 16 different Ignition Coils and Boots in our inventory ranging from $11.49 to $268.99. That means you can find the exact parts or products you need to keep that 2011 Ford F53 running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Ford F53. Carquest Premium, Motorcraft, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 2011 Ford F53, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2011 Ford F53 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 2011 Ford F53 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Ford F53 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your F53 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

FAQs for 2011 Ford F53 Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 2011 Ford F53?

Out of 16 Ignition Coils and Boots for the 2011 Ford F53, the most popular in our inventory are:
Ignition Coil: Meets OE Specifications, 1 Count
from $35.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $45.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Coil on Plug Coil
from $43.05
This product is not rated
Coil on Plug Coil
Ignition Coils