2011 Chevrolet Silverado 2500 HD V-Belts

Your 2011 Chevrolet Silverado 2500 HD might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the V-Belts you desperately need.

We currently carry 5 V-Belts to choose from for your 2011 Chevrolet Silverado 2500 HD, and our inventory prices range from as little as $25.13 up to $77.97.

On top of low prices, Advance Auto Parts offers 3 different trusted brands of V-Belts for the 2011 Chevrolet Silverado 2500 HD. We only sell parts from trusted brands like ContiTech so that you can find quality parts you can count on.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our V-Belts stock in-person!

V-Belts for Your 2011 Chevrolet Silverado 2500 HD

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000230927CON)

Multi Rib (Serpentine) Belt

from

$50.47
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Mitsuboshi – Stretch Poly Rib Serpentine Belt (Part No.W10001514365MBL)

Stretch Poly Rib Serpentine Belt

from

$37.87
Mitsuboshi stretch belts, are specifically designed for 2 to 4 point drives that do not require tensioning. Although these belts may look like standard poly rib belts, they are very different. These specially designed belts have self-tensioning capabilities required by specific original equipment (OE) drives designed for a “stretch” belt. Vehicles that are manufactured with “stretch” belts must replace those belts with “stretch” belts. These belts are not interchangeable with standard constructed belts of the same size. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. “Stretch” belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve. Dismounting and reusing stretch belts is not recommended. A new belt should be installed anytime one is removed.

Product Features:
  • Wear resistant EPDM rib material
  • Highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord
  • Designed to elongate over the fixed pulley system
  • Provides the proper tension maintenance
See More

ContiTech – Drive V-Belt (Part No.W1000452392CON)

Drive V-Belt

from

$77.97
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000230927BAN)

Multi Rib (Serpentine) Belt

from

$30.34
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Bando – Drive Belt (Part No.W10002440902BAN)

Drive Belt

from

$25.13
Drive Belt

FAQs for 2011 Chevrolet Silverado 2500 HD V-Belts

What are the most popular V-Belts for the 2011 Chevrolet Silverado 2500 HD?

With 3 brands you can trust, our most popular V-Belts for the 2011 Chevrolet Silverado 2500 HD parts are:
Multi Rib (Serpentine) Belt
from $50.47
This product is not rated
Multi Rib (Serpentine) Belt
V-Belts
Stretch Poly Rib Serpentine Belt
from $37.87
This product is not rated
Stretch Poly Rib Serpentine Belt
V-Belts
Drive V-Belt
from $77.97
This product is not rated
Drive V-Belt
V-Belts