2011 Ford F-150 Exhaust System Kits

Essential 2011 Ford F-150 Exhaust System Kits

Felpro – EXHAUST FLANGE BOLT & SPRING KIT (Part No.ES 72142)

EXHAUST FLANGE BOLT & SPRING KIT

from

$18.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75122)

Exhaust Manifold Hardware Kit

from

$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Designed and manufactured to meet the needs of the exhaust system repair environment.
  • Verified, tested and certified proprietary Organic coating resists corrosion.
  • Tightly controlled coefficient of friction ensures reliable installation.
  • Application specific kit contents
  • Self-locking nuts (where applicable).
See More

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75115)

Exhaust Manifold Hardware Kit

from

$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Designed and manufactured to meet the needs of the exhaust system repair environment.
  • Verified, tested and certified proprietary Organic coating resists corrosion.
  • Tightly controlled coefficient of friction ensures reliable installation.
  • Application specific kit contents
  • Self-locking nuts (where applicable).
See More

Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm Stainless Steel (Part No.03411HP)

Exhaust Manifold Mount Hardware - M8-1.25mm Stainless Steel

from

$26.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Upgraded hardware – this set of ten M8-1.25 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
  • Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In. (Part No.03411)

Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In.

from

$16.29
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75125)

Exhaust Manifold Hardware Kit

from

$45.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-43043-P)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP

from

$929.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 3 in. Mandrel Bent 409 Stainless Steel Tubing
  • Maximum Flow
  • Hassle Free Installation
  • Free Flow Muffler
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15461)

Street Series Cat-Back Performance Exhaust System

from

$1167.99
The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15461 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15461 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – Cat-Back Exhaust System – S-Type (Part No.140618BC)

Cat-Back Exhaust System - S-Type

from

$1531.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-43041-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$1103.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 4 in. Mandrel Bent Stainless Steel Tubing
  • Hassle Free Installation
  • Free Flow Muffler
  • Aggressive Sound
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-43041-P)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP

from

$1031.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 4 in. Cat-Back System
  • Hassle Free Installation
  • Free-Flow Muffler
  • Aggressive Sound
See More

aFe POWER – ATLAS DPF Back Exhaust System: Polished Tip, Aluminized Steel, Unleashes All Available HP (Part No.49-03106-P)

ATLAS DPF Back Exhaust System: Polished Tip, Aluminized Steel, Unleashes All Available HP

from

$394.99
aFe POWER ATLAS Exhaust System is constructed out of mandrel-bent aluminized steel tubing and produce optimum flow and an aggressive sound. This system is perfect combination of performance, fit and value. Quality OE style flange and band clamps are used for a complete 360 degree sealing surface. A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip locks into the hanger bushing for an OE style fit that does not change with time. Includes an extension pipe to fit multiple cab configuration and uses factory mounting locations, providing stability and hassle-free installation.

Product Features:
  • Best Combination of Performance, Fit, and Value
  • Includes Stainless Steel High-Flow Muffler
  • Mandrel-Bent Tubing for Improved Flow
  • OE-style flanges and Stainless Clamps for Improved Sealing Surface
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15460)

Street Series Cat-Back Performance Exhaust System

from

$1167.99
The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15460 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15460 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: No Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-33095)

MACH Force-Xp Cat Back Exhaust System: No Tip, 304 Stainless Steel, Unleashes All Available HP

from

$2130.99
aFe is proud to introduce the MACH Force-Xp “Hi-Tuck” Cat-Back exhaust system for the Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3″ into 3-1/2″ mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an “Old School” traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24″ length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4″ Tips: Finishing off this system are dual 4″ diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • Mandrel Bent Stainless Steel Tubing
  • Round Muffler
  • Dual Y-Merge Assemblies For Enhanced Tone
  • Dual RAW 304 Stainless Steel Tips
See More

MBRP Exhaust – Installer Series, 3 In Cat Back System: Polished Tip, Aluminized Steel, Designed for Power and Sound (Part No.S5262AL)

Installer Series, 3 In Cat Back System: Polished Tip, Aluminized Steel, Designed for Power and Sound

from

$525.99
Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system.

Product Features:
  • Built To Perform: Performance Exhaust Systems Are Built To Perform. Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
  • Dyno Proven: Undergone Countless Hours On Our In House Mustang 1100 AWD SE Chassis Dynamometer, Hundreds Of Miles On Road And Track And Numerous Tweaks And Modifications
  • From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Hence The System Gets Exhaust Out Fast
  • Performance Exhaust System Is The Starting Point To Getting The Most From Cold Air Intakes, Programmers, Modules And Downloaders
  • Sound And Style: Every Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Your Pickup
  • Direct Fit To The OEM Hangers
  • Easy Installation: Systems Are As Much Fun To Install As To Drive With On Your Truck. Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
  • Limited 3 Year Warranty
See More

JBA Performance – 40-2537 3" Stainless Steel Exhaust System 2010-14 Ford Raptor 3" Dual Side Exit (Part No.40-2537)

40-2537 3" Stainless Steel Exhaust System 2010-14 Ford Raptor 3" Dual Side Exit

from

$629.99
When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:
  • JBA Performance Exhaust 40-2537 3″ Stainless Steel Exhaust System 2010-14 Ford Raptor 3″ Dual Side Exit
  • Large diameter stainless steel mandrel-bent tube
See More

MagnaFlow – Street Series Filter-Back Performance Exhaust System (Part No.19422)

Street Series Filter-Back Performance Exhaust System

from

$551.99
The MagnaFlow Ford F-150 Street Series 19422 has been designed from the ground up to make your 3.0L 2018-2020 Ford F-150 sound like and haul like it should thanks to its heavily dyno-tested, durable and corrosion resistant stainless steel design. This Ford F-150 exhaust kit is tuned to produce Moderate exterior and Mild interior sound levels through its fast-flowing, mandrel bent 4in. main piping and is compatible with 3.0L engines. The system terminates in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tip. Exhaust kit 19422 is tuned to produce our powerful, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. It does this with a filter-back layout that replaces your diesel truck¿s stock exhaust system from the particulate filter on back. Extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design. Once you hit the road or trail with this exhaust system hooked up your rig will stand out from the rest as the truest of trucks. 19422 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow¿s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – Rebel Series Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 15 HP (Part No.49-43078-P)

Rebel Series Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 15 HP

from

$1103.99
aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for 2011-2014 Ford F150 EcoBoost with V6-3.5L (tt) engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with a unique aFe Power logo laser etched on the side and constructed from stainless steel for durability. The exhaust system is constructed from 3″ into dual 2-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, this cat-back exhaust system added an astounding +15 horsepower and +18 lbs. x ft. of torque as verified by our in house dyno. This kit uses an 18″ free-flowing muffler to absorb high pitch tones producing a powerful sound, virtually eliminating drone. The performance cat-back exhaust system includes all necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

Product Features:
  • +18 ft. x lbs. TQ & +15 HP
  • Unique Dual Same Side Tips Exit From Pass. Side
  • Includes A High-Flow 18 in. Stainless Steel Muffler
  • 3 in. Into Dual 2.5 in. MIG-Welded Mandrel Bent Tubing
See More

JBA Performance – 40-2527 3" Stainless Steel Exhaust System 2010-14 Ford Raptor (Part No.40-2527)

40-2527 3" Stainless Steel Exhaust System 2010-14 Ford Raptor

from

$441.99
When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:
  • JBA Performance Exhaust 40-2527 3″ Stainless Steel Exhaust System 2010-14 Ford Raptor
  • Large diameter stainless steel mandrel-bent tube
See More

aFe POWER – Large Bore-HD DPF Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-43106-B)

Large Bore-HD DPF Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$529.99
aFe POWER Large Bore-HD exhaust system is designed to provide increased exhaust flow and performance. Constructed from mandrel-bent stainless steel tubing, this exhaust system offers performance across the power band and delivers a deep, aggressive exhaust tone. This system utilizes a less-restricting, high-flow muffler to improve performance. 100% hand MIG-welded by certified craftsmen for proven quality and durability.

Product Features:
  • Constructed from Stainless Steel Tubing for Strength and Durability
  • Utilizes OE-style Bayonet Hangers for a Secure Fit
  • Mandrel-Bent Tubing for Smooth Transitions and Increased Power
  • Stainless Clamps for Improved Sealing Surface
See More

MBRP Exhaust – Black Ss, 2.5"Dia Pipe, Single Exhaust With Dual Split Rear Exit, With Steel Tip (Part No.S5258BLK)

Black Ss, 2.5"Dia Pipe, Single Exhaust With Dual Split Rear Exit, With Steel Tip

from

$964.99
Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to. MBRPs performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your truck will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Your MBRP performance gas exhaust system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynamometer, hundreds of miles on road and track and numerous tweaks and modifications to get the most out of your truck. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need. Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our stamped logo on the tip and our unmistakable styling, there is no question that you have the hottest performance exhaust on the road – MBRP.

Product Features:
  • Built To Perform Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
  • Dyno Proven From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your MBRP Performance System Gets Exhaust Out Fast
  • Sound And Style Every MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Your Pickup
  • Easy Installation Bolt-On, No Weld Design Makes Installation A No Hassle One
See More

JBA Performance – 40-2528 3" Stainless Steel Exhaust System 2011-2014 Ford F-150 5.0L & 3.5L EcoBoost (Part No.40-2528)

40-2528 3" Stainless Steel Exhaust System 2011-2014 Ford F-150 5.0L & 3.5L EcoBoost

from

$439.99
When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:
  • JBA Performance Exhaust 40-2528 3″ Stainless Steel Exhaust System 2011-2014 Ford F-150 5.0L & 3.5L EcoBoost
  • Large diameter stainless steel mandrel-bent tube
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 9 HP (Part No.49-43074-P)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 9 HP

from

$1450.99
aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.

Product Features:
  • 3 in. Mandrel Bent Stainless Steel
  • 100% Hand TIG Welded
  • Leak Free Seal
  • Aggressive Sound
See More

Borla Performance Exhaust – Stainless Steel Exhaust Pipe Adapter (Part No.60556)

Stainless Steel Exhaust Pipe Adapter

from

$72.99
Along with the distinctive Borla Sound of Power recognized by motoring enthusiasts everywhere, upgrading your ride with a Borla exhaust gives you a boost in power and torque, improved fuel economy, longer engine life and refined motorsport styling. But most of all, Borla gives you the intoxicating rush that comes with every squeeze of the throttle, the thrill of raging power with every shift, and a heart-pounding soundtrack to match. More than anything else, we understand that we build far more than exhaust systems. We build excitement. Borla is proud to offer a true Made in the USA product sold around the world. Borla products are constructed using T-304 stainless steel for long life and sharp appearance and feature all welded construction for maximum durability. Everything weve learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities. Everywhere you look, Borlas spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems. For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar. Unlike any other exhaust brand, Borlas systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.

Product Features:
  • High quality at an affordable price
  • Expertly made from premium materials
  • Built to match your exact requirements
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-43015-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$1031.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 3 in. Mandrel Bent 409 Stainless Steel Tubing
  • Hassle Free Installation
  • Free Flow Muffler
  • Aggressive Sound
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19577)

Street Series Cat-Back Performance Exhaust System

from

$1132.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System #19577 for all 2015-2023 Ford F-150s offers a straightforward way to enhance the sound and performance of your truck with MagnaFlow¿s deep signature sound and dyno-proven performance. This MagnaFlow exhaust kit features 4¿ mandrel bent tubing, a single straight-through muffler and single passenger-side exit with 5¿ polished tip. MagnaFlow #19577 is engineered to produce a moderate level of sound on the exterior and mild, well-mannered sound volume in the interior. The quality construction of this Ford F-150 exhaust system is thanks to the durable stainless-steel material it is made of, as well as the cutting-edge CNC precision robotic manufacturing techniques that were utilized to produce it. Each exhaust kit is covered by a limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19506)

Street Series Cat-Back Performance Exhaust System

from

$1268.99
The MagnaFlow 2015-2020 Ford F-150 Street Series Cat-Back Performance Exhaust System 19506 brings out the personality of your 5.0L 2015-2020 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Black Coated Clamp-On Double Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19506 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19506 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – T-304 Ss, With Muffler, 3" To 2.25" Pipe Dia, Single Exhaust With Dual Exit (Part No.140616BC)

T-304 Ss, With Muffler, 3" To 2.25" Pipe Dia, Single Exhaust With Dual Exit

from

$1379.99
BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup and unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.

Product Features:
  • Designed For High-Performance
  • Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
  • Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
  • ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores
See More

2011 Ford F-150 Exhaust System Kits

Maybe you’re in the middle of a full rebuild of that 2011 Ford F-150. Maybe you just need a couple of Exhaust System Kits. Either way, Advance Auto Parts has 26 different Exhaust System Kits in our inventory ranging from $45.99 to $1,477.99. That means you can find the exact parts or products you need to keep that 2011 Ford F-150 running smoothly.

Exhaust System Kits are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Ford F-150. MBRP Exhaust, aFe POWER, and Corsa Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Exhaust System Kits for your 2011 Ford F-150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Exhaust System Kits to keep your 2011 Ford F-150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Exhaust System Kits Brands To Make Your 2011 Ford F-150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Ford F-150 demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust System Kits make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 the best it can be. Be sure to browse some of our top Exhaust System Kits brands and parts.

FAQs for 2011 Ford F-150 Exhaust System Kits

What are the most purchased Exhaust System Kits for the 2011 Ford F-150?

Out of 26 Exhaust System Kits for the 2011 Ford F-150, the most popular in our inventory are:
P Series, 3 In Cat Back System: No Tip, Aluminized Steel, Designed for Power and Sound
from $344.99
This product is not rated
P Series, 3 In Cat Back System: No Tip, Aluminized Steel, Designed for Power and Sound
Exhaust System Kits
Off-Road Pro Series Cat-Back Performance Exhaust System
from $707.99
This product is not rated
Off-Road Pro Series Cat-Back Performance Exhaust System
Exhaust System Kits