2011 Dodge Durango Bodies and Fender Parts

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

New Standard Replacement Passenger Side Fender Liner

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.

While many side accessories feature a universal track mounting system for easier installation and inventory requirements, the ARIES VersaTrac mounting system takes things a step further. VersaTrac uses a single set of vehicle-specific brackets to accommodate different side accessory options. This not only means different finish options but also different products entirely. With the brackets installed, any side bar or running board equipped with the VersaTrac mounting system can be attached or swapped out whenever desired. The VersaTrac mounting system saves you time and money. It eliminates the need to purchase and install an entirely new set of mounting brackets with each new side accessory. The mounting brackets are available for purchase as a stand-alone item or as part of a complete kit with compatible side bars and running boards. Use the application information to determine which part numbers will fit your vehicle.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

“ARIES AdvantEDGE side bars do away with the common, rounded look of other side bars, nerf bars and running boards, featuring an angular, eight-sided tube profile and powder-coated all-aluminum construction. The angular edges provide a clear-cut, uncompromising accent for the look of today’s trucks. Made from 5-1/2″” wide, eight-sided, extruded aluminum tubing, AdvantEDGE running boards are strong, lightweight and impervious to rust, offering a solid step that is built to face the elements and outlast them. They also come with die-cast aluminum end caps and a stamped aluminum tread. The aluminum treads provide a long-lasting, non-skid stepping surface that will not crack or fade in the sun. ARIES AdvantEDGE side bars are also marked for their easy, custom-fit installation. They feature the ARIES VersaTrac mounting system with brackets that are made from powder-coated steel and built for specific vehicles. This particular set of custom running boards fits specific years of the Dodge Durango (see application info to verify compatibility). The high-strength steel brackets mount using pre-existing holes, and the aluminum running boards attach to the brackets with heavy-duty hardware. The VersaTrac mounting system makes installation simple and customizable, allowing the side bars to be swapped out at any time with other side steps or running boards that use the VersaTrac system. Setting yourself apart is simple with the ARIES AdvantEDGE series. In addition to these truck side steps, we also offer the AdvantEDGE bull bar and AdvantEDGE headache rack, featuring the same all-aluminum construction and eight-sided tube profile. For a fully customized look to match your pickup, AdvantEDGE side bars are available in two finish options, including carbide black powder coat and chrome powder coat.”

Auveco products provide OE fit and function.

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

New Standard Replacement Front Lower Valance, Textured Black, For Use With Textured Lower Cover

New Standard Replacement Front Lower Valance Panel, Textured Black, For Use With Painted Lower Cover

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES AeroTread running boards. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of AeroTread running boards, you get a custom fit for your unique SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Laser measured mud flaps are custom fit to protect your vehicle fenders and exterior from rocks, mud, road grime and other debris. No drilling is required and our mud flaps install in minutes.

This liftgate release motor is designed to match the fit and function of the original motor on specified applications, and is engineered for reliable performance and durability.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

New Standard Replacement Passenger Side Fender Liner/Splash Shield

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

New Standard Replacement Driver Side Fender Liner/Splash Shield

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Bully’s time proven aluminum side step is the most convenient way to add entry access to your truck or SUV. Constructed from a one piece cast ensures a strong design.

“For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″” wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.”

New Economy Replacement Passenger Side Fender

New Standard Replacement Driver Side Fender, Without Emblem Holes

New Standard Replacement Driver Side Fender, With Emblem Holes