2011 Cadillac Escalade Drive Shafts and Axles

Essential 2011 Cadillac Escalade Drive Shafts and Axles

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142)

CV Axle Shaft Assembly

from

$138.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Anchor – Center Support Bearing Motor Mount: Center, Rear, 1 Piece (Part No.6092)

Center Support Bearing Motor Mount: Center, Rear, 1 Piece

from

$66.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 07-19; CHEV 07-19; GMC 07-19;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2007-2019
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.00 INCH / 51 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • OCTAGON
  • WITHOUT PLATE
  • WITH STUDS
See More

National – Bearings (Part No.SCH-208)

Bearings

from

$21.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Stub Axle Bearing For GM 8.25" IFS (Part No.18059)

Stub Axle Bearing For GM 8.25" IFS

from

$57.99
Product Features:
  • Stub axle bearing
  • Fits GM 8.25″ IFS
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Drive Shaft (Part No.986-152)

Rear Drive Shaft

from

$695.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.936-534)

Rear Drive Shaft

from

$643.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS (Part No.33369)

Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS

from

$14.99
Stub axle retaining clip snap ring for 8.25″ GM IFS.

Product Features:
  • Outer axle snap ring for GM 8.25″ IFS
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Driveworks – Clutch Release Bearing (Part No.S-B-2010)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$87.01
Wheel Bearing

Dorman – Driveshaft Slip Yoke (Part No.697-560)

Driveshaft Slip Yoke

from

$185.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Dorman – Driveshaft Slip Yoke (Part No.697-558)

Driveshaft Slip Yoke

from

$217.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

from

$24.99
Product Features:
  • Fits GM 8.6″ and 9.5″
  • Sleeve to adapt standard yoke to use late model triple lip pinion seal
See More

Spartan – Drive Axle Assembly; GM SUV 03-06 AWD Axle GT4 (Part No.RAX2177A)

Drive Axle Assembly; GM SUV 03-06 AWD Axle GT4

from

$1605.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spartan – Drive Axle Assembly; GM SUV 09-14 Axle (Part No.RAX0112B)

Drive Axle Assembly; GM SUV 09-14 Axle

from

$1642.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Spartan – Drive Axle Assembly; GM Posi Truck Axle GU6 (Part No.RAXP0105B)

Drive Axle Assembly; GM Posi Truck Axle GU6

from

$1805.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Driveworks – Axle Shaft Seal (Part No.S-710648)

Axle Shaft Seal

from

$10.79
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)

Axle Seal For '88 And Newer GM 8.5" Chevy C10

from

$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits 1988 and up GM half ton truck
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – 8.25" IFS (99 & Newer) Stub Axle Side Seal (Part No.30273)

8.25" IFS (99 & Newer) Stub Axle Side Seal

from

$73.99
8.25″ IFS (99 & newer) stub axle side seal (2 needed).Yukon Mighty seal.

Product Features:
  • Front stub axle seal
  • Fits 1999 and up GM 8.25″ IFS
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

2011 Cadillac Escalade Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2011 Cadillac Escalade. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 38 different Drive Shafts and Axles in our inventory ranging from $6.99 to $1,912.99. That means you can find the exact parts or products you need to keep that 2011 Cadillac Escalade running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Cadillac Escalade. Carquest Premium, National, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2011 Cadillac Escalade, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 912 reviews in this category, some of the top rated parts include Differential Axle Seal with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2011 Cadillac Escalade rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2011 Cadillac Escalade Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Cadillac Escalade demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Escalade the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular National Drive Shafts and Axles

We carry National parts in our stock across Axle Shaft Seals and Drive Shaft Bearings categories, plus more. For a 2011 Cadillac Escalade, our most popular National Drive Shafts and Axles include:
Multi Purpose Seal
from $17.99
(22)
Multi Purpose Seal
Axle Shaft Seals
Bearings
from $14.79
(3)
Bearings
Drive Shaft Bearings

Top 2011 Cadillac Escalade Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2011 Cadillac Escalade. Popular Carquest Premium parts include:
New CV Axle
from $151.99
(116)
New CV Axle
Drive Shaft and Axles

FAQs for 2011 Cadillac Escalade Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2011 Cadillac Escalade?

Out of 38 Drive Shafts and Axles for the 2011 Cadillac Escalade, the most popular in our inventory are:
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Wheel Bearing: Direct Fit, 1 Piece
from $37.49
(5)
Wheel Bearing: Direct Fit, 1 Piece
Axle Shaft Bearings
Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS
from $14.99
This product is not rated
Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS
Axle Shaft Snap Rings

What are the top-rated 2011 Cadillac Escalade Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2011 Cadillac Escalade based on customer reviews/ratings are:
Differential Axle Seal
from $6.99
(1)
Differential Axle Seal
“It worked for me.”