2011 Ford E-150 Drive Shafts and Axles

Name: Universal Joint
Brand: Spicer
SKU: 5-1350X
Price: 44.99 USD
Rating: 4.0 (7 reviews)

Find your specific 2011 Ford E-150 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2011 Ford E-150 Drive Shafts and Axles

from

$44.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$42.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$453.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$434.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$219.99

Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
U-bolt style

from

$7.99

Product Features:

Pinion yoke dust shield
Fits Dana Spicer 60 and 70

from

$20.29

This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.93

Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement for a proper fit every time
High quality steel construction
Conveniently available in many styles and in packs of different quantities
Dorman’s Spindle Nuts are constructed to strict engineering quality standards

from

$16.99

9.75″ Ford C-Clip.

Product Features:

C-clip
Fits Ford 9.75″

from

$14.99

Dana 60 semi-float C-clip.

Product Features:

C-clip
Fits Dana Spicer 60

from

$8.28

Wheel Seal

from

$7.99

Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

Product Features:

Rear axle seal
2.530″ O.D.

from

$9.49

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

BEARING – CRB

from

$29.49

Drive Shaft Center Support

from

$73.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$39.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1960-2015
Weight approx: 3 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
NO STUDS

from

$34.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.48 INCH / 63 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
NOT PICTURED: TWO DUST SHIELDS

from

$22.79

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$35.49

AXLE BEARING

from

$97.49

Wheel Bearing

from

$13.99

CONE

from

$7.99

Wheel Lug Stud

from

$47.99

Plug adapter for extra-large clamshell. No Return.

Product Features:

Plug adapter for Extra Large clamshell
Fits carrier bearing puller

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

Popular 2011 Ford E-150 Drive Shafts and Axles Categories

Axle Shaft Universal Joints

Drive Shaft Support Bolts

Drive Shaft Center Supports

Center Support Bearings

Drive and Prop Shaft Assemblies

Bearing Pullers

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Axle Shaft Bearings

Axle Vents

Rear Axle Shaft Bearings

Axle Nuts

Axle Shaft Seal Retainers

Axle Shaft Studs

Maybe you’re in the middle of a full rebuild of that 2011 Ford E-150. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 29 different Drive Shafts and Axles in our inventory ranging from $1.99 to $883.99. That means you can find the exact parts or products you need to keep that 2011 Ford E-150 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Ford E-150. Spicer, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2011 Ford E-150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 504 reviews in this category, some of the top rated parts include Universal Joint with 5.0 stars and Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2011 Ford E-150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2011 Ford E-150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Ford E-150 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts and Axle Vents categories, plus more. For a 2011 Ford E-150, our most popular Dorman – Help Drive Shafts and Axles include:

from $20.29

(1)

Driveshaft Flange Bolts

Drive Shaft Support Bolts

from $9.49

(6)

Rear Axle Differential Vent

Axle Vents

Top 2011 Ford E-150 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 2011 Ford E-150. Popular National parts include:

from $73.99

(17)

Multi Purpose Bearing

Drive Shaft Center Supports

FAQs for 2011 Ford E-150 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2011 Ford E-150?

Out of 29 Drive Shafts and Axles for the 2011 Ford E-150, the most popular in our inventory are:

from $42.99

(5)

Universal Joint

Axle Shaft Universal Joints

from $44.99

(7)

Universal Joint

Axle Shaft Universal Joints

from $29.49

(4)

Drive Shaft Center Support

Drive Shaft Center Supports

What are the top-rated 2011 Ford E-150 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2011 Ford E-150 based on customer reviews/ratings are:

from $15.99

(1)

Universal Joint

“Exact fit and worked perfectly”

from $7.99

(1)

Wheel Lug Stud

“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”

2011 Ford E-150 Drive Shafts and Axles

More 2011 Ford E-150 Drive Shafts and Axles

Essential 2011 Ford E-150 Drive Shafts and Axles

Spicer – Universal Joint (Part No.5-1350X)

Spicer – Universal Joint (Part No.5-178X)

Dorman – Rear Drive Shaft: Adjustable (Part No.946-559)

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-2020)

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41027)

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Dorman – Axle Spindle Nut (Part No.K4030212888DOR)

Yukon Gear – 9.75" Ford C-Clip (Part No.33248)

Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)

Autopart International Inc – Wheel Seal (Part No.K80102008285API)

Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

Dorman – Rear Axle Differential Vent (Part No.924-263)

FAG US – BEARING – CRB (Part No.102549)

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)

National – Multi Purpose Bearing (Part No.HB-88508-A)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

FAG US – AXLE BEARING (Part No.FC68302)

NTN – Wheel Bearing (Part No.K8000345509NTN)

FAG US – CONE (Part No.KL68149)

Yukon Gear – Wheel Lug Stud (Part No.33571)

Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Popular 2011 Ford E-150 Drive Shafts and Axles Categories