2011 Ford Escape Steering and Chassis Parts

Essential Steering and Chassis Parts for 2011 Ford Escapes

MOOG – Camber Adjusting Kit (Part No.K90473)

Camber Adjusting Kit

from

$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621661)

Control Arm and Ball Joint Assembly

from

$58.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)

Tapered Roller Bearing

from

$8.79
Product Features:
  • Brand may vary by location
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

MOOG – Toe Adjuster (Part No.K100382)

Toe Adjuster

from

$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Replacement Toe Bolt Kit is a direct replacement and will restore
  • Greaseable design alleviates bolt corrosion and allows for ease
  • Adjustment Range: +/- 2.0
  • Easy to install
  • Construction and design validated by MOOG engineers
See More

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Rare Parts – Sway Bar Frame Bushing (Part No.RP22219)

Sway Bar Frame Bushing

from

$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Ball Joint (Part No.K500135)

Ball Joint

from

$36.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Carquest Premium – TIE ROD END (Part No.310-720753)

TIE ROD END

from

$20.99
TIE ROD END

Carquest Premium – Power Steering Return Hose, 9mm Male Captive "O" Ring x 3/8" Female Quick Connect (Part No.40299)

Power Steering Return Hose, 9mm Male Captive "O" Ring x 3/8" Female Quick Connect

from

$68.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90473)

Camber Bolt Kit

from

$17.99
Camber Bolt Kit

Motorcraft – REGULATOR ASY (Part No.WPT-169)

REGULATOR ASY

from

$24.99
REGULATOR ASY

CTR – Sway Bar Link (Part No.L1030380683CTR)

Sway Bar Link

from

$27.17
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K80104)

Suspension Stabilizer Bar Link Kit

from

$27.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

First Equipment Quality – Sway Bar Link (Part No.L1030163721FEQ)

Sway Bar Link

from

$9.25
The FEQ Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Dorman – Right Loaded Steering Knuckle (Part No.698-404)

Right Loaded Steering Knuckle

from

$409.99
Our loaded steering knuckle kit makes replacing the assembly a bolt-on solution for an easy installation. Our steering knuckle kit includes everything needed for a complete repair, including the bearing, hub, backing plate, and axle nut.

Product Features:
  • Right Loaded Steering Knuckle.
  • Right Loaded Steering Knuckle.
  • Our loaded steering knuckle kit makes replacing the assembly a bolt-on solution for an easy installation. Our steering knuckle kit includes everything needed for a complete repair, including the bearing, hub, backing plate, and axle nut.
  • Direct replacement for a proper fit every time
  • Installation components are E-coated for extra protection against rust and corrosion
See More

Dorman – Right Loaded Steering Knuckle (Part No.698-376)

Right Loaded Steering Knuckle

from

$365.99
Fixing a worn wheel bearing usually requires a difficult procedure using a shop press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install.

Product Features:
  • Right Loaded Steering Knuckle.
  • Right Loaded Steering Knuckle.
  • Fixing a worn wheel bearing usually requires a difficult procedure using a shop press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install.
  • Pre-pressed assembly – this steering knuckle kit includes all necessary components ready for install right out of the box
  • Saves hours – eliminates work required to replace individual corroded components
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2006)

Remanufactured Rack and Pinion Assembly

from

$348.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1A-2007)

Remanufactured Rack and Pinion Assembly

from

$944.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Dorman – Intermediate Steering Shaft (Part No.425-358)

Intermediate Steering Shaft

from

$119.99
This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.

Product Features:
  • Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
  • Durable materials – this shift boot is manufactured from quality materials for durability.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.37199)

Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring - with Switch Port

from

$126.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 18mm Pressure Union – with Switch Port (Part No.37307)

Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 18mm Pressure Union - with Switch Port

from

$232.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K150289)

Rack & Pinion Bellows Kit

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – R & P Bellows (Part No.RP57368)

R & P Bellows

from

$34.99
R & P Bellows

Dorman – Left Steering Knuckle (Part No.698-093)

Left Steering Knuckle

from

$108.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Right Steering Knuckle (Part No.698-092)

Right Steering Knuckle

from

$107.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Right Steering Knuckle (Part No.698-214)

Right Steering Knuckle

from

$258.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Upgrade your 2011 Ford Escape with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2011 Ford Escape, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Escape functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Steering and Chassis Parts for the 2011 Ford Escape, designed to meet your needs without breaking the bank. From Sway Bar replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2011 Ford Escape at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $4.99 to $497.94, with an average price of $93.25. Our 74 Steering and Chassis Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2011 Ford Escape without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Ford Escape, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Driveworks, Moog, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Driveworks and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $4.99, and at an average 4 stars rating. With 2,149 customer reviews and counting, our 2011 Ford Escape Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Ford Escape is always ready to roll. We’re committed to providing you with everything you need to keep your Escape in top shape, all in one place. Start shopping confidently below for your 2011 Ford Escape!

Best-Selling Sway Bars for 2011 Ford Escapes

Enhance the driving experience in your Ford with 16 quality Sway Bar components, starting at $13.79.

MOOG – Stabilizer Bar Link (Part No.K750571)

Stabilizer Bar Link

from

$56.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201312)

Stabilizer Bar Bushing Kit

from

$20.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

MOOG – Stabilizer Bar Link (Part No.K80296)

Stabilizer Bar Link

from

$62.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Driveworks – Sway Bar Link Kits (Part No.DW-K80296)

Sway Bar Link Kits

from

$24.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201311)

Stabilizer Bar Bushing Kit

from

$13.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Dorman – Rear Sway Bar Bushing Bracket Kit (Part No.928-541)

Rear Sway Bar Bushing Bracket Kit

from

$49.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Sway Bar Link (Part No.RP22075)

Sway Bar Link

from

$47.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

ACDelco – Advantage Suspension Stabilizer Bar Link (Part No.L1030579207ACD)

Advantage Suspension Stabilizer Bar Link

from

$69.30
ACDelco Advantage Suspension Stabilizer Bar Links connect the ends of your vehicle’s stabilizer bar near the wheels, and allow the bar to function in controlling body roll. These replacement components contain a forged CNC-machined shell, compressed bushing material, case-hardened studs, and constant-torque pivot joints for high-quality performance, strength, and durability. ACDelco Advantage Suspension Stabilizer Bar Links offer quality at an economical price.

Product Features:
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • Coated for corrosion resistance and long life
  • Greasable design where applicable, for easy maintenance and longevity
  • Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
  • Forged CNC-machined shell provides high-quality, precision-made performance and additional strength
  • Case-hardened studs with rolled threads for strength and cleanliness
  • Heat-treated forging for enhanced part quality and durability
See More

Whiteline – Sway Bar Link (Part No.KLC140-255)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Sway Bar Link (Part No.KLC140-295)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Sway Bar Link (Part No.W23180)

Sway Bar Link

from

$74.99
Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5090)

Stabilizer End Link

from

$50.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Corrosion resistant coatings
  • Includes components and hardware necessary for a complete replacement
  • Hardware functionality matches original design requirements
  • Application specific for this vehicle
See More

Carquest Premium – Stabilizer Bar Link (Part No.512-425999)

Stabilizer Bar Link

from

$40.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Stabilizer Bar Link (Part No.510-74194)

Stabilizer Bar Link

from

$29.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

CTR – Sway Bar Link (Part No.L1030380683CTR)

Sway Bar Link

from

$27.17
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rare Parts – Sway Bar Fr Bush (Part No.RP22623)

Sway Bar Fr Bush

from

$24.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Most Popular 2011 Ford Escape Power Steering Parts

Customize your Ford with 13 Power Steering Parts products like Power Steering Pressure Hoses, Power Steering Return Hoses, and Rack & Pinions, all priced under $450.28.

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Power Steering Oil Cooler Heavy Duty

from

$36.99
3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Heavy-duty power steering oil cooler
  • Size: 3/4″ x 5″ x 9-1/4″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3087)

Steering Rack Boot Kit

from

$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2006)

Remanufactured Rack and Pinion Assembly

from

$348.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K150289)

Rack & Pinion Bellows Kit

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Cardone – Steering Rack (Part No.M10002419448CAR)

Steering Rack

from

$450.28
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:
  • Protective coating applied to each unit, where applicable, to extend the life of the unit
  • 100% performance testing to ensure perfect fit, function and reliable performance
  • 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
  • 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
  • Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
  • Valve housings, where applicable, have polished micro-finish sleevings for durability
  • Built to meet or exceed O.E.M. performance
See More

Motorcraft – P/S Return Hose (Part No.M2016362178MTR)

P/S Return Hose

from

$164.43
P/S Return Hose

Motorcraft – REGULATOR ASY (Part No.WPT-169)

REGULATOR ASY

from

$24.99
REGULATOR ASY

Dorman – RACK BELLOW (Part No.541-530)

RACK BELLOW

from

$22.99
RACK BELLOW

Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)

Tapered Roller Bearing

from

$8.79
Product Features:
  • Brand may vary by location
See More

Top Picks for 2011 Ford Escape Tie Rods

Upgrade Ford Escapes with top-quality Tie Rods parts, including 10 OEM and aftermarket selections for your 2011 model.

MOOG – Tie Rod End (Part No.ES800846)

Tie Rod End

from

$50.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.EV800911)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Assembled in the USA
  • TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
See More

Carquest Premium – Tie Rod End (Part No.310-426018)

Tie Rod End

from

$36.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Tie Rod End (Part No.700-426033)

Tie Rod End

from

$39.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Thread locking compound included.
See More

Beck/Arnley – Tie Rod End (Part No.101-7636)

Tie Rod End

from

$57.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Rare Parts – Tie Rod End (Part No.RP29279)

Tie Rod End

from

$70.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Beck/Arnley – Tie Rod End (Part No.101-7663)

Tie Rod End

from

$61.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Rare Parts – Tie Rod End (Part No.RP29385)

Tie Rod End

from

$52.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

CTR – Tie Rod End (Part No.M3010335776CTR)

Tie Rod End

from

$45.43
Tie Rod End

CTR – Tie Rod End (Part No.M3010428521CTR)

Tie Rod End

from

$44.88
Tie Rod End

In-Demand Steering Shafts for 2011 Ford Escapes

Select from 1 premium Steering Shafts parts for your 2011 Ford Escape.

Dorman – Intermediate Steering Shaft (Part No.425-358)

Intermediate Steering Shaft

from

$119.99
This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.

Product Features:
  • Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
  • Durable materials – this shift boot is manufactured from quality materials for durability.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
See More

Most Sold 2011 Ford Escape Ball Joints

Explore our best-selling Ford parts for the 2011 Escape among 22 OEM and aftermarket options starting from $49.99.

MOOG – Ball Joint (Part No.K80107)

Ball Joint

from

$77.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Ball Joint (Part No.DW-K80107)

Ball Joint

from

$49.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK623210)

Control Arm and Ball Joint Assembly

from

$103.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK623209)

Control Arm and Ball Joint Assembly

from

$103.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-232647B)

Suspension Control Arm And Ball Joint Assembly

from

$113.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-232648B)

Suspension Control Arm And Ball Joint Assembly

from

$113.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621661)

Control Arm and Ball Joint Assembly

from

$58.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621454)

Control Arm and Ball Joint Assembly

from

$75.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Dorman – Suspension Control Arm (Part No.521-959)

Suspension Control Arm

from

$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621664)

Control Arm and Ball Joint Assembly

from

$97.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621663)

Control Arm and Ball Joint Assembly

from

$102.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621455)

Control Arm and Ball Joint Assembly

from

$77.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Dorman – Suspension Control Arm (Part No.522-320)

Suspension Control Arm

from

$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.522-319)

Suspension Control Arm

from

$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.521-960)

Suspension Control Arm

from

$69.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP12568)

Control Arm with Ball Joint

from

$246.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP12567)

Control Arm with Ball Joint

from

$142.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP12569)

Control Arm with Ball Joint

from

$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP12570)

Control Arm with Ball Joint

from

$87.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK80115)

Suspension Control Arm and Ball Joint Assembly

from

$65.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621457)

Control Arm and Ball Joint Assembly

from

$59.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621456)

Control Arm and Ball Joint Assembly

from

$56.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Top-Rated Steering and Chassis Parts Brands For Your 2011 Ford Escape

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2011 Ford Escapes. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2011 Escape start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2011 Ford Escape Steering and Chassis Parts

When it comes to maintaining or upgrading your 2011 Ford Escape, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2011 Ford Escape. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $25.44. Plus, with over 127 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Transmission Oil Cooler Reinstallation Kit
from
$20.79

(4)

Transmission Oil Cooler Reinstallation Kit

“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”

Popular Driveworks 2011 Ford Escape Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2011 Ford Escape owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2011 Escape, Advance Auto Parts carries a full inventory of 6 Driveworks Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $4.99 to $49.99, plus, with more than 83 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Taper Bearing Cup
from
$4.99
This product is not rated

Taper Bearing Cup

“”

Tapered Roller Bearing
from
$8.79
This product is not rated

Tapered Roller Bearing

“”

Camber Bolt Kit
from
$24.99

(1)

Camber Bolt Kit

“Adjust my alignnent”

FAQs for 2011 Ford Escape Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2011 Ford Escapes?

Out of 74 Steering and Chassis Parts that fit 2011 Ford Escapes, the following parts are the top sellers:

What’s the price range for 2011 Ford Escape Steering and Chassis Parts?

Steering and Chassis Part prices for the 2011 Ford Escape start at $4.99 and go up to $497.94 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2011 Ford Escape?

The average price for Steering and Chassis Parts for the 2011 Ford Escape is $93.25. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Escape model years?

Yes, we currently carry Steering and Chassis Parts for 22 model years of Ford Escapes between 2001 and 2023. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2011 Ford Escape?

The cheapest 2011 Ford Escape Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2011 Ford Escape?

Out of 2,149 reviews by customers, our 2011 Ford Escape Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2011 Ford Escape and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2011 Ford Escape?

Can I get help with 2011 Ford Escape Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Escape Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Escape Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.