2011 Chevrolet Corvette Cooling and Climate Controls

Name: Multi-Purpose Relay
Brand: Carquest Premium
SKU: RAC1292
Price: 19.49 USD

Below you will find various in-demand Chevrolet Cooling and Climate Controls, components and accessories for your 2011 Corvette. Advance Auto Parts has popular Corvette parts like Air Conditioning Parts, Heating Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Corvette model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2011 Chevrolet Corvette Cooling and Climate Controls below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2011 Chevrolet Corvette Cooling and Climate Controls Categories

Radiators

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Thermostats

ABS Control Relays

Radiator Fan Motors

AC Refrigerant Hose Fitting

Air Blend Door Actuators

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Cabin Air Temperature Sensors

Coolant Reservoir Caps

AC Harness Connectors

AC Condensers

AC Compressor Cut-Out Relays

Water Pump Install. Kits

HVAC Automatic Temperature Control (ATC) Relays

AC Caps and Valve Core Kits

Thermostat Housings

Thermostat Seals

AC Clutch Coil Connectors

AC O-Ring and Gasket Kits

Blower Motor Resistor Connectors

Water Pump Gaskets

Blower Relays

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

Trim and Interior Tools

AC Compressor Cut-Off Switches

HVAC Blower Motor Connectors

AC Pressure Transducer Connectors

Coolant Fan Motor Connectors

AC Switch Connectors

AC Refrigerant Pressure Sensors

Radiator Cap Adapters

Water Pump O-Rings

Engine Coolant Water Inlet Seals

A/C Expansion Valve Filter

Engine Water Pump and Thermostat Assembly

HVAC Pressure Transducers

Thermostat Shims

HVAC Air Door Actuator Kit

Engine Auxiliary Water Pump Connectors

AC Compressor Cut-Off Relay Harness Connector

Engine Coolant Crossover Pipe Kit

Essential Cooling and Climate Controls for 2011 Chevrolet Corvettes

from

$19.49

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$209.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$1092.00

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100 percent tested and calibrated

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$30.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$17.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

Guaranteed fitment
Also known as an “AC Servo”
Replacement of failed blend door actuator instantly restores control of heating and air conditioning vent selection and airflow temperature blending
Direct-fit OE replacement design for easy plug-and-play installation
Manufactured using high-quality materials to withstand internal vent condensation that can corrode other HVAC blend door actuators
Modern circuitry resists overheating and burnout for long-term reliability
Factory tested for proper performance

from

$327.99

Manufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the manufacturing process.

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance
Manufactured Compressors meet or exceed OE specifications
Manufactured Compressors are validated for the equivalent of 100,000 miles
Manufactured Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Manufactured Compressors are individually vacuum, pressure, and Helium Mass Spectrometer tested to ensure no leaks
Manufactured Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$20.79

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$7.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$11.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$43.99

WIRE CONNECTOR

from

$126.99

This kit contains air door actuators designed to ensure the proper flow and blend of air between modes that can include fresh air/recirculation, hot/cold, and floor vent/defrost. The actuators in this kit are engineered for specified vehicles.

from

$14.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$39.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$44.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$7.49

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$39.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$18.99

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$8.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$44.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$92.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$5.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$8.99

GM Genuine Parts Engine Coolant Thermostat Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help close and prevent coolant from leaking out of your vehicle’s cooling system components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps close and prevent coolant from leaking out of your vehicle’s cooling system components to maintain the proper engine temperature
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$39.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

Upgrade your 2011 Chevrolet Corvette with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2011 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 78 Cooling and Climate Controls for the 2011 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Heating Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2011 Chevrolet Corvette at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.29 to $1,092.00, with an average price of $67.23. Our 78 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 2011 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Chevrolet Corvette, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Felpro, GM Genuine, Factory Air, and more. Felpro Cooling and Climate Controls start at just $6.49 and boast an impressive 4.6 stars average rating from customers. GM Genuine and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $8.99, and at an average 4.5 stars rating. With 2,255 customer reviews and counting, our 2011 Chevrolet Corvette Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 2011 Chevrolet Corvette!

Best-Selling Air Conditioning Parts for 2011 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 26 quality Air Conditioning Part components, starting at $7.49.

show more show less

from

$23.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$8.99

GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repairs leaking A/C system
Restores A/C function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.99

GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$11.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$22.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$8.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$18.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$24.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$33.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$17.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$7.49

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$30.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$41.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$56.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each part meets manufacturing specifications before packaging.

from

$92.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$48.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$601.99

New Compressors are built in a ISO9001:2015 Certified facility. These facilities go through several audits to ensure quality standards in the manufacturing process.

Product Features:

New, with Clutch, with CVC Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
New Compressors meet or exceed OE specifications
New Compressors are validated for the equivalent of 100,000 miles
New Compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
New Compressors come with direct fit connectors for ease of installation and to help eliminate splicing
New Compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor

from

$209.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$69.99

ACDelco GM Original Equipment Multi Purpose Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$43.99

WIRE CONNECTOR

from

$39.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

Most Popular 2011 Chevrolet Corvette Heating Parts

Customize your Chevrolet with 2 Heating Parts products like Heater Cores and HVAC Pressure Transducers, all priced under $73.99.

show more show less

from

$44.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$73.99

Carquest Premium heater cores use advanced engineering methods together with innovative manufacturing technology resulting in a product that meets or exceeds form, fit, and function.

Product Features:

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

Top Picks for 2011 Chevrolet Corvette Blower Motor and Related Products

Upgrade Chevrolet Corvettes with top-quality Blower Motor and Related Products parts, including 5 OEM and aftermarket selections for your 2011 model.

show more show less

from

$35.99

ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$196.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$111.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1.29

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for Length-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

In-Demand Blend Doors for 2011 Chevrolet Corvettes

Select from 5 premium Blend Doors parts for your 2011 Chevrolet Corvette, with prices ranging from $17.99 to $126.99.

show more show less

from

$39.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$61.99

ACDelco GM Original Equipment HVAC Mode Door Actuators are electric motors attached to the HVAC housing that move or actuate the mode doors or flaps, directing the airflow to the desired outlet vents. These original equipment HVAC mode door actuators are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Corrects mode door malfunction caused by a failed actuator
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$29.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$126.99

from

$17.99

Guaranteed fitment
Also known as an “AC Servo”
Replacement of failed blend door actuator instantly restores control of heating and air conditioning vent selection and airflow temperature blending
Direct-fit OE replacement design for easy plug-and-play installation
Manufactured using high-quality materials to withstand internal vent condensation that can corrode other HVAC blend door actuators
Modern circuitry resists overheating and burnout for long-term reliability
Factory tested for proper performance

Most Sold 2011 Chevrolet Corvette Engine Cooling Parts

Explore our best-selling Chevrolet parts for the 2011 Corvette among 38 OEM and aftermarket options starting from $3.29.

show more show less

from

$39.99

ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$7.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$22.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$40.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s 1 piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$7.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$5.49

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$34.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$70.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$64.99

Mr. Gasket Swivel Water Necks are great for engine conversion applications where engine/radiator inlet and outlet ports may be in different locations versus original equipment. The outlet rotates 360 degrees and has a 30 degree angle for versatility. Die-cast aluminum construction is strong, and durably resisting corrosion and is chrome plated for classic looks. It has a thick mounting flange to prevent warping and provide a positive engine coolant seal. Included stainless steel Allen head cap screws mount flush with the top of the flange to provide a smooth, custom look. Designed for use with 1/2 inch radiator hoses.

Product Features:

Neck rotates 360 degrees 30 degree angle for maximum versatility in engine swaps
Die-cast aluminum for strength and durability and resist corrosion
Thick mounting flange prevents warping and provides a positive coolant seal
Chrome-plated for looks
Allen head stainless steel bolt mount flush to flange for custom look
Uses commonly available 1-1/2 radiator hose (casting I.D 1-3/16″)

from

$22.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$39.49

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$477.99

Carquest Premium Radiators offer one of the largest product ranges in the aftermarket, covering more than 95% of the popular automotive and light truck applications. Carquest Premium Radiators meet or exceed original equipment specifications, ensuring that products fit and perform just as well or better than the original parts, providing you peace of mind.

Product Features:

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$3.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$229.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$142.99

New Platinum Pro Radiator, 6.0/6.2/7.0 Liter Engines, With Transmission And Engine Oil Coolers, Without Supercharger, 17 Inch Core

Product Features:

6.0/6.2/7.0 Liter Engines, With Transmission And Engine Oil Coolers, Without Supercharger, 17 Inch Core, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: 5 Year, Limited
Radiator Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$1092.00

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100 percent tested and calibrated

from

$235.99

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$99.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Top-Rated Cooling and Climate Controls Brands For Your 2011 Chevrolet Corvette

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2011 Chevrolet Corvettes. Below you’ll find some of our best rated Cooling and Climate Controls from Felpro, GM Genuine, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 2011 Corvette start at just $6.49 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2011 Chevrolet Corvette Cooling and Climate Controls

When it comes to maintaining or upgrading your 2011 Chevrolet Corvette, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Cooling and Climate Controls, specifically designed for the 2011 Chevrolet Corvette. With over 3 Felpro brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.49, with an average price of just $7.16. Plus, with over 113 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $7.49

(100)

Engine Water Pump Gasket

“Great”

from $7.49

(9)

Engine Water Pump Gasket Kit

“OEM Quality, no rtv needed to make these work which makes it so much faster if you need to replace the water pump again in the future.”

from $6.49

(4)

Engine Coolant Thermostat Housing Seal

“na”

Popular GM Genuine 2011 Chevrolet Corvette Cooling and Climate Controls

GM Genuine auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2011 Chevrolet Corvette owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2011 Corvette, Advance Auto Parts carries a full inventory of 3 GM Genuine Cooling and Climate Controls. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Cooling and Climate Controls range from $8.99 to $35.99, plus, with more than 15 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $12.99

(6)

Air Conditioning System Valve Core

“Use it on my suv”

from $35.99

(2)

Black Multi-Purpose Relay

“The part was reasonably priced and fixed the problem on my truck.”

from $8.99

(7)

Air Conditioning Service Valve

“Thanks”

FAQs for 2011 Chevrolet Corvette Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2011 Chevrolet Corvettes?

Out of 78 Cooling and Climate Controls that fit 2011 Chevrolet Corvettes, the following parts are the top sellers:

Engine Water Pump Gasket (15780035) – $7.49
Standard Thermostat: With Seal, 187 Degrees (10321763) – $34.99
Coolant Temperature Sensor 1TS1001 (12422847) – $22.99

What’s the price range for 2011 Chevrolet Corvette Cooling and Climate Controls?

Cooling and Climate Control prices for the 2011 Chevrolet Corvette start at $1.29 and go up to $1,092.00 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2011 Chevrolet Corvette?

The average price for Cooling and Climate Controls for the 2011 Chevrolet Corvette is $67.23. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Chevrolet Corvette model years?

Yes, we currently carry Cooling and Climate Controls for 70 model years of Chevrolet Corvettes between 1953 and 2026. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2011 Chevrolet Corvette?

The cheapest 2011 Chevrolet Corvette Cooling and Climate Controls we carry in stock are:

Windsheild Garnish Clip-exterior-GM (sold by each) (11224154) – $1.29
Multi-Purpose O-Ring (15780472) – $3.29
Expansion Tank Cap (50184908) – $4.99
Radiator Drain Cocks (17190408) – $5.49
Engine Coolant Thermostat Housing Seal (50260313) – $5.99

What are the top-rated Cooling and Climate Controls that fit the 2011 Chevrolet Corvette?

Out of 2,255 reviews by customers, our 2011 Chevrolet Corvette Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2011 Chevrolet Corvette and their top-rated products:

Blower Motor and Related Products
- Black Multi-Purpose Relay (15730131) – $35.99
Engine Cooling Parts
- Black Multi-Purpose Relay (15730131) – $35.99

What types of Cooling and Climate Controls do you sell for my 2011 Chevrolet Corvette?

As of 3/1/26, these are some of the most in-demand types of Cooling and Climate Controls for a 2011 Chevrolet Corvette:

Can I get help with 2011 Chevrolet Corvette Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Cooling and Climate Controls and more.

What is your return policy for Chevrolet Corvette Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Chevrolet Corvette Cooling and Climate Controls

Carquest Premium – Multi-Purpose Relay (Part No.RAC1292)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.T83904)

Motorad – Engine Water Pump and Thermostat Assembly: With Gaskets, 187 Degrees (Part No.1273-187)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1257)

Autotecnica – Hvac Air Door Actuator (Part No.GM0614515)

Carquest Premium – New GM R4 Lightweight Compressor with Clutch (Part No.T58238)

Carquest Premium – A/C Compressor Wiring Harness (Part No.T37201)

Felpro – Engine Water Pump Gasket Kit (Part No.ES 73010)

Dorman – A/C Service Valve Cap (Part No.902-025)

Victor Reinz – Engine Coolant Thermostat Housing Seal (Part No.71-13578-00)

GM Genuine Parts – WIRE CONNECTOR (Part No.PT3829)

Dorman – HVAC ACTUATOR KIT (Part No.ADAKIT001)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

ACDelco – Multi-Purpose Pigtail (Part No.PT2834)

Factory Air – System Mounted Pressure Transducer (Part No.20915)

Carquest Premium – A/C Expansion Valve Filter (Part No.T39340)

ACDelco – Multi-Purpose Pigtail (Part No.PT1357)

Motorad – Engine Coolant Thermostat Housing Assembly: With Gasket, 195 Degrees (Part No.4820KT)

Dorman – Help – Radiator Drain Cocks (Part No.61133)

Carquest Premium – Multi-Use Connector (Part No.PTA1167)

Carquest – Multi-Purpose Relay (Part No.83A1001)

KAI – A/C Condenser (Part No.CNDDPI3297)

Victor Reinz – Engine Water Pump Gasket (Part No.71-14095-00)

GM Genuine Parts – Water Inlet Seal (Part No.12587397)

Carquest Premium – A/C Orifice Tube – White (Part No.T38623)

Carquest Premium – Blower Motor: without Wheel (Part No.35588)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Dorman – A/C Service Valve Cap (Part No.902-025)

ACDelco – Multi-Purpose Pigtail (Part No.PT1357)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest – Multi-Purpose Relay (Part No.83A1003)

GM Genuine Parts – Gray Multi-Purpose Relay (Part No.13503102)

Carquest – Multi-Purpose Relay (Part No.83A1005)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1237)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1241)

Carquest Premium – Multi-Use Connector (Part No.PTA1091)

Carquest – Multi-Purpose Relay (Part No.83A1013)

Carquest Premium – A/C Expansion Valve Filter (Part No.T39340)

ACDelco – 2-Way Female Gray Multi-Purpose Pigtail (Part No.PT209)

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)

Carquest Premium – AC Pressure Sensor (Part No.ABA1005)

KAI – A/C Condenser (Part No.CNDDPI3297)

Carquest Premium – Multi-Use Connector (Part No.PTA1171)

Carquest Premium – New GM CVC Compressor with Clutch (Part No.T68295)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.T83904)

GM Genuine Parts – Multi-Purpose Pressure Sensor (Part No.15-51343)

GM Genuine Parts – WIRE CONNECTOR (Part No.PT3829)

Carquest Premium – A/C Expansion Valve (Part No.T39242)

Factory Air – System Mounted Pressure Transducer (Part No.20915)

Carquest Premium – HVAC Heater Core (Part No.910596)

GM Genuine Parts – Black Multi-Purpose Relay (Part No.D1780C)

Carquest Premium – Blower Motor: with Wheel (Part No.75892)

GM Genuine Parts – 10-Way Female White Multi-Purpose Pigtail (Part No.PT150)

Carquest Premium – Multi-Use Connector (Part No.PTA2575)

Dorman – Windsheild Garnish Clip-exterior-GM (sold by each) (Part No.700-052)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-108)

GM Genuine Parts – Heating and Air Conditioning Panel Mode Door Actuator (Part No.15-74123)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-134)

Dorman – HVAC ACTUATOR KIT (Part No.ADAKIT001)

Autotecnica – Hvac Air Door Actuator (Part No.GM0614515)

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4514)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Engine Water Pump Gasket Kit (Part No.ES 73010)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

Felpro – Engine Water Pump Gasket (Part No.35635)

Dorman – Help – Radiator Drain Cocks (Part No.61136)

Carquest Premium – Standard Thermostat: With Seal, 187 Degrees (Part No.15158)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Mr. Gasket – Water Neck (Part No.2670)

Carquest Premium – Coolant Temperature Sensor 1TS1001 (Part No.WTC1002)