2011 Ford Explorer Steering and Chassis Parts
Find Your Specific 2011 Ford Explorer Steering and Chassis Parts
Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2011 Explorer. Advance Auto Parts has popular Explorer parts like Tie Rods, Power Steering Parts, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Explorer model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2011 Ford Explorer Steering and Chassis Parts below and start saving instantly.
Popular 2011 Ford Explorer Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2011 Ford Explorers
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-221)
from
$96.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Rare Parts – Rack & Pinion Bellows (Part No.RP57344)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Dorman – Knuckle (OE Fix) (Part No.698-282)
from
$444.99
When an original equipment wheel hub assembly is due for replacement on certain Ford vehicles, the job can become difficult because rust has grown between the surfaces of the steering knuckle and the wheel hub bearing, ultimately resulting in the two assemblies seizing together. Although this problem is common in Salt Belt regions, it can also occur over time under normal vehicle use and when it does it can make the knuckle challenging or impossible to salvage. This Dorman OE FIX steering knuckle features a patented and proprietary coating that helps prevent corrosion between surfaces, providing a more permanent and reliable repair than the factory knuckle design.
Product Features:
See More
Product Features:
- Improved design – this steering knuckle has a proprietary coating that helps prevent rust forming between surfaces, providing a more permanent and reliable repair than the OE knuckle design
- Direct replacement – engineered to match the performance of the original equipment steering knuckle
- Location-specific – designed for the front right side of specified Ford vehicles
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Intermediate Steering Shaft (Part No.425-338)
from
$436.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Dorman – Sway Bar Kit (Part No.927-223)
from
$223.99
Product Features:
See More
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Dorman – Sway Bar Kit (Part No.927-148)
from
$143.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
MOOG – Rack And Pinion Mount Bushing (Part No.K202151)
from
$60.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – R & P Mounting Bushing (Part No.RP16530)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Insulates Rack & Pinion from Frame.
- Stabilizes Rack & Pinion
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-531)
from
$18.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Stabilizer Bar Bushing (Part No.533-579)
from
$31.99
This suspension stabilizer bar bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Daystar – Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (Part No.KU13001BK)
from
$15.99
Ties rods and ball joints are important components in the overall suspension equation, yet they are supplied with inferior rubber boots that deteriorate and tear over time. Replacing them with Daystar Dust Boots will increase the durability and longevity of these important suspension components. Unless otherwise stated, they are offered in universal applications so have the stud and overall joint diameters on hand.
Product Features:
See More
Product Features:
- Durable Polyurethane Material
- Keeps Out Dust
- Made In USA
- Easy To Install
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K80081)
from
$27.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Sway Bar Link (Part No.RP18586)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1012)
from
$36.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
PWR – New Hydraulic Power Rack and Pinion (Part No.42-1114)
from
$1011.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Carquest Premium – New Power Steering Rack & Pinion – Hydraulic (Part No.101-0221CQN)
from
$939.99
Premium-quality new power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
- Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
- All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
- Rack teeth and pinion gears are machined for smooth operation, which guarantees correct steering feel and performance
Driveworks – Steering Tie Rod End (Part No.DW-ES3302RL)
from
$23.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Driveworks – Tie Rod End, 1 Each Drive (Part No.DW-ES80786)
from
$32.99
Tie Rod End, 1 Each Drive
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$9.99
Camber Bolt Kit
MOOG – Suspension Stabilizer Bar Link (Part No.K750393)
from
$58.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL: Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT: Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE: Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS: Made from premium materials for long-lasting dependability
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Suspension Stabilizer Bar Link (Part No.K750394)
from
$58.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL: Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT: Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE: Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS: Made from premium materials for long-lasting dependability
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Alignment Camber Kit (Part No.K100024)
from
$29.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Camber Kit (Part No.K100383)
from
$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- This kit replaces the outer bolt of the upper
- Allows for Camber adjustment
- Adjustment Range: +/- 0.75 Degrees
- Easy to install
- Construction and design validated by MOOG engineers
MOOG – Alignment Camber Kit (Part No.K80112)
from
$54.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)
from
$31.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Heavy-duty power steering oil cooler
- Size: 3/4″ x 5″ x 9-1/4″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and helps prolong power steering system life
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)
from
$32.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Medium-duty power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 12″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and helps prolong power steering system life
Upgrade your 2011 Ford Explorer with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Steering and Chassis Parts for the 2011 Ford Explorer, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Power Steering Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2011 Ford Explorer at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $9.99 to $1,021.99, with
an average price of $142.97.
Our 44 Steering and Chassis Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2011 Ford Explorer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ford Explorer, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog, and more.
Moog Steering and Chassis Parts
start at just $21.49 and boast an impressive 4.5 stars average rating from customers.
With 297 customer reviews and counting, our 2011 Ford Explorer Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place.
Start shopping confidently below for your 2011 Ford Explorer!
Best-Selling Tie Rods for 2011 Ford Explorers
Enhance the driving experience in your Ford with 6 quality Tie Rod components, starting at $15.99.
Carquest Premium – Tie Rod End (Part No.700-498330)
from
$29.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
MOOG – Tie Rod End (Part No.ES800952)
from
$90.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Steering Tie Rod End (Part No.EV800893)
from
$80.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Rack & Pinion Tie Rod End (Part No.RP29430)
from
$124.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Carquest Premium – TIE ROD END (Part No.310-18035)
from
$25.99
TIE ROD END
Daystar – Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (Part No.KU13001BK)
from
$15.99
Ties rods and ball joints are important components in the overall suspension equation, yet they are supplied with inferior rubber boots that deteriorate and tear over time. Replacing them with Daystar Dust Boots will increase the durability and longevity of these important suspension components. Unless otherwise stated, they are offered in universal applications so have the stud and overall joint diameters on hand.
Product Features:
See More
Product Features:
- Durable Polyurethane Material
- Keeps Out Dust
- Made In USA
- Easy To Install
Most Popular 2011 Ford Explorer Power Steering Parts
Customize your Ford with 6 Power Steering Parts products
like Rack & Pinions,
Power Steering Coolers, and
Rack and Pinion Boots, all
priced under $1,021.99.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1012)
from
$36.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.1A-2008CQ)
from
$1021.99
Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
- Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
- Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
- All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE
Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.201-0154ECQ)
from
$985.99
Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
- Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
- Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
- All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE
MOOG – Rack And Pinion Mount Bushing (Part No.K202151)
from
$60.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Rack & Pinion Bellows (Part No.RP57344)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Top Picks for 2011 Ford Explorer Ball Joints
Upgrade Ford Explorers with top-quality Ball Joints parts, including 8 OEM and aftermarket selections for your 2011 model.
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622215)
from
$221.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HARDENED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKETá-Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622216)
from
$221.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HARDENED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKETá-Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
Carquest Premium – Lower Control Arm with Ball Joint: Front Right (Part No.810-498327B)
from
$305.99
Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Application specific, direct fitment for trouble-free installation
- Corrosion-resistant coating on steel control arms to reduce rust and extend service life
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included on many applications for easier installation
Carquest Premium – Control Arm with Ball Joint: Front Left (Part No.810-498328B)
from
$305.99
Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Application specific, direct fitment for trouble-free installation
- Corrosion-resistant coating on steel control arms to reduce rust and extend service life
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included on many applications for easier installation
MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.CK622216)
from
$203.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKETá- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.CK622215)
from
$203.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
- GREASEABLE SOCKETá- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
Dorman – Suspension Control Arm and Ball Joint Assembly (Part No.520-785)
from
$132.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm and Ball Joint Assembly (Part No.520-786)
from
$132.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
In-Demand Steering Shafts for 2011 Ford Explorers
Select from 1 premium Steering Shafts parts for your 2011 Ford Explorer.
Dorman – Intermediate Steering Shaft (Part No.425-338)
from
$436.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Most Sold 2011 Ford Explorer Sway Bars
Explore our best-selling Ford parts for the 2011 Explorer among 15 OEM and aftermarket options starting from $15.99.
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200520)
from
$21.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS: Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Front Right Suspension Stabilizer Bar Link (Part No.K750616)
from
$53.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Suspension Stabilizer Bar Link (Part No.K750394)
from
$58.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL: Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT: Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE: Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS: Made from premium materials for long-lasting dependability
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Suspension Stabilizer Bar Link (Part No.K750393)
from
$58.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL: Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT: Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE: Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS: Made from premium materials for long-lasting dependability
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498326)
from
$47.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498325)
from
$47.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Stabilizer Bar Link (Part No.512-322418)
from
$55.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
MOOG – Front Left Suspension Stabilizer Bar Link (Part No.K750617)
from
$53.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Carquest Premium – Stabilizer Bar Link (Part No.512-322419)
from
$55.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Link (Part No.RP22328)
from
$96.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP22327)
from
$93.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Frame Bushing (Part No.RP22002)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP19921)
from
$124.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP19922)
from
$50.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Carquest Premium – Sway Bar Bushing (Part No.224-18027)
from
$15.99
Carquest Premium sway bar bushings are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
Top-Rated Steering and Chassis Parts Brands For Your 2011 Ford Explorer
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2011 Ford Explorers. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, and more. Steering and Chassis Parts from these brands that fit a 2011 Explorer start at just $21.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2011 Ford Explorer Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Ford Explorer, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2011 Ford Explorer. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.49, with an average price of just $28.16. Plus, with over 8 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2011 Ford Explorer Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2011 Ford Explorers?
Out of 44 Steering and Chassis Parts that fit 2011 Ford Explorers, the following parts are the top sellers:
- Stabilizer Bar Link Kit (11919615) – $47.99
- Stabilizer Bar Link Kit (11919598) – $47.99
- Suspension Stabilizer Bar Bushing Kit (10413208) – $21.49
What’s the price range for 2011 Ford Explorer Steering and Chassis Parts?
Steering and Chassis Part prices for the 2011 Ford Explorer start at $9.99 and go up to $1,021.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2011 Ford Explorer?
The average price for Steering and Chassis Parts for the 2011 Ford Explorer is $142.97. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Explorer model years?
What are the cheapest Steering and Chassis Parts for my 2011 Ford Explorer?
The cheapest 2011 Ford Explorer Steering and Chassis Parts we carry in stock are:
- Camber Bolt Kit (10361666) – $9.99
- Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (11703179) – $15.99
- Sway Bar Bushing (50066116) – $15.99
- Suspension Stabilizer Bar Bushing Kit (10413208) – $21.49
- TIE ROD END (50191584) – $25.99
What are the top-rated Steering and Chassis Parts that fit the 2011 Ford Explorer?
Out of 297 reviews by customers, our 2011 Ford Explorer Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2011 Ford Explorer and their top-rated products:
- Sway Bars
- Front Right Suspension Stabilizer Bar Link (11315420) – $53.99
- Suspension Stabilizer Bar Link (10225532) – $58.99
- Suspension Stabilizer Bar Link (10225450) – $58.99
What types of Steering and Chassis Parts do you sell for my 2011 Ford Explorer?
As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2011 Ford Explorer:
Can I get help with 2011 Ford Explorer Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.
What is your return policy for Ford Explorer Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Ford Explorer Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
